Hi Stefano,
On Wed, Oct 5, 2016 at 2:17 AM, Jagan Teki jteki@openedev.com wrote:
From: Jagan Teki jagan@amarulasolutions.com
This series supports Engicam i.CoreM6 QDL modules on top of u-boot-imx/master and test on the respective starter kits as well.
Tested both MMC and NAND boot.
Changes for v6: - Rebase to u-boot-imx/master - Move few SPL configs to defconfigs
Changes for v5: - Add NAND support
Changes for v4: - Add 'net: Kconfig: Add FEC_MXC entry' patch - Updated ENV configs along with comments - Restructured configs for more readability - Add CONFIG_ENV_OVERWRITE - Rename icorem6qdl_defconfig with icorem6qdl_mmc_defconfig
Changes for v3: - Remove "v2 01/17 imx: iomux-v3: Fix build error with snvs base" patch - Remove 'default n' on Kconfig DEFAULT_FDT_FILE patch - Add minimal devicetree support for Engicam i.CoreM6 QDL - Add is_mx6dl() - Add is_mx6solo() - Use is_mx6dq() - Add last commit sha1 and header in pull devicetree files from Linux
Changes for v2: - Make static to local iomux structure in board file - Corrected rowaddr in mx6_ddr3_cfg - Used imx_ddr_size - Add FEC support and tested the same - Add DM_GPIO, DM_MMC support - Add pinctrl support - Add devicetree support
Jagan Teki (21): serial: Kconfig: Add MXC_UART entry thermal: Kconfig: Add IMX_THERMAL entry Kconfig: Add DEFAULT_FDT_FILE entry arm: imx: Add Engicam i.CoreM6 QDL Starter Kit initial support net: Kconfig: Add FEC_MXC entry imx6: icorem6: Add ENET support imx: s/docs/README.imximage/doc/README.imximage/g arm: dts: Add devicetree for i.MX6DL arm: dts: Add devicetree for i.MX6DQL arm: dts: imx6dl: Add pinctrl defines dt-bindings: clock: imx6qdl: Add clock defines arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/Solo imx6q: icorem6: Enable pinctrl driver engicam: icorem6: Add DM_GPIO, DM_MMC support arm: dts: Add devicetree for i.MX6Q arm: dts: imx6q: Add pinctrl defines arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/Dual mtd: nand: Kconfig: Add NAND_MXS entry imx6: icorem6: Add NAND support imx6: icorem6: Enable MTD device support imx6: icorem6: Add default mtd nand partition table
All look fine on u-boot-imx/master, please apply
thanks!