I just wanted to say thanks for the great software. I had been using rrload on my omap1510 innovator board. Yesterday, I got u-boot 1.1.2 compiled, loading, running, and flashed on the board - and I'm very happy! It's nice to have a more full-featured bootloader for my development work. Networking worked, as did all serial, memory and flash operations that I tested.
I had to change one CFLAG in cpu/arm925t/config.mk: I changed -mshort-load-bytes to -malignment-traps, to support my gcc 3.4.3 compiler.
A patch similar to this was submitted previously and rejected, because it breaks older compilers. I'm only including it here for others who may care. (This is not a request for integration.)
----------- diff -u -u -r1.1 -r1.2 --- config.mk 3 Feb 2005 18:10:36 -0000 1.1 +++ config.mk 3 Feb 2005 23:38:00 -0000 1.2 @@ -22,6 +22,6 @@ #
PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ - -mshort-load-bytes -msoft-float + -malignment-traps -msoft-float
PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -------------
I notice that there's no doc/README.omap1510inn. I'd be willing to write one if no one else is already working on one (although I'm not an expert by any means.)
Thanks again for u-boot! -- Tim
============================= Tim Bird Architecture Group Chair, CE Linux Forum Senior Staff Engineer, Sony Electronics =============================