Some CONFIG options can be implied by others and this can help to reduce the size of the defconfig files. For example, CONFIG_X86 implies CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to each of the x86 defconfig files.
Add a -i option which searches for such options.
Signed-off-by: Simon Glass sjg@chromium.org ---
tools/moveconfig.py | 215 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 214 insertions(+), 1 deletion(-)
diff --git a/tools/moveconfig.py b/tools/moveconfig.py index ed576f4b83..f33203d51b 100755 --- a/tools/moveconfig.py +++ b/tools/moveconfig.py @@ -128,6 +128,69 @@ To process CONFIG_CMD_FPGAD only for a subset of configs based on path match: ./tools/moveconfig.py -Cy CONFIG_CMD_FPGAD -d -
+Finding implied CONFIGs +----------------------- + +Some CONFIG options can be implied by others and this can help to reduce +the size of the defconfig files. For example, CONFIG_X86 implies +CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and +all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to +each of the x86 defconfig files. + +This tool can help find such configs. To use it, first build a database: + + ./tools/moveconfig.py -b + +Then try to query it: + + ./tools/moveconfig.py -i CONFIG_CMD_IRQ + CONFIG_CMD_IRQ found in 311/2384 defconfigs + 44 : CONFIG_SYS_FSL_ERRATUM_IFC_A002769 + 41 : CONFIG_SYS_FSL_ERRATUM_A007075 + 31 : CONFIG_SYS_FSL_DDR_VER_44 + 28 : CONFIG_ARCH_P1010 + 28 : CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + 28 : CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + 28 : CONFIG_SYS_FSL_ERRATUM_IFC_A003399 + 25 : CONFIG_SYS_FSL_ERRATUM_A008044 + 22 : CONFIG_ARCH_P1020 + 21 : CONFIG_SYS_FSL_DDR_VER_46 + 20 : CONFIG_MAX_PIRQ_LINKS + 20 : CONFIG_HPET_ADDRESS + 20 : CONFIG_X86 + 20 : CONFIG_PCIE_ECAM_SIZE + 20 : CONFIG_IRQ_SLOT_COUNT + 20 : CONFIG_I8259_PIC + 20 : CONFIG_CPU_ADDR_BITS + 20 : CONFIG_RAMBASE + 20 : CONFIG_SYS_FSL_ERRATUM_A005871 + 20 : CONFIG_PCIE_ECAM_BASE + 20 : CONFIG_X86_TSC_TIMER + 20 : CONFIG_I8254_TIMER + 20 : CONFIG_CMD_GETTIME + 19 : CONFIG_SYS_FSL_ERRATUM_A005812 + 18 : CONFIG_X86_RUN_32BIT + 17 : CONFIG_CMD_CHIP_CONFIG + ... + +This shows a list of config options which might imply CONFIG_CMD_EEPROM along +with how many defconfigs they cover. From this you can see that CONFIG_X86 +implies CONFIG_CMD_EEPROM. Therefore, instead of adding CONFIG_CMD_EEPROM to +the defconfig of every x86 board, you could add a single imply line to the +Kconfig file: + + config X86 + bool "x86 architecture" + ... + imply CMD_EEPROM + +That will cover 20 defconfigs. Many of the options listed are not suitable as +they are not related. E.g. it would be odd for CONFIG_CMD_GETTIME to imply +CMD_EEPROM. + +Using this search you can reduce the size of moveconfig patches. + + Available options -----------------
@@ -191,6 +254,7 @@ To see the complete list of supported options, run
"""
+import collections import copy import difflib import filecmp @@ -1395,6 +1459,148 @@ def move_config(configs, options, db_queue): slots.show_failed_boards() slots.show_suspicious_boards()
+def imply_config(config_list, find_superset=False): + """Find CONFIG options which imply those in the list + + Some CONFIG options can be implied by others and this can help to reduce + the size of the defconfig files. For example, CONFIG_X86 implies + CONFIG_CMD_IRQ, so we can put 'imply CMD_IRQ' under 'config X86' and + all x86 boards will have that option, avoiding adding CONFIG_CMD_IRQ to + each of the x86 defconfig files. + + This function uses the moveconfig database to find such options. It + displays a list of things that could possibly imply those in the list. + The algorithm ignores any that start with CONFIG_TARGET since these + typically refer to only a few defconfigs (often one). It also does not + display a config with less than 5 defconfigs. + + The algorithm works using sets. For each target config in config_list: + - Get the set 'defconfigs' which use that target config + - For each config (from a list of all configs): + - Get the set 'imply_defconfig' of defconfigs which use that config + - + - If imply_defconfigs contains anything not in defconfigs then + this config does not imply the target config + + Params: + config_list: List of CONFIG options to check (each a string) + find_superset: True to look for configs which are a superset of those + already found. So for example if CONFIG_EXYNOS5 implies an option, + but CONFIG_EXYNOS covers a larger set of defconfigs and also + implies that option, this will drop the former in favour of the + latter. In practice this option has not proved very used. + + Note the terminoloy: + config - a CONFIG_XXX options (a string, e.g. 'CONFIG_CMD_EEPROM') + defconfig - a defconfig file (a string, e.g. 'configs/snow_defconfig') + """ + # key is defconfig name, value is dict of (CONFIG_xxx, value) + config_db = {} + + # Holds a dict containing the set of defconfigs that contain each config + # key is config, value is set of defconfigs using that config + defconfig_db = collections.defaultdict(set) + + # Set of all config options we have seen + all_configs = set() + + # Set of all defconfigs we have seen + all_defconfigs = set() + + # Read in the database + configs = {} + with open(CONFIG_DATABASE) as fd: + for line in fd.readlines(): + line = line.rstrip() + if not line: # Separator between defconfigs + config_db[defconfig] = configs + all_defconfigs.add(defconfig) + configs = {} + elif line[0] == ' ': # CONFIG line + config, value = line.strip().split('=', 1) + configs[config] = value + defconfig_db[config].add(defconfig) + all_configs.add(config) + else: # New defconfig + defconfig = line + + # Work through each target config option in tern, independently + for config in config_list: + defconfigs = defconfig_db.get(config) + if not defconfigs: + print '%s not found in any defconfig' % config + continue + + # Get the set of defconfigs without this one (since a config cannot + # imply itself) + non_defconfigs = all_defconfigs - defconfigs + num_defconfigs = len(defconfigs) + print '%s found in %d/%d defconfigs' % (config, num_defconfigs, + len(all_configs)) + + # This will hold the results: key=config, value=defconfigs containing it + imply_configs = {} + rest_configs = all_configs - set([config]) + + # Look at every possible config, except the target one + for imply_config in rest_configs: + if 'CONFIG_TARGET' in imply_config: + continue + + # Find set of defconfigs that have this config + imply_defconfig = defconfig_db[imply_config] + + # Get the intersection of this with defconfigs containing the + # target config + common_defconfigs = imply_defconfig & defconfigs + + # Get the set of defconfigs containing this config which DO NOT + # also contain the taret config. If this set is non-empty it means + # that this config affects other defconfigs as well as (possibly) + # the ones affected by the target config. This means it implies + # things we don't want to imply. + not_common_defconfigs = imply_defconfig & non_defconfigs + if not_common_defconfigs: + continue + + # If there are common defconfigs, imply_config may be useful + if common_defconfigs: + skip = False + if find_superset: + for prev in imply_configs.keys(): + prev_count = len(imply_configs[prev]) + count = len(common_defconfigs) + if (prev_count > count and + (imply_configs[prev] & common_defconfigs == + common_defconfigs)): + # skip imply_config because prev is a superset + skip = True + break + elif count > prev_count: + # delete prev because imply_config is a superset + del imply_configs[prev] + if not skip: + imply_configs[imply_config] = common_defconfigs + + # Now we have a dict imply_configs of configs which imply each config + # The value of each dict item is the set of defconfigs containing that + # config. Rank them so that we print the configs that imply the largest + # number of defconfigs first. + ranked_configs = sorted(imply_configs, + key=lambda k: len(imply_configs[k]), reverse=True) + for config in ranked_configs: + num_common = len(imply_configs[config]) + + # Don't bother if there are less than 5 defconfigs affected. + if num_common < 5: + continue + missing = defconfigs - imply_configs[config] + missing_str = ', '.join(missing) if missing else 'all' + missing_str = '' + print ' %d : %-30s%s' % (num_common, config.ljust(30), + missing_str) + + def main(): try: cpu_count = multiprocessing.cpu_count() @@ -1413,6 +1619,8 @@ def main(): help='a file containing a list of defconfigs to move, ' "one per line (for example 'snow_defconfig') " "or '-' to read from stdin") + parser.add_option('-i', '--imply', action='store_true', default=False, + help='find options which imply others') parser.add_option('-n', '--dry-run', action='store_true', default=False, help='perform a trial run (show log with no changes)') parser.add_option('-e', '--exit-on-error', action='store_true', @@ -1437,7 +1645,8 @@ def main():
(options, configs) = parser.parse_args()
- if len(configs) == 0 and not any((options.force_sync, options.build_db)): + if len(configs) == 0 and not any((options.force_sync, options.build_db, + options.imply)): parser.print_usage() sys.exit(1)
@@ -1447,6 +1656,10 @@ def main():
check_top_directory()
+ if options.imply: + imply_config(configs) + return + config_db = {} db_queue = Queue.Queue() t = DatabaseThread(config_db, db_queue)