From: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com
Note: gpio7_8 was never used for usb power regulator so we remove it here
Acked-by: Patrick Bruenn p.bruenn@beckhoff.com Signed-off-by: Steffen Dirkwinkel s.dirkwinkel@beckhoff.com ---
arch/arm/dts/imx53-cx9020.dts | 11 ++++++++++- board/beckhoff/mx53cx9020/mx53cx9020.c | 10 ---------- configs/mx53cx9020_defconfig | 6 ++++++ 3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts index 2b7f7288088..e08850999b1 100644 --- a/arch/arm/dts/imx53-cx9020.dts +++ b/arch/arm/dts/imx53-cx9020.dts @@ -36,7 +36,6 @@ MX53_PAD_GPIO_1__GPIO1_1 0x80000000 MX53_PAD_GPIO_4__GPIO1_4 0x80000000 MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 - MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 MX53_PAD_GPIO_16__GPIO7_11 0x80000000
MX53_PAD_EIM_OE__EMI_WEIM_OE 0x80000000 @@ -220,3 +219,13 @@ full-duplex; }; }; + +&usbh1 { + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; + status = "okay"; +}; diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c index 9450d925f6f..caffd5c9ee8 100644 --- a/board/beckhoff/mx53cx9020/mx53cx9020.c +++ b/board/beckhoff/mx53cx9020/mx53cx9020.c @@ -127,16 +127,6 @@ static void setup_gpio_leds(void) gpio_direction_output(GPIO_LED_PWR_G, 0); }
-#ifdef CONFIG_USB_EHCI_MX5 -int board_ehci_hcd_init(int port) -{ - /* request VBUS power enable pin, GPIO7_8 */ - gpio_direction_output(IMX_GPIO_NR(7, 8), 1); - return 0; -} -#endif - - static int power_init(void) { /* nothing to do on CX9020 */ diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 17c44bd070a..6087ed81ec9 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -19,7 +19,13 @@ CONFIG_CMD_PXE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y +CONFIG_CMD_USB=y CONFIG_CMD_FS_GENERIC=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_MX5=y +CONFIG_USB_STORAGE=y +CONFIG_DM_REGULATOR=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020" CONFIG_ENV_IS_IN_MMC=y