Re: [U-Boot] [PATCH 2/3] sunxi: promote CONFIG_CLK_FULL_SPEED to be selectable through Kconfig

On 27/03/15 13:57, Hans de Goede wrote:

Hi,

On 27-03-15 01:12, Iain Paton wrote:

...

in order to allow for this to be set differently per board, remove the define from the associated soc headers and allow the user to choose a value through a Kconfig setting

Signed-off-by: Iain Paton ipaton0@gmail.com

Thanks, but if we're going to do this, then can you please rename CLK_FULL_SPEED to SYS_CLK_FREQ, as that is already defined in

./Kconfig

Sure thing, I'd missed that there was already a suitable variable. Updated version on the way.

Rgds, Iain