Change some of the PEX configuration output lines from always output to only ouput upon specific debug enabling.
This changes the SPL output from:
U-Boot SPL 2016.01-rc2-00037-g9353a7f (Dec 10 2015 - 10:27:42) High speed PHY - Version: 2.1.5 (COM-PHY-V20) Update Device ID PEX0782611ab Update Device ID PEX1782611ab Update Device ID PEX2782611ab Update Device ID PEX3782611ab Update Device ID PEX8782611ab Update PEX Device ID 0x78260 High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully
to:
U-Boot SPL 2016.01-rc2-00037-g9353a7f-dirty (Dec 10 2015 - 10:32:04) High speed PHY - Version: 2.1.5 (COM-PHY-V20) High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.4 DDR3 Training Sequence - Ended Successfully
Resulting in a little faster bootup time.
Signed-off-by: Stefan Roese sr@denx.de Cc: Luka Perkov luka.perkov@sartura.hr --- arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c index 9762971..bfa7f13 100644 --- a/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/axp/high_speed_env_lib.c @@ -1376,19 +1376,19 @@ int serdes_phy_config(void) pex_if, PEX_DEVICE_AND_VENDOR_ID)); devId &= 0xFFFF; devId |= ((ctrl_mode << 16) & 0xffff0000); - DEBUG_INIT_S("Update Device ID PEX"); - DEBUG_INIT_D(pex_if, 1); - DEBUG_INIT_D(devId, 8); - DEBUG_INIT_S("\n"); + DEBUG_INIT_FULL_S("Update Device ID PEX"); + DEBUG_INIT_FULL_D(pex_if, 1); + DEBUG_INIT_FULL_D(devId, 8); + DEBUG_INIT_FULL_S("\n"); reg_write(PEX_CFG_DIRECT_ACCESS (pex_if, PEX_DEVICE_AND_VENDOR_ID), devId); if ((pex_if < 8) && (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)) pex_if += 3; } - DEBUG_INIT_S("Update PEX Device ID 0x"); - DEBUG_INIT_D(ctrl_mode, 4); - DEBUG_INIT_S("0\n"); + DEBUG_INIT_FULL_S("Update PEX Device ID 0x"); + DEBUG_INIT_FULL_D(ctrl_mode, 4); + DEBUG_INIT_FULL_S("0\n"); } tmp = reg_read(PEX_DBG_STATUS_REG(0)); DEBUG_RD_REG(PEX_DBG_STATUS_REG(0), tmp);