Hi Kever,
On Aug 23, 2016 20:48, "Kever Yang" kever.yang@rock-chips.com wrote:
To support fastboot, we need to enable the controller first. rk3399 is using dwc3 as usb device controller, this patch enable the configs for dwc3 gadget.
Signed-off-by: Kever Yang kever.yang@rock-chips.com Reviewed-by: Simon Glass sjg@chromium.org
Changes in v2:
- remove config for USB2PHY UTMI BITS
include/configs/rk3399_common.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/include/configs/rk3399_common.h
b/include/configs/rk3399_common.h
index 6875308..fcd1700 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -27,6 +27,26 @@
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
+/* usb device */ +#define CONFIG_USB_DWC3 +#define CONFIG_USB_DWC3_GADGET +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 0
+/* fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_USB_FUNCTION_FASTBOOT +#define CONFIG_FASTBOOT_FLASH +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 /* eMMC */ +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_FASTBOOT_BUF_SIZE 0x08000000
+#define CONFIG_USB_GADGET_DOWNLOAD +#define CONFIG_G_DNL_MANUFACTURER "Rockchip" +#define CONFIG_G_DNL_VENDOR_NUM 0x2207 +#define CONFIG_G_DNL_PRODUCT_NUM 0x330a
FYI - All of these new defines are now in Kconfig.... Thanks, Steve
/* MMC/SD IP block */ #define CONFIG_MMC
#define CONFIG_GENERIC_MMC
1.9.1
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot