This provides a unified configuration across all sunxi boards, regardless of CPU architecture.
Signed-off-by: Samuel Holland samuel@sholland.org ---
common/spl/Kconfig | 12 ++++++------ scripts/Makefile.spl | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 930028b5af..5ff75aad9f 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -110,7 +110,7 @@ config SPL_PAD_TO config SPL_HAS_BSS_LINKER_SECTION depends on SPL_FRAMEWORK bool "Use a specific address for the BSS via the linker script" - default y if ARCH_SUNXI || ARCH_MX6 || ARCH_OMAP2PLUS || MIPS || RISCV || ARCH_ZYNQMP + default y if ARCH_MX6 || ARCH_OMAP2PLUS || ARCH_ZYNQMP || BOARD_SUNXI || MIPS || RISCV
config SPL_BSS_START_ADDR hex "Link address for the BSS within the SPL binary" @@ -334,7 +334,7 @@ config SPL_SYS_MALLOC_SIMPLE config SPL_SHARES_INIT_SP_ADDR bool "SPL and U-Boot use the same initial stack pointer location" depends on (ARM || ARCH_JZ47XX || MICROBLAZE || RISCV) && SPL_FRAMEWORK - default n if ARCH_SUNXI || ARCH_MX6 || ARCH_MX7 + default n if BOARD_SUNXI || ARCH_MX6 || ARCH_MX7 default y help In many cases, we can use the same initial stack pointer address for @@ -452,7 +452,7 @@ config SPL_DISPLAY_PRINT
config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR bool "MMC raw mode: by sector" - default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER || \ + default y if BOARD_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER || \ ARCH_MX6 || ARCH_MX7 || \ ARCH_ROCKCHIP || ARCH_MVEBU || ARCH_SOCFPGA || \ ARCH_AT91 || ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || \ @@ -465,7 +465,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR hex "Address on the MMC to load U-Boot from" depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR - default 0x40 if ARCH_SUNXI + default 0x40 if BOARD_SUNXI default 0x75 if ARCH_DAVINCI default 0x8a if ARCH_MX6 || ARCH_MX7 default 0x100 if ARCH_UNIPHIER @@ -482,7 +482,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR config SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET hex "U-Boot main hardware partition image offset" depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR - default 0x10 if ARCH_SUNXI + default 0x10 if BOARD_SUNXI default 0x0 help On some platforms SPL location depends on hardware partition. The ROM @@ -1308,7 +1308,7 @@ endif # SPL_SPI_FLASH_SUPPORT
config SYS_SPI_U_BOOT_OFFS hex "address of u-boot payload in SPI flash" - default 0x8000 if ARCH_SUNXI + default 0x8000 if BOARD_SUNXI default 0x0 depends on SPL_SPI_LOAD || SPL_SPI_SUNXI help diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl index 15ac87286d..819050dd4d 100644 --- a/scripts/Makefile.spl +++ b/scripts/Makefile.spl @@ -264,7 +264,7 @@ endif
INPUTS-$(CONFIG_TARGET_SOCFPGA_SOC64) += $(obj)/u-boot-spl-dtb.hex
-ifdef CONFIG_ARCH_SUNXI +ifdef CONFIG_BOARD_SUNXI INPUTS-y += $(obj)/sunxi-spl.bin
ifdef CONFIG_NAND_SUNXI