Re: [PATCH v3 1/2] cmd: Add support for optee commands

On 12/16/24 10:29, Venkatesh Yadav Abbarapu wrote:

Add the basic 'hello world ta' command which increment of the value passed. This provides easy test for establishing a session with OP-TEE TA and verify.

It includes following "hello world ta" subcommands: optee hello; default value '0' is passed and gets incremented. optee hello <value>; value to increment via OP-TEE HELLO WORLD TA.

To enable the OP-TEE side HELLO WORLD example please refer https://optee.readthedocs.io/en/latest/building/gits/optee_examples/optee_ex...

Signed-off-by: Venkatesh Yadav Abbarapu venkatesh.abbarapu@amd.com

cmd/Kconfig | 6 ++++ cmd/Makefile | 1 + cmd/optee.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 100 insertions(+) create mode 100644 cmd/optee.c

diff --git a/cmd/Kconfig b/cmd/Kconfig index 1d7ddb4ed36..4b33468891e 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1446,6 +1446,12 @@ config CMD_OPTEE_RPMB in the Replay Protection Memory Block partition in eMMC by using Persistent Objects in OPTEE

+config CMD_OPTEE

• bool "Enable OP-TEE commands"
• depends on OPTEE
• help

• OP-TEE commands support.
  

• config CMD_MTD bool "mtd" depends on MTD

diff --git a/cmd/Makefile b/cmd/Makefile index d1f369deec0..533d0f6a1be 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -118,6 +118,7 @@ obj-$(CONFIG_CMD_PAUSE) += pause.o obj-$(CONFIG_CMD_SLEEP) += sleep.o obj-$(CONFIG_CMD_MMC) += mmc.o obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o +obj-$(CONFIG_CMD_OPTEE) += optee.o obj-$(CONFIG_CMD_MP) += mp.o obj-$(CONFIG_CMD_MTD) += mtd.o obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o diff --git a/cmd/optee.c b/cmd/optee.c new file mode 100644 index 00000000000..618a2f8490e --- /dev/null +++ b/cmd/optee.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • (C) Copyright 2024, Advanced Micro Devices, Inc.
• */

+#include <command.h> +#include <errno.h> +#include <tee.h> +#include <vsprintf.h>

+static struct udevice *tee; +static u32 session;

Can you please also get rid of these? Just pass them via parameters.

+#define TA_HELLO_WORLD_CMD_INC_VALUE 0 +/* This needs to match the UUID of the Hello World TA. */ +#define TA_HELLO_WORLD_UUID \

• { 0x8aaaf200, 0x2450, 0x11e4, \
• { 0xab, 0xe2, 0x00, 0x02, 0xa5, 0xd5, 0xc5, 0x1b} }

+static int hello_world_ta_open_session(void) +{

• const struct tee_optee_ta_uuid uuid = TA_HELLO_WORLD_UUID;
• struct tee_open_session_arg arg;
• int rc;
• tee = tee_find_device(tee, NULL, NULL, NULL);
• if (!tee)

• return -ENODEV;
  

• memset(&arg, 0, sizeof(arg));
• tee_optee_ta_uuid_to_octets(arg.uuid, &uuid);
• rc = tee_open_session(tee, &arg, 0, NULL);
• if (rc != 0)

• session = arg.session;
  

• return rc;

+}

Maybe I would even consider to move content of this function directly to code below. It will make example more compact and you don't need to use that static variables.

M

+static int hello_world_ta(unsigned int value) +{

• struct tee_param param[2];
• struct tee_invoke_arg arg;
• int status = -EACCES;
• printf("The Hello World TA is going to be called\n");
• status = hello_world_ta_open_session();
• if (status) {

• printf("hello_world_ta_open_session failed(%d)", status);
  

• return status;
  

• }
• arg.func = TA_HELLO_WORLD_CMD_INC_VALUE;
• arg.session = session;
• param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INOUT;
• param[0].u.value.a = value;
• printf("TA value: 0x%x\n", (int)param[0].u.value.a);

Don't you want to remove this line completely.

• tee_invoke_func(tee, &arg, 1, param);
• printf("TA value: 0x%x\n", (int)param[0].u.value.a);

And here just print directly origin "value" and then new one via one print.

• return tee_close_session(tee, session);

+}

+static int do_optee_hello_world_ta(struct cmd_tbl *cmdtp, int flag, int argc,

• 		   char * const argv[])
  

+{

• int ret;
• int value = 0;

swap these two or put them on the same line.

• if (strcmp(argv[1], NULL))

• value = hextoul(argv[1], NULL);
  

• ret = hello_world_ta(value);
• if (ret)

• return CMD_RET_FAILURE;
  

• return CMD_RET_SUCCESS;

+}

+U_BOOT_LONGHELP(optee,

• "- commands can be verified on OP-TEE\n\n"
  

• "optee hello\n"
  

• "optee hello <value>\n"
  

• "\n"
  

• "With:\n"
  

• "\t<value>: integer value\n"
  

• );
  

+U_BOOT_CMD_WITH_SUBCMDS(optee, "OP-TEE commands", optee_help_text,

• 	U_BOOT_SUBCMD_MKENT(hello, 2, 1, do_optee_hello_world_ta));
  

M