14 Mar
2014
14 Mar
'14
9:45 a.m.
Dear JYOTI DUBEY,
In message CAE0zQkuaek52RPtRoMM=LGVHA5OCsaMywX+FBag8sedC3YNJew@mail.gmail.com you wrote:
fatload mmc 0:1 12000000 u-boot.imx
reading u-boot.imx 343040 bytes read in 54 ms (6.1 MiB/s)
The size is here printed as a decimal number, but ...
sf write 0x12000000 0x0 343040
ERROR: attempting write past flash size (0x200000)
...sf expexts hex input; so you actually passed 0x343040 which is about 10 times the correct value.
You can easily avoid this problem by using the automatially set variable "filesize" instead.
I have no clue as how to overcome this error.Can somebody help me with this error.
Try:
fatload mmc 0:1 12000000 u-boot.imx sf write 12000000 0 $filesize
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"We all agree on the necessity of compromise. We just can't agree on
when it's necessary to compromise."
- Larry Wall in 1991Nov13.194420.28091@netlabs.com