On 2020/2/18 17:05, Heiko Schocher <hs@denx.demailto:hs@denx.de> wrote:
-----Original Message-----
From: Heiko Schocher hs@denx.de
Sent: 2020年2月18日 17:05
To: U-Boot Mailing List u-boot@lists.denx.de
Cc: Heiko Schocher hs@denx.de; Holger Brunck
holger.brunck@ch.abb.com; Mario Six mario.six@gdsys.cc; Qiang Zhao
qiang.zhao@nxp.com; Wolfgang Denk wd@denx.de
Subject: [RFC PATCH] powerpc, qe: add DTS support for parallel I/O ports
add DM support for parallel I/O ports on QUICC Engine Block
Signed-off-by: Heiko Schocher <hs@denx.demailto:hs@denx.de>
arch/powerpc/cpu/mpc83xx/cpu_init.c | 8 ++
arch/powerpc/cpu/mpc83xx/qe_io.c | 193
+++++++++++++++++++++++++++-
include/fsl_qe.h | 3 +
3 files changed, 201 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c
b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index af8facad53..cfcc16607c 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
How about mpc85xx?
@@ -11,6 +11,9 @@
#ifdef CONFIG_USB_EHCI_FSL
#include <usb/ehci-ci.h>
#endif
+#ifdef CONFIG_QE
+#include <fsl_qe.h>
+#endif
If include this headfile, the function declaration for qe_init and qe_reset in this file should be removed as below:
extern void qe_init(uint qe_base);
extern void qe_reset(void);
#include "lblaw/lblaw.h"
#include "elbc/elbc.h"
@@ -27,6 +30,7 @@ extern void qe_config_iopin(u8 port, u8 pin, int dir,
extern void qe_init(uint qe_base); extern void qe_reset(void);
+/**
- par_io_of_config_node config
- @dev: pointer to pinctrl device
- @pio: ofnode of pinconfig property
- */
+static int par_io_of_config_node(struct udevice *dev, ofnode pio) {
- struct qe_io_platdata *plat = dev->platdata;
- volatile qepio83xx_t *par_io = plat->base;
- const unsigned int *pio_map;
- int pio_map_len;
- pio_map = ofnode_get_property(pio, "pio-map", &pio_map_len);
- if (pio_map == NULL)
return -ENOENT;
- pio_map_len /= sizeof(unsigned int);
- if ((pio_map_len % 6) != 0) {
printk(KERN_ERR "pio-map format wrong!\n");
return -EINVAL;
- }
- while (pio_map_len > 0) {
/*
* column pio_map[5] from linux (has_irq) not
* supported in u-boot yet.
*/
remove or keep pio_map[5] in uboot dts, which is better?
+const struct pinctrl_ops par_io_pinctrl_ops = {
- .set_state = par_io_pinctrl_set_state, };
+static const struct udevice_id par_io_pinctrl_match[] = {
- { .compatible = "fsl,mpc8360-par_io"},
Why is fsl,mpc8360-par_io, maybe fsl,qe-par-io are more better.
- { /* sentinel */ }
+};
+U_BOOT_DRIVER(par_io_pinctrl) = {
- .name = "par-io-pinctrl",
- .id = UCLASS_PINCTRL,
- .of_match = of_match_ptr(par_io_pinctrl_match),
- .probe = par_io_pinctrl_probe,
- .ofdata_to_platdata = qe_io_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct qe_io_platdata),
- .ops = &par_io_pinctrl_ops,
+#if CONFIG_IS_ENABLED(OF_CONTROL)
&& !CONFIG_IS_ENABLED(OF_PLATDATA)
- .flags = DM_FLAG_PRE_RELOC,
+#endif
+};
+#endif
diff --git a/include/fsl_qe.h b/include/fsl_qe.h index d4eba82436..cb5c91bdf1
100644
--- a/include/fsl_qe.h
+++ b/include/fsl_qe.h
@@ -295,4 +295,7 @@ int u_qe_firmware_resume(const struct qe_firmware
*firmware,
qe_map_t *qe_immrr);
#endif
+#if defined(CONFIG_PINCTRL)
+int par_io_of_config(struct udevice *dev); #endif
#endif /* __QE_H__ */
I don’t find this function is called anywhere.
--
2.24.1
Best Regards
Qiang Zhao