[U-Boot-Users] U-BOOT for MPC885 Eval board - i2c problem

Hi,

We are using MPC885ADS Eval. board ,we are porting U-Boot 1.1.1 on it and working fine,

we have following query :

We are connected an EEPROM (CHIP ADDRESS : 0X50) on I2C bus, when we trying to check with "iprobe" command its displaying a message like :

Valid chip addresses: 00 01 02 03 04 05 06 07 ............ 80

Its talking a lots of time and not working.

Has anyone faced same problem?

thanks and regards, Sachin mehta