None of the AMCC boards uses an embedded environment, so there is no need to run "saveenv" after updating U-Boot. Drop the redundant commands from the default environment.
Signed-off-by: Wolfgang Denk wd@denx.de --- include/configs/amcc-common.h | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 13a941e..23a859f 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -278,15 +278,13 @@ "load=tftp 200000 ${u-boot}\0" \ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ "era " xstr(CONFIG_SYS_MONITOR_BASE) " FFFFFFFF;" \ - "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize};" \ - "setenv filesize;saveenv\0" \ + "cp.b ${fileaddr} " xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}" \ "upd=run load update\0" \
#define CONFIG_AMCC_DEF_ENV_NAND_UPD \ "u-boot-nand=" xstr(CONFIG_HOSTNAME) "/u-boot-nand.bin\0" \ "nload=tftp 200000 ${u-boot-nand}\0" \ - "nupdate=nand erase 0 100000;nand write 200000 0 100000;" \ - "setenv filesize;saveenv\0" \ + "nupdate=nand erase 0 100000;nand write 200000 0 100000" \ "nupd=run nload nupdate\0"
#endif /* __AMCC_COMMON_H */