Hi Breno,
On Fri, Apr 7, 2017 at 4:22 PM, Breno Lima breno.lima@nxp.com wrote:
Explain how to flash the eMMC and how to boot from it.
Signed-off-by: Breno Lima breno.lima@nxp.com
board/freescale/mx6sabresd/README | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README index 5814b9d..875d4b2 100644 --- a/board/freescale/mx6sabresd/README +++ b/board/freescale/mx6sabresd/README @@ -27,6 +27,28 @@ This will generate the image called u-boot.imx.
$ sudo dd if=u-boot.imx of=/dev/sdb bs=1K seek=1 && sync
+- Flash the u-boot.imx binary into the eMMC:
I would put a extra section for booting from eMMC.
Something like:
Change:
1. Booting via Normal U-Boot
to
1. Booting from SD card via normal U-Boot
and then:
2. Booting from eMMC via normal U-Boot
The rest looks good.