-----Original Message----- From: Fabio Estevam [mailto:festevam@gmail.com] Sent: 2019年5月4日 1:05 To: sbabic@denx.de Cc: dl-uboot-imx uboot-imx@nxp.com; u-boot@lists.denx.de; pjtexier@koncepto.io; lukas.auer@aisec.fraunhofer.de; offougajoris@gmail.com; trini@konsulko.com; Fabio Estevam festevam@gmail.com Subject: [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN
Commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver") causes some i.MX boards that were converted to DM, such as warp7, to fail to boot.
As explained by Lukas Auer:
"With the patch, U-Boot probes the drivers for devices under simple-bus device tree nodes in the pre-relocation device model. The default value of CONFIG_SYS_MALLOC_F_LEN (0x400) leaves U-Boot with not enough memory to do this, causing it to hang."
Fix this problem by providing a convenient default value for CONFIG_SYS_MALLOC_F_LEN.
Reported-by: Pierre-Jean Texier pjtexier@koncepto.io Suggested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Signed-off-by: Fabio Estevam festevam@gmail.com
Changes since v1:
- Move the default setting to the main Kconfig and make it depend on i.MX
Kconfig | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Kconfig b/Kconfig index 7a5491bd67..fd4ff42c17 100644 --- a/Kconfig +++ b/Kconfig @@ -138,6 +138,8 @@ config SYS_MALLOC_F_LEN depends on SYS_MALLOC_F default 0x1000 if AM33XX default 0x2800 if SANDBOX
- default 0x2000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_MX7 || \
ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5)
Reviewed-by: Peng Fan peng.fan@nxp.com
-- 2.17.1