From: T Karthik Reddy t.karthik.reddy@xilinx.com
To add usb-3.0 support to peripheral device add BOS & SS capability descriptors to gadget composite framework.
Signed-off-by: T Karthik Reddy t.karthik.reddy@xilinx.com Signed-off-by: Siva Durga Prasad Paladugu siva.durga.paladugu@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/usb/gadget/composite.c | 61 ++++++++++++++++++++++++++++++---- include/linux/usb/ch9.h | 3 ++ include/linux/usb/gadget.h | 9 +++++ 3 files changed, 67 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index c7e762374752..618a7d5016ee 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -688,6 +688,57 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) req->status, req->actual, req->length); }
+static int bos_desc(struct usb_composite_dev *cdev) +{ + struct usb_ext_cap_descriptor *usb_ext; + struct usb_bos_descriptor *bos = cdev->req->buf; + + bos->bLength = USB_DT_BOS_SIZE; + bos->bDescriptorType = USB_DT_BOS; + + bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE); + bos->bNumDeviceCaps = 0; + + /* + * A SuperSpeed device shall include the USB2.0 extension descriptor + * and shall support LPM when operating in USB2.0 HS mode. + */ + usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE); + usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; + usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; + usb_ext->bmAttributes = + cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT); + + /* + * The Superspeed USB Capability descriptor shall be implemented + * by all SuperSpeed devices. + */ + if (gadget_is_superspeed(cdev->gadget)) { + struct usb_ss_cap_descriptor *ss_cap; + + ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); + bos->bNumDeviceCaps++; + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE); + ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE; + ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; + ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE; + ss_cap->bmAttributes = 0; /* LTM is not supported yet */ + ss_cap->wSpeedSupported = + cpu_to_le16(USB_LOW_SPEED_OPERATION | + USB_FULL_SPEED_OPERATION | + USB_HIGH_SPEED_OPERATION | + USB_5GBPS_OPERATION); + ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION; + ss_cap->bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT; + ss_cap->bU2DevExitLat = + cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT); + } + return le16_to_cpu(bos->wTotalLength); +} + /* * The setup() callback implements all the ep0 functionality that's * not handled lower down, in hardware or the hardware driver(like @@ -776,12 +827,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(w_length, (u16) value); break; case USB_DT_BOS: - /* - * The USB compliance test (USB 2.0 Command Verifier) - * issues this request. We should not run into the - * default path here. But return for now until - * the superspeed support is added. - */ + if (gadget_is_superspeed(cdev->gadget)) + value = bos_desc(cdev); + if (value >= 0) + value = min(w_length, (u16)value); break; default: goto unknown; diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 264c9712a33a..989a5fcbd966 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -878,6 +878,9 @@ struct usb_ss_cap_descriptor { /* Link Power Management */ __le16 bU2DevExitLat; } __attribute__((packed));
+#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ +#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x01F4 /* Less then 500 microsec */ + #define USB_DT_USB_SS_CAP_SIZE 10
/* diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 497798a32a87..58bfaddd036a 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -566,6 +566,15 @@ static inline int gadget_is_otg(struct usb_gadget *g) #endif }
+/** + * gadget_is_superspeed() - return true if the hardware handles superspeed + * @g: controller that might support superspeed + */ +static inline int gadget_is_superspeed(struct usb_gadget *g) +{ + return g->max_speed >= USB_SPEED_SUPER; +} + /** * usb_gadget_frame_number - returns the current frame number * @gadget: controller that reports the frame number