Hi Fabio,
Fabio Estevam writes:
Hi Peter,
[Adding Jon and Baruch]
On Thu, Sep 6, 2018 at 9:37 AM, Peter Robinson pbrobinson@gmail.com wrote:
It seems like the Wandboard Quad revB I have also works fine so It might just be a regression in the mx6cuboxi target.
I don't have access to a hummingboard2 to investigate it.
Does this issue also happen on a mx6q cuboxi?
Are you able to run a bisect?
I tested current master successfully on Hummingboard2 with i.MX6 Solo (SOM rev 1.5):
U-Boot SPL 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300) Trying to boot from MMC1
U-Boot 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)
CPU: Freescale i.MX6SOLO rev1.3 996 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 38C Reset cause: POR Board: MX6 HummingBoard2 (som rev 1.5) DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Net: FEC Error: FEC address not set.
Hit any key to stop autoboot: 0 =>
... and with i.MX6Q (SOM rev 1.3):
U-Boot SPL 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300) Trying to boot from MMC1
U-Boot 2018.09-rc3-00026-g4cdeda511f80 (Sep 06 2018 - 18:30:30 +0300)
CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 27C Reset cause: POR Board: MX6 HummingBoard2 DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment
No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: serial Err: serial Card did not respond to voltage select! Net: FEC Hit any key to stop autoboot: 0 =>
I don't have handy at the moment the exact same combination of HB2 with i.MX6Q SOM rev 1.5.
I built mx6cuboxi_defconfig with no changes using Linaro GCC 7.3-2018.05.
baruch
-- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -