[U-Boot] [RFC] [UBOOT] [PATCH 1/4] USB: Port usb.h file from linux kernel to uBoot

Port the usb.h file that defines the USB structures for the client and the host.

In this patch files are created under the include/linux/usb directory.

usb-compat.h - Back port from include usb.h kernel commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b

linux-compat.h - Linux kernel compatibility definitions that do not exist in the uBoot. Moved the compatibility definitions from lin_gadget_compat.h to this file as well.

usb-mod-devicetable.h - Is a partial back port of mod_devicetable.h in the linux kernel for USB. kernel commit e5354107e14755991da82e0d2a4791db92908d9d

Already existing header files were modified to pick up the new header files.

Currently musb will not compile.

Signed-off-by: Dan Murphy dmurphy@ti.com --- drivers/usb/musb-new/musb_host.h | 1 + drivers/usb/musb-new/usb-compat.h | 30 - include/linux/usb/gadget.h | 184 +++- include/linux/usb/linux-compat.h | 234 ++++ include/linux/usb/usb-compat.h | 1957 +++++++++++++++++++++++++++++++ include/linux/usb/usb-mod-devicetable.h | 131 ++ include/usb.h | 119 +-- include/usb/lin_gadget_compat.h | 29 +- 8 files changed, 2474 insertions(+), 211 deletions(-) create mode 100644 include/linux/usb/linux-compat.h create mode 100644 include/linux/usb/usb-compat.h create mode 100644 include/linux/usb/usb-mod-devicetable.h

diff --git a/drivers/usb/musb-new/musb_host.h b/drivers/usb/musb-new/musb_host.h index ebebe0c..49cb094 100644 --- a/drivers/usb/musb-new/musb_host.h +++ b/drivers/usb/musb-new/musb_host.h @@ -35,6 +35,7 @@ #ifndef _MUSB_HOST_H #define _MUSB_HOST_H #ifdef __UBOOT__ +#include <linux/usb/usb-compat.h> #include "usb-compat.h" #endif

diff --git a/drivers/usb/musb-new/usb-compat.h b/drivers/usb/musb-new/usb-compat.h index 27f656f..bdb5f0e 100644 --- a/drivers/usb/musb-new/usb-compat.h +++ b/drivers/usb/musb-new/usb-compat.h @@ -6,13 +6,6 @@ struct usb_hcd { void *hcd_priv; }; - -struct usb_host_endpoint { - struct usb_endpoint_descriptor desc; - struct list_head urb_list; - void *hcpriv; -}; - /* * urb->transfer_flags: * @@ -20,29 +13,6 @@ struct usb_host_endpoint { */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ - -struct urb; - -typedef void (*usb_complete_t)(struct urb *); - -struct urb { - void *hcpriv; /* private data for host controller */ - struct list_head urb_list; /* list head for use by the urb's - * current owner */ - struct usb_device *dev; /* (in) pointer to associated device */ - struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */ - unsigned int pipe; /* (in) pipe information */ - int status; /* (return) non-ISO status */ - unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ - void *transfer_buffer; /* (in) associated data buffer */ - dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ - u32 transfer_buffer_length; /* (in) data buffer length */ - u32 actual_length; /* (return) actual transfer length */ - unsigned char *setup_packet; /* (in) setup packet (control only) */ - int start_frame; /* (modify) start frame (ISO) */ - usb_complete_t complete; /* (in) completion routine */ -}; - #define usb_hcd_link_urb_to_ep(hcd, urb) ({ \ int ret = 0; \ list_add_tail(&urb->urb_list, &urb->ep->urb_list); \ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 220d068..f987ff2 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -18,7 +18,11 @@ #ifndef __LINUX_USB_GADGET_H #define __LINUX_USB_GADGET_H

+#include <common.h> #include <linux/list.h> +#include <linux/usb/linux-compat.h> + +#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */

struct usb_ep;

@@ -83,6 +87,11 @@ struct usb_request { unsigned length; dma_addr_t dma;

+ struct scatterlist *sg; + unsigned num_sgs; + unsigned num_mapped_sgs; + + unsigned stream_id:16; unsigned no_interrupt:1; unsigned zero:1; unsigned short_not_ok:1; @@ -119,6 +128,8 @@ struct usb_ep_ops { int (*dequeue) (struct usb_ep *ep, struct usb_request *req);

int (*set_halt) (struct usb_ep *ep, int value); + int (*set_wedge) (struct usb_ep *ep); + int (*fifo_status) (struct usb_ep *ep); void (*fifo_flush) (struct usb_ep *ep); }; @@ -140,10 +151,17 @@ struct usb_ep_ops { */ struct usb_ep { void *driver_data; + const char *name; const struct usb_ep_ops *ops; struct list_head ep_list; unsigned maxpacket:16; + unsigned max_streams:16; + unsigned mult:2; + unsigned maxburst:5; + u8 address; + const struct usb_endpoint_descriptor *desc; + const struct usb_ss_ep_comp_descriptor *comp_desc; };

/*-------------------------------------------------------------------------*/ @@ -390,10 +408,120 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep) ep->ops->fifo_flush(ep); }

+/*-------------------------------------------------------------------------*/ + +struct usb_dcd_config_params { + __u8 bU1devExitLat; /* U1 Device exit Latency */ +#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ + __le16 bU2DevExitLat; /* U2 Device exit Latency */ +#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ +};

/*-------------------------------------------------------------------------*/

struct usb_gadget; +struct usb_gadget_driver; + +/*-------------------------------------------------------------------------*/ + +/* utility to simplify dealing with string descriptors */ + +/** + * struct usb_string - wraps a C string and its USB id + * @id:the (nonzero) ID for this string + * @s:the string, in UTF-8 encoding + * + * If you're using usb_gadget_get_string(), use this to wrap a string + * together with its ID. + */ +struct usb_string { + u8 id; + const char *s; +}; + +/** + * struct usb_gadget_strings - a set of USB strings in a given language + * @language:identifies the strings' language (0x0409 for en-us) + * @strings:array of strings with their ids + * + * If you're using usb_gadget_get_string(), use this to wrap all the + * strings for a given language. + */ +struct usb_gadget_strings { + u16 language; /* 0x0409 for en-us */ + struct usb_string *strings; +}; + +struct usb_gadget_string_container { + struct list_head list; + u8 *stash[0]; +}; + +/* put descriptor for string with that id into buf (buflen >= 256) */ +int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf); + +/*-------------------------------------------------------------------------*/ + +/* utility to simplify managing config descriptors */ + +/* write vector of descriptors into buffer */ +int usb_descriptor_fillbuf(void *, unsigned, + const struct usb_descriptor_header **); + +/* build config descriptor from single descriptor vector */ +int usb_gadget_config_buf(const struct usb_config_descriptor *config, + void *buf, unsigned buflen, const struct usb_descriptor_header **desc); + +/* copy a NULL-terminated vector of descriptors */ +struct usb_descriptor_header **usb_copy_descriptors( + struct usb_descriptor_header **); + +/** + * usb_free_descriptors - free descriptors returned by usb_copy_descriptors() + * @v: vector of descriptors + */ +static inline void usb_free_descriptors(struct usb_descriptor_header **v) +{ + kfree(v); +} + +struct usb_function; +int usb_assign_descriptors(struct usb_function *f, + struct usb_descriptor_header **fs, + struct usb_descriptor_header **hs, + struct usb_descriptor_header **ss); +void usb_free_all_descriptors(struct usb_function *f); + +/*-------------------------------------------------------------------------*/ + +/* utility to simplify map/unmap of usb_requests to/from DMA */ + +extern int usb_gadget_map_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in); + +extern void usb_gadget_unmap_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in); + +/*-------------------------------------------------------------------------*/ + +/* utility to set gadget state properly */ + +extern void usb_gadget_set_state(struct usb_gadget *gadget, + enum usb_device_state state); + +/*-------------------------------------------------------------------------*/ + +/* utility wrapping a simple endpoint selection policy */ + +extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, + struct usb_endpoint_descriptor *); + + +extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *, + struct usb_endpoint_descriptor *, + struct usb_ss_ep_comp_descriptor *); + +extern void usb_ep_autoconfig_reset(struct usb_gadget *);

/* the rest of the api to the controller hardware: device operations, * which don't involve endpoints (or i/o). @@ -407,11 +535,11 @@ struct usb_gadget_ops { int (*pullup) (struct usb_gadget *, int is_on); int (*ioctl)(struct usb_gadget *, unsigned code, unsigned long param); -}; - -struct device { - void *driver_data; /* data private to the driver */ - void *device_data; /* data private to the device */ + void (*get_config_params)(struct usb_dcd_config_params *); + int (*udc_start)(struct usb_gadget *, + struct usb_gadget_driver *); + int (*udc_stop)(struct usb_gadget *, + struct usb_gadget_driver *); };

/** @@ -462,6 +590,9 @@ struct usb_gadget { struct usb_ep *ep0; struct list_head ep_list; /* of usb_ep */ enum usb_device_speed speed; + enum usb_device_speed max_speed; + enum usb_device_state state; + unsigned sg_supported:1; unsigned is_dualspeed:1; unsigned is_otg:1; unsigned is_a_peripheral:1; @@ -470,6 +601,9 @@ struct usb_gadget { unsigned a_alt_hnp_support:1; const char *name; struct device dev; + unsigned out_epnum; + unsigned in_epnum; + };

static inline void set_gadget_data(struct usb_gadget *gadget, void *data) @@ -756,16 +890,22 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) * power is maintained. */ struct usb_gadget_driver { - enum usb_device_speed speed; - int (*bind)(struct usb_gadget *); + char *function; + enum usb_device_speed max_speed; + int (*bind)(struct usb_gadget *gadget, + struct usb_gadget_driver *driver); void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); void (*disconnect)(struct usb_gadget *); void (*suspend)(struct usb_gadget *); void (*resume)(struct usb_gadget *); -};

+ /* FIXME support safe rmmod */ + struct device_driver driver; + enum usb_device_speed speed; + +};

/*-------------------------------------------------------------------------*/

@@ -806,34 +946,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);

/*-------------------------------------------------------------------------*/

-/* utility to simplify dealing with string descriptors */ - -/** - * struct usb_string - wraps a C string and its USB id - * @id:the (nonzero) ID for this string - * @s:the string, in UTF-8 encoding - * - * If you're using usb_gadget_get_string(), use this to wrap a string - * together with its ID. - */ -struct usb_string { - u8 id; - const char *s; -}; - -/** - * struct usb_gadget_strings - a set of USB strings in a given language - * @language:identifies the strings' language (0x0409 for en-us) - * @strings:array of strings with their ids - * - * If you're using usb_gadget_get_string(), use this to wrap all the - * strings for a given language. - */ -struct usb_gadget_strings { - u16 language; /* 0x0409 for en-us */ - struct usb_string *strings; -}; - /* put descriptor for string with that id into buf (buflen >= 256) */ int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);

diff --git a/include/linux/usb/linux-compat.h b/include/linux/usb/linux-compat.h new file mode 100644 index 0000000..123cc2e --- /dev/null +++ b/include/linux/usb/linux-compat.h @@ -0,0 +1,234 @@ +/* + * linux_compat.h -- linux compatibility header file + * + * Copyright (C) 2013 + * Texas Instruments Incorporated. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LINUX_COMPAT_H__ +#define __LINUX_COMPAT_H__ + +#include <malloc.h> +#include <linux/list.h> +#include <linux/compat.h> +#include <asm-generic/errno.h> + +#define __init +#define __devinit +#define __devinitdata +#define __devinitconst +#define __iomem + +struct unused {}; +typedef struct unused unused_t; + +typedef int irqreturn_t; +typedef unused_t spinlock_t; + +struct work_struct {}; + +struct timer_list {}; +struct notifier_block {}; + +typedef unsigned long dmaaddr_t; +#define BUS_ID_SIZE 20 + +struct device { + struct device *parent; + struct class *class; + char bus_id[BUS_ID_SIZE]; /* position on parent bus */ + dev_t devt; /* dev_t, creates the sysfs "dev" */ + void (*release)(struct device *dev); + void *driver_data; /* data private to the driver */ + void *device_data; /* data private to the device */ +}; + +/** + * struct device_driver - The basic device driver structure + * @name: Name of the device driver. + * @bus: The bus which the device of this driver belongs to. + * @suppress_bind_attrs: Disables bind/unbind via sysfs. + * + * The device driver-model tracks all of the drivers known to the system. + * The main reason for this tracking is to enable the driver core to match + * up drivers with new devices. Once drivers are known objects within the + * system, however, a number of other things become possible. Device drivers + * can export information and configuration variables that are independent + * of any specific device. + */ +struct device_driver { + const char *name; + struct bus_type *bus; + + bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ + +}; + +/* + * Loop over each sg element, following the pointer to a new list if necessary + */ +#define for_each_sg(sglist, sg, nr, __i) \ + for (__i = 0, sg = (sglist); __i < (nr); __i++, sg = sg_next(sg)) + +/* Errors */ +#define EOPNOTSUPP 95 + +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + +#define setup_timer(timer, func, data) do {} while (0) +#define del_timer_sync(timer) do {} while (0) +#define schedule_work(work) do {} while (0) +#define INIT_WORK(work, fun) do {} while (0) + +#define cpu_relax() do {} while (0) + +#define dev_dbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_vdbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_info(dev, fmt, args...) \ + printf(fmt, ##args) +#define dev_err(dev, fmt, args...) \ + printf(fmt, ##args) +#define printk printf + +#define WARN(condition, fmt, args...) ({ \ + int ret_warn = !!condition; \ + if (ret_warn) \ + printf(fmt, ##args); \ + ret_warn; }) + +#define KERN_DEBUG +#define KERN_NOTICE +#define KERN_WARNING +#define KERN_ERR +#define WARN_ON_ONCE WARN_ON +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) + +#define kfree(ptr) free(ptr) + +/* common */ +#define spin_lock_init(...) +#define spin_lock(...) +#define spin_lock_irqsave(lock, flags) do { debug("%lu\n", flags); } while (0) +#define spin_unlock(...) +#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0) +#define disable_irq(...) +#define enable_irq(...) + +#define mutex_init(...) +#define mutex_lock(...) +#define mutex_unlock(...) + +#define GFP_KERNEL 0 + +#define IRQ_HANDLED 1 + +#define EOPNOTSUPP 95 +#define ENOTSUPP 524 /* Operation is not supported */ + +#define BITS_PER_BYTE 8 +#define BITS_TO_LONGS(nr) \ + DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) +#define DECLARE_BITMAP(name, bits) \ + unsigned long name[BITS_TO_LONGS(bits)] + +#define small_const_nbits(nbits) \ + (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG) + +/* TODO: Figure out these structs */ +static inline int pm_runtime_get_sync(struct device *dev) { return 0; } +#define pm_runtime_put(dev) do {} while (0) +#define pm_runtime_put_sync(dev) do {} while (0) +#define pm_runtime_use_autosuspend(dev) do {} while (0) +#define pm_runtime_set_autosuspend_delay(dev, delay) do {} while (0) +#define pm_runtime_enable(dev) do {} while (0) +#define pm_runtime_disable(dev) do {} while (0) + +#define MODULE_DESCRIPTION(desc) +#define MODULE_AUTHOR(author) +#define MODULE_LICENSE(license) +#define MODULE_ALIAS(alias) +#define module_param(name, type, perm) +#define MODULE_PARM_DESC(name, desc) +#define EXPORT_SYMBOL_GPL(name) +#define MODULE_DEVICE_TABLE(type, name) + +#define writesl(a, d, s) __raw_writesl((unsigned long)a, d, s) +#define readsl(a, d, s) __raw_readsl((unsigned long)a, d, s) +#define writesw(a, d, s) __raw_writesw((unsigned long)a, d, s) +#define readsw(a, d, s) __raw_readsw((unsigned long)a, d, s) +#define writesb(a, d, s) __raw_writesb((unsigned long)a, d, s) +#define readsb(a, d, s) __raw_readsb((unsigned long)a, d, s) + +/* IRQ */ +#define IRQ_NONE 0 +#define IRQ_WAKE_THREAD 0 +#define IRQF_SHARED 0 +#define IRQF_ONESHOT 0 +#define GFP_KERNEL 0 + +#define dev_set_drvdata(dev, data) do {} while (0) + +#define disable_irq_wake(irq) do {} while (0) +#define enable_irq_wake(irq) -EINVAL +#define free_irq(irq, data) do {} while (0) +#define request_irq(nr, f, flags, nm, data) 0 + +#define device_init_wakeup(dev, a) do {} while (0) + +#define platform_data device_data + +#ifndef wmb +#define wmb() asm volatile ("" : : : "memory") +#endif + +#define msleep(a) udelay(a * 1000) + +/* + * Map U-Boot config options to Linux ones + */ +#ifdef CONFIG_OMAP34XX +#define CONFIG_SOC_OMAP3430 +#endif + +/* TODO: Figure out these structs +static inline int IS_ENABLED(option) { return option; };*/ +#define lower_32_bits(n) ((u32)(n)) +#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0) +#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) + + +static inline void *dma_alloc_coherent(void *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) +{ + void *p; + + p = malloc(size); + *dma_handle = (unsigned long)p; + return p; +} + +static inline void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t bus) +{ + free(vaddr); +} + +#endif /* __LINUX_COMPAT_H__ */ diff --git a/include/linux/usb/usb-compat.h b/include/linux/usb/usb-compat.h new file mode 100644 index 0000000..ae040d5 --- /dev/null +++ b/include/linux/usb/usb-compat.h @@ -0,0 +1,1957 @@ +/* + * Copyright (C) 2013 + * Texas Instruments Incorporated. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: This code has been backported from linux source include/linux/usb.h + * At the time of the backport the linux source did not contain a license + * nor a copyright. + * + */ + +#ifndef __LINUX_USB_H +#define __LINUX_USB_H + +#define __UBOOT__ + +#ifndef __UBOOT__ +#include <linux/mod_devicetable.h> +#include <linux/usb/ch9.h> +#include <linux/errno.h> /* for -ENODEV */ +#include <linux/delay.h> /* for mdelay() */ +#include <linux/interrupt.h> /* for in_interrupt() */ +#include <linux/list.h> /* for struct list_head */ +#include <linux/kref.h> /* for struct kref */ +#include <linux/device.h> /* for struct device */ +#include <linux/fs.h> /* for struct file_operations */ +#include <linux/completion.h> /* for struct completion */ +#include <linux/sched.h> /* for current && schedule_timeout */ +#include <linux/mutex.h> /* for struct mutex */ +#include <linux/pm_runtime.h> /* for runtime PM */ +#else + +#include <common.h> +#include <linux/list.h> /* for struct list_head */ +#include <linux/usb/ch9.h> +#include <linux/usb/linux-compat.h> + +#include "usb-mod-devicetable.h" + +#endif + +#define USB_MAJOR 180 +#define USB_DEVICE_MAJOR 189 + +struct usb_device; +struct usb_driver; +struct wusb_dev; + +/*-------------------------------------------------------------------------*/ + +/* + * Host-side wrappers for standard USB descriptors ... these are parsed + * from the data provided by devices. Parsing turns them from a flat + * sequence of descriptors into a hierarchy: + * + * - devices have one (usually) or more configs; + * - configs have one (often) or more interfaces; + * - interfaces have one (usually) or more settings; + * - each interface setting has zero or (usually) more endpoints. + * - a SuperSpeed endpoint has a companion descriptor + * + * And there might be other descriptors mixed in with those. + * + * Devices may also have class-specific or vendor-specific descriptors. + */ + +struct ep_device; + +/** + * struct usb_host_endpoint - host-side endpoint descriptor and queue + * @desc: descriptor for this endpoint, wMaxPacketSize in native byteorder + * @ss_ep_comp: SuperSpeed companion descriptor for this endpoint + * @urb_list: urbs queued to this endpoint; maintained by usbcore + * @hcpriv: for use by HCD; typically holds hardware dma queue head (QH) + * with one or more transfer descriptors (TDs) per urb + * @ep_dev: ep_device for sysfs info + * @extra: descriptors following this endpoint in the configuration + * @extralen: how many bytes of "extra" are valid + * @enabled: URBs may be submitted to this endpoint + * + * USB requests are always queued to a given endpoint, identified by a + * descriptor within an active interface in a given USB configuration. + */ +struct usb_host_endpoint { + struct usb_endpoint_descriptor desc; + struct usb_ss_ep_comp_descriptor ss_ep_comp; + struct list_head urb_list; + void *hcpriv; + struct ep_device *ep_dev; /* For sysfs info */ + + unsigned char *extra; /* Extra descriptors */ + int extralen; + int enabled; +}; + +/* host-side wrapper for one interface setting's parsed descriptors */ +struct usb_host_interface { + struct usb_interface_descriptor desc; + + int extralen; + unsigned char *extra; /* Extra descriptors */ + + /* array of desc.bNumEndpoint endpoints associated with this + * interface setting. these will be in no particular order. + */ + struct usb_host_endpoint *endpoint; + + char *string; /* iInterface string, if present */ +}; + +enum usb_interface_condition { + USB_INTERFACE_UNBOUND = 0, + USB_INTERFACE_BINDING, + USB_INTERFACE_BOUND, + USB_INTERFACE_UNBINDING, +}; +#ifdef __UBOOT__ +enum { + /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */ + PACKET_SIZE_8 = 0, + PACKET_SIZE_16 = 1, + PACKET_SIZE_32 = 2, + PACKET_SIZE_64 = 3, +}; +#endif +/** + * struct usb_interface - what usb device drivers talk to + * @altsetting: array of interface structures, one for each alternate + * setting that may be selected. Each one includes a set of + * endpoint configurations. They will be in no particular order. + * @cur_altsetting: the current altsetting. + * @num_altsetting: number of altsettings defined. + * @intf_assoc: interface association descriptor + * @minor: the minor number assigned to this interface, if this + * interface is bound to a driver that uses the USB major number. + * If this interface does not use the USB major, this field should + * be unused. The driver should set this value in the probe() + * function of the driver, after it has been assigned a minor + * number from the USB core by calling usb_register_dev(). + * @condition: binding state of the interface: not bound, binding + * (in probe()), bound to a driver, or unbinding (in disconnect()) + * @sysfs_files_created: sysfs attributes exist + * @ep_devs_created: endpoint child pseudo-devices exist + * @unregistering: flag set when the interface is being unregistered + * @needs_remote_wakeup: flag set when the driver requires remote-wakeup + * capability during autosuspend. + * @needs_altsetting0: flag set when a set-interface request for altsetting 0 + * has been deferred. + * @needs_binding: flag set when the driver should be re-probed or unbound + * following a reset or suspend operation it doesn't support. + * @dev: driver model's view of this device + * @usb_dev: if an interface is bound to the USB major, this will point + * to the sysfs representation for that device. + * @pm_usage_cnt: PM usage counter for this interface + * @reset_ws: Used for scheduling resets from atomic context. + * @reset_running: set to 1 if the interface is currently running a + * queued reset so that usb_cancel_queued_reset() doesn't try to + * remove from the workqueue when running inside the worker + * thread. See __usb_queue_reset_device(). + * @resetting_device: USB core reset the device, so use alt setting 0 as + * current; needs bandwidth alloc after reset. + * + * USB device drivers attach to interfaces on a physical device. Each + * interface encapsulates a single high level function, such as feeding + * an audio stream to a speaker or reporting a change in a volume control. + * Many USB devices only have one interface. The protocol used to talk to + * an interface's endpoints can be defined in a usb "class" specification, + * or by a product's vendor. The (default) control endpoint is part of + * every interface, but is never listed among the interface's descriptors. + * + * The driver that is bound to the interface can use standard driver model + * calls such as dev_get_drvdata() on the dev member of this structure. + * + * Each interface may have alternate settings. The initial configuration + * of a device sets altsetting 0, but the device driver can change + * that setting using usb_set_interface(). Alternate settings are often + * used to control the use of periodic endpoints, such as by having + * different endpoints use different amounts of reserved USB bandwidth. + * All standards-conformant USB devices that use isochronous endpoints + * will use them in non-default settings. + * + * The USB specification says that alternate setting numbers must run from + * 0 to one less than the total number of alternate settings. But some + * devices manage to mess this up, and the structures aren't necessarily + * stored in numerical order anyhow. Use usb_altnum_to_altsetting() to + * look up an alternate setting in the altsetting array based on its number. + */ +struct usb_interface { + /* array of alternate settings for this interface, + * stored in no particular order */ + struct usb_host_interface *altsetting; + + struct usb_host_interface *cur_altsetting; /* the currently + * active alternate setting */ + unsigned num_altsetting; /* number of alternate settings */ + + /* If there is an interface association descriptor then it will list + * the associated interfaces */ + struct usb_interface_assoc_descriptor *intf_assoc; +#ifdef __UBOOT__ +#define USB_MAXENDPOINTS 16 + struct usb_interface_descriptor desc; + struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + unsigned char no_of_ep; + unsigned char act_altsetting; + struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; +#endif + int minor; /* minor number this interface is + * bound to */ + enum usb_interface_condition condition; /* state of binding */ + unsigned sysfs_files_created:1; /* the sysfs attributes exist */ + unsigned ep_devs_created:1; /* endpoint "devices" exist */ + unsigned unregistering:1; /* unregistration is in progress */ + unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ + unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ + unsigned needs_binding:1; /* needs delayed unbind/rebind */ + unsigned reset_running:1; + unsigned resetting_device:1; /* true: bandwidth alloc after reset */ + + struct device dev; /* interface specific device info */ + struct device *usb_dev; +#ifndef __UBOOT__ + atomic_t pm_usage_cnt; /* usage counter for autosuspend */ + struct work_struct reset_ws; /* for resets in atomic context */ +#endif +}; +#define to_usb_interface(d) container_of(d, struct usb_interface, dev) + +static inline void *usb_get_intfdata(struct usb_interface *intf) +{ +#ifndef __UBOOT__ + return dev_get_drvdata(&intf->dev); +#else + /* TODO Need to implement this to return the correct pointer */ + return NULL; +#endif +} + +static inline void usb_set_intfdata(struct usb_interface *intf, void *data) +{ +#ifndef __UBOOT__ + dev_set_drvdata(&intf->dev, data); +#else + /* TODO Need to implement this to return the correct pointer */ + return; +#endif +} + +struct usb_interface *usb_get_intf(struct usb_interface *intf); +void usb_put_intf(struct usb_interface *intf); + +/* this maximum is arbitrary */ +#define USB_MAXINTERFACES 32 +#define USB_MAXIADS (USB_MAXINTERFACES/2) + +/** + * struct usb_interface_cache - long-term representation of a device interface + * @num_altsetting: number of altsettings defined. + * @ref: reference counter. + * @altsetting: variable-length array of interface structures, one for + * each alternate setting that may be selected. Each one includes a + * set of endpoint configurations. They will be in no particular order. + * + * These structures persist for the lifetime of a usb_device, unlike + * struct usb_interface (which persists only as long as its configuration + * is installed). The altsetting arrays can be accessed through these + * structures at any time, permitting comparison of configurations and + * providing support for the /proc/bus/usb/devices pseudo-file. + */ +struct usb_interface_cache { + unsigned num_altsetting; /* number of alternate settings */ +#ifndef __UBOOT__ + struct kref ref; /* reference counter */ +#endif + + /* variable-length array of alternate settings for this interface, + * stored in no particular order */ + struct usb_host_interface altsetting[0]; +}; +#define ref_to_usb_interface_cache(r) \ + container_of(r, struct usb_interface_cache, ref) +#define altsetting_to_usb_interface_cache(a) \ + container_of(a, struct usb_interface_cache, altsetting[0]) + +#ifdef __UBOOT__ +/* Configuration information.. */ +struct usb_config { + struct usb_config_descriptor desc; + + unsigned char no_of_if; /* number of interfaces */ + struct usb_interface if_desc[USB_MAXINTERFACES]; +} __attribute__ ((packed)); +#endif + +/** + * struct usb_host_config - representation of a device's configuration + * @desc: the device's configuration descriptor. + * @string: pointer to the cached version of the iConfiguration string, if + * present for this configuration. + * @intf_assoc: list of any interface association descriptors in this config + * @interface: array of pointers to usb_interface structures, one for each + * interface in the configuration. The number of interfaces is stored + * in desc.bNumInterfaces. These pointers are valid only while the + * the configuration is active. + * @intf_cache: array of pointers to usb_interface_cache structures, one + * for each interface in the configuration. These structures exist + * for the entire life of the device. + * @extra: pointer to buffer containing all extra descriptors associated + * with this configuration (those preceding the first interface + * descriptor). + * @extralen: length of the extra descriptors buffer. + * + * USB devices may have multiple configurations, but only one can be active + * at any time. Each encapsulates a different operational environment; + * for example, a dual-speed device would have separate configurations for + * full-speed and high-speed operation. The number of configurations + * available is stored in the device descriptor as bNumConfigurations. + * + * A configuration can contain multiple interfaces. Each corresponds to + * a different function of the USB device, and all are available whenever + * the configuration is active. The USB standard says that interfaces + * are supposed to be numbered from 0 to desc.bNumInterfaces-1, but a lot + * of devices get this wrong. In addition, the interface array is not + * guaranteed to be sorted in numerical order. Use usb_ifnum_to_if() to + * look up an interface entry based on its number. + * + * Device drivers should not attempt to activate configurations. The choice + * of which configuration to install is a policy decision based on such + * considerations as available power, functionality provided, and the user's + * desires (expressed through userspace tools). However, drivers can call + * usb_reset_configuration() to reinitialize the current configuration and + * all its interfaces. + */ +struct usb_host_config { + struct usb_config_descriptor desc; + char *string; /* iConfiguration string, if present */ + + /* List of any Interface Association Descriptors in this + * configuration. */ + struct usb_interface_assoc_descriptor *intf_assoc[USB_MAXIADS]; + + /* the interfaces associated with this configuration, + * stored in no particular order */ + struct usb_interface *interface[USB_MAXINTERFACES]; + + /* Interface information available even when this is not the + * active configuration */ + struct usb_interface_cache *intf_cache[USB_MAXINTERFACES]; + + unsigned char *extra; /* Extra descriptors */ + int extralen; +}; + +/* USB2.0 and USB3.0 device BOS descriptor set */ +struct usb_host_bos { + struct usb_bos_descriptor *desc; + + /* wireless cap descriptor is handled by wusb */ + struct usb_ext_cap_descriptor *ext_cap; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_ss_container_id_descriptor *ss_id; +}; + +int __usb_get_extra_descriptor(char *buffer, unsigned size, + unsigned char type, void **ptr); +#define usb_get_extra_descriptor(ifpoint, type, ptr) \ + __usb_get_extra_descriptor((ifpoint)->extra, \ + (ifpoint)->extralen, \ + type, (void **)ptr) + +/* ----------------------------------------------------------------------- */ + +/* USB device number allocation bitmap */ +struct usb_devmap { + unsigned long devicemap[128 / (8*sizeof(unsigned long))]; +}; + +/* + * Allocated per bus (tree of devices) we have: + */ +struct usb_bus { + struct device *controller; /* host/master side hardware */ + int busnum; /* Bus number (in order of reg) */ + const char *bus_name; /* stable id (PCI slot_name etc) */ + u8 uses_dma; /* Does the host controller use DMA? */ + u8 uses_pio_for_control; /* + * Does the host controller use PIO + * for control transfers? + */ + u8 otg_port; /* 0, or number of OTG/HNP port */ + unsigned is_b_host:1; /* true during some HNP roleswitches */ + unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */ + unsigned no_stop_on_short:1; /* + * Quirk: some controllers don't stop + * the ep queue on a short transfer + * with the URB_SHORT_NOT_OK flag set. + */ + unsigned sg_tablesize; /* 0 or largest number of sg list entries */ + + int devnum_next; /* Next open device number in + * round-robin allocation */ + + struct usb_devmap devmap; /* device address allocation map */ + struct usb_device *root_hub; /* Root hub */ + struct usb_bus *hs_companion; /* Companion EHCI bus, if any */ + struct list_head bus_list; /* list of busses */ + + int bandwidth_allocated; /* on this bus: how much of the time + * reserved for periodic (intr/iso) + * requests is used, on average? + * Units: microseconds/frame. + * Limits: Full/low speed reserve 90%, + * while high speed reserves 80%. + */ + int bandwidth_int_reqs; /* number of Interrupt requests */ + int bandwidth_isoc_reqs; /* number of Isoc. requests */ + + unsigned resuming_ports; /* bit array: resuming root-hub ports */ + +#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) + struct mon_bus *mon_bus; /* non-null when associated */ + int monitored; /* non-zero when monitored */ +#endif +}; + +/* ----------------------------------------------------------------------- */ + +/* This is arbitrary. + * From USB 2.0 spec Table 11-13, offset 7, a hub can + * have up to 255 ports. The most yet reported is 10. + * + * Current Wireless USB host hardware (Intel i1480 for example) allows + * up to 22 devices to connect. Upcoming hardware might raise that + * limit. Because the arrays need to add a bit for hub status data, we + * do 31, so plus one evens out to four bytes. + */ +#define USB_MAXCHILDREN (31) + +struct usb_tt; + +enum usb_device_removable { + USB_DEVICE_REMOVABLE_UNKNOWN = 0, + USB_DEVICE_REMOVABLE, + USB_DEVICE_FIXED, +}; + +enum usb_port_connect_type { + USB_PORT_CONNECT_TYPE_UNKNOWN = 0, + USB_PORT_CONNECT_TYPE_HOT_PLUG, + USB_PORT_CONNECT_TYPE_HARD_WIRED, + USB_PORT_NOT_USED, +}; + +/* + * USB 3.0 Link Power Management (LPM) parameters. + * + * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit. + * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit. + * All three are stored in nanoseconds. + */ +struct usb3_lpm_parameters { + /* + * Maximum exit latency (MEL) for the host to send a packet to the + * device (either a Ping for isoc endpoints, or a data packet for + * interrupt endpoints), the hubs to decode the packet, and for all hubs + * in the path to transition the links to U0. + */ + unsigned int mel; + /* + * Maximum exit latency for a device-initiated LPM transition to bring + * all links into U0. Abbreviated as "PEL" in section 9.4.12 of the USB + * 3.0 spec, with no explanation of what "P" stands for. "Path"? + */ + unsigned int pel; + + /* + * The System Exit Latency (SEL) includes PEL, and three other + * latencies. After a device initiates a U0 transition, it will take + * some time from when the device sends the ERDY to when it will finally + * receive the data packet. Basically, SEL should be the worse-case + * latency from when a device starts initiating a U0 transition to when + * it will get data. + */ + unsigned int sel; + /* + * The idle timeout value that is currently programmed into the parent + * hub for this device. When the timer counts to zero, the parent hub + * will initiate an LPM transition to either U1 or U2. + */ + int timeout; +}; + +/** + * struct usb_device - kernel's representation of a USB device + * @devnum: device number; address on a USB bus + * @devpath: device ID string for use in messages (e.g., /port/...) + * @route: tree topology hex string for use with xHCI + * @state: device state: configured, not attached, etc. + * @speed: device speed: high/full/low (or error) + * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub + * @ttport: device port on that tt hub + * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints + * @parent: our hub, unless we're the root + * @bus: bus we're part of + * @ep0: endpoint 0 data (default control pipe) + * @dev: generic device interface + * @descriptor: USB device descriptor + * @bos: USB device BOS descriptor set + * @config: all of the device's configs + * @actconfig: the active configuration + * @ep_in: array of IN endpoints + * @ep_out: array of OUT endpoints + * @rawdescriptors: raw descriptors for each config + * @bus_mA: Current available from the bus + * @portnum: parent port number (origin 1) + * @level: number of USB hub ancestors + * @can_submit: URBs may be submitted + * @persist_enabled: USB_PERSIST enabled for this device + * @have_langid: whether string_langid is valid + * @authorized: policy has said we can use it; + * (user space) policy determines if we authorize this device to be + * used or not. By default, wired USB devices are authorized. + * WUSB devices are not, until we authorize them from user space. + * FIXME -- complete doc + * @authenticated: Crypto authentication passed + * @wusb: device is Wireless USB + * @lpm_capable: device supports LPM + * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM + * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled + * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @string_langid: language ID for strings + * @product: iProduct string, if present (static) + * @manufacturer: iManufacturer string, if present (static) + * @serial: iSerialNumber string, if present (static) + * @filelist: usbfs files that are open to this device + * @maxchild: number of ports if hub + * @quirks: quirks of the whole device + * @urbnum: number of URBs submitted for the whole device + * @active_duration: total time device is not suspended + * @connect_time: time device was first connected + * @do_remote_wakeup: remote wakeup should be enabled + * @reset_resume: needs reset instead of resume + * @port_is_suspended: the upstream port is suspended (L2 or U3) + * @wusb_dev: if this is a Wireless USB device, link to the WUSB + * specific data for the device. + * @slot_id: Slot ID assigned by xHCI + * @removable: Device can be physically removed from this port + * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout. + * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout. + * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm() + * to keep track of the number of functions that require USB 3.0 Link Power + * Management to be disabled for this usb_device. This count should only + * be manipulated by those functions, with the bandwidth_mutex is held. + * + * Notes: + * Usbcore drivers should not set usbdev->state directly. Instead use + * usb_set_device_state(). + */ +struct usb_device { + int devnum; + char devpath[16]; +#ifdef __UBOOT__ + /* Legacy uBoot usb_device definitions */ + char mf[32]; /* manufacturer */ + char prod[32]; /* product */ + + struct usb_device *children[USB_MAXCHILDREN]; + struct usb_config config; /* config descriptor */ + + int epmaxpacketin[16]; /* INput endpoint specific maximums */ + int epmaxpacketout[16]; /* OUTput endpoint specific maximums */ + int configno; /* selected config number */ + int act_len; /* transfered bytes */ + int portnr; + /* Maximum packet size; one of: PACKET_SIZE_* */ + int maxpacketsize; + int irq_act_len; /* transfered bytes */ + int (*irq_handle)(struct usb_device *dev); + + /* endpoint halts; one bit per endpoint # & direction; + * [0] = IN, [1] = OUT + */ + unsigned int halted[2]; + unsigned long status; + unsigned long irq_status; + + void *controller; /* hardware controller private data */ + void *privptr; +#endif + u32 route; + enum usb_device_state state; + enum usb_device_speed speed; + + struct usb_tt *tt; + int ttport; + + unsigned int toggle[2]; + + struct usb_device *parent; + struct usb_bus *bus; + struct usb_host_endpoint ep0; + + struct device dev; + + struct usb_device_descriptor descriptor; + struct usb_host_bos *bos; +#ifndef __UBOOT__ + /* This conflicts with legacy uBoot config */ + struct usb_host_config *config; +#else + struct usb_host_config *host_config; +#endif + struct usb_host_config *actconfig; + struct usb_host_endpoint *ep_in[16]; + struct usb_host_endpoint *ep_out[16]; + + char **rawdescriptors; + + unsigned short bus_mA; + u8 portnum; + u8 level; + + unsigned can_submit:1; + unsigned persist_enabled:1; + unsigned have_langid:1; + unsigned authorized:1; + unsigned authenticated:1; + unsigned wusb:1; + unsigned lpm_capable:1; + unsigned usb2_hw_lpm_capable:1; + unsigned usb2_hw_lpm_enabled:1; + unsigned usb3_lpm_enabled:1; + int string_langid; + + /* static strings from the device */ + char *product; + char *manufacturer; + char *serial; + + struct list_head filelist; + + int maxchild; + + u32 quirks; +#ifndef __UBOOT__ + atomic_t urbnum; +#endif + unsigned long active_duration; + +#ifdef CONFIG_PM + unsigned long connect_time; + + unsigned do_remote_wakeup:1; + unsigned reset_resume:1; + unsigned port_is_suspended:1; +#endif + struct wusb_dev *wusb_dev; + int slot_id; + enum usb_device_removable removable; + struct usb3_lpm_parameters u1_params; + struct usb3_lpm_parameters u2_params; + unsigned lpm_disable_count; +}; + +#define to_usb_device(d) container_of(d, struct usb_device, dev) +static inline struct usb_device *interface_to_usbdev(struct usb_interface *intf) +{ + return to_usb_device(intf->dev.parent); +} + +extern struct usb_device *usb_get_dev(struct usb_device *dev); +extern void usb_put_dev(struct usb_device *dev); +extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, + int port1); + +/** + * usb_hub_for_each_child - iterate over all child devices on the hub + * @hdev: USB device belonging to the usb hub + * @port1: portnum associated with child device + * @child: child device pointer + */ +#define usb_hub_for_each_child(hdev, port1, child) \ + for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) \ + if (!child) continue; else + +/* USB device locking */ +#define usb_lock_device(udev) device_lock(&(udev)->dev) +#define usb_unlock_device(udev) device_unlock(&(udev)->dev) +#define usb_trylock_device(udev) device_trylock(&(udev)->dev) +extern int usb_lock_device_for_reset(struct usb_device *udev, + const struct usb_interface *iface); + +/* USB port reset for device reinitialization */ +extern int usb_reset_device(struct usb_device *dev); +extern void usb_queue_reset_device(struct usb_interface *dev); + +#ifdef CONFIG_ACPI +extern int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable); +extern bool usb_acpi_power_manageable(struct usb_device *hdev, int index); +#else +static inline int usb_acpi_set_power_state(struct usb_device *hdev, int index, + bool enable) { return 0; } +static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) + { return true; } +#endif + +/* USB autosuspend and autoresume */ +#ifdef CONFIG_PM_RUNTIME +extern void usb_enable_autosuspend(struct usb_device *udev); +extern void usb_disable_autosuspend(struct usb_device *udev); + +extern int usb_autopm_get_interface(struct usb_interface *intf); +extern void usb_autopm_put_interface(struct usb_interface *intf); +extern int usb_autopm_get_interface_async(struct usb_interface *intf); +extern void usb_autopm_put_interface_async(struct usb_interface *intf); +extern void usb_autopm_get_interface_no_resume(struct usb_interface *intf); +extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf); + +static inline void usb_mark_last_busy(struct usb_device *udev) +{ + pm_runtime_mark_last_busy(&udev->dev); +} + +#else + +static inline int usb_enable_autosuspend(struct usb_device *udev) +{ return 0; } +static inline int usb_disable_autosuspend(struct usb_device *udev) +{ return 0; } + +static inline int usb_autopm_get_interface(struct usb_interface *intf) +{ return 0; } +static inline int usb_autopm_get_interface_async(struct usb_interface *intf) +{ return 0; } + +static inline void usb_autopm_put_interface(struct usb_interface *intf) +{ } +static inline void usb_autopm_put_interface_async(struct usb_interface *intf) +{ } +static inline void usb_autopm_get_interface_no_resume( + struct usb_interface *intf) +{ } +static inline void usb_autopm_put_interface_no_suspend( + struct usb_interface *intf) +{ } +static inline void usb_mark_last_busy(struct usb_device *udev) +{ } +#endif + +extern int usb_disable_lpm(struct usb_device *udev); +extern void usb_enable_lpm(struct usb_device *udev); +/* Same as above, but these functions lock/unlock the bandwidth_mutex. */ +extern int usb_unlocked_disable_lpm(struct usb_device *udev); +extern void usb_unlocked_enable_lpm(struct usb_device *udev); + +extern int usb_disable_ltm(struct usb_device *udev); +extern void usb_enable_ltm(struct usb_device *udev); + +static inline bool usb_device_supports_ltm(struct usb_device *udev) +{ + if (udev->speed != USB_SPEED_SUPER || !udev->bos || !udev->bos->ss_cap) + return false; + return udev->bos->ss_cap->bmAttributes & USB_LTM_SUPPORT; +} + + +/*-------------------------------------------------------------------------*/ + +/* for drivers using iso endpoints */ +extern int usb_get_current_frame_number(struct usb_device *usb_dev); + +/* Sets up a group of bulk endpoints to support multiple stream IDs. */ +extern int usb_alloc_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + unsigned int num_streams, gfp_t mem_flags); + +/* Reverts a group of bulk endpoints back to not using stream IDs. */ +extern void usb_free_streams(struct usb_interface *interface, + struct usb_host_endpoint **eps, unsigned int num_eps, + gfp_t mem_flags); + +/* used these for multi-interface device registration */ +extern int usb_driver_claim_interface(struct usb_driver *driver, + struct usb_interface *iface, void *priv); + +/** + * usb_interface_claimed - returns true iff an interface is claimed + * @iface: the interface being checked + * + * Returns true (nonzero) iff the interface is claimed, else false (zero). + * Callers must own the driver model's usb bus readlock. So driver + * probe() entries don't need extra locking, but other call contexts + * may need to explicitly claim that lock. + * + */ +static inline int usb_interface_claimed(struct usb_interface *iface) +{ +#ifndef __UBOOT__ + return (iface->dev.driver != NULL); +#else + return true; +#endif +} + +extern void usb_driver_release_interface(struct usb_driver *driver, + struct usb_interface *iface); +const struct usb_device_id *usb_match_id(struct usb_interface *interface, + const struct usb_device_id *id); +extern int usb_match_one_id(struct usb_interface *interface, + const struct usb_device_id *id); + +extern struct usb_interface *usb_find_interface(struct usb_driver *drv, + int minor); +extern struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, + unsigned ifnum); +extern struct usb_host_interface *usb_altnum_to_altsetting( + const struct usb_interface *intf, unsigned int altnum); +extern struct usb_host_interface *usb_find_alt_setting( + struct usb_host_config *config, + unsigned int iface_num, + unsigned int alt_num); + + +/** + * usb_make_path - returns stable device path in the usb tree + * @dev: the device whose path is being constructed + * @buf: where to put the string + * @size: how big is "buf"? + * + * Returns length of the string (> 0) or negative if size was too small. + * + * This identifier is intended to be "stable", reflecting physical paths in + * hardware such as physical bus addresses for host controllers or ports on + * USB hubs. That makes it stay the same until systems are physically + * reconfigured, by re-cabling a tree of USB devices or by moving USB host + * controllers. Adding and removing devices, including virtual root hubs + * in host controller driver modules, does not change these path identifiers; + * neither does rebooting or re-enumerating. These are more useful identifiers + * than changeable ("unstable") ones like bus numbers or device addresses. + * + * With a partial exception for devices connected to USB 2.0 root hubs, these + * identifiers are also predictable. So long as the device tree isn't changed, + * plugging any USB device into a given hub port always gives it the same path. + * Because of the use of "companion" controllers, devices connected to ports on + * USB 2.0 root hubs (EHCI host controllers) will get one path ID if they are + * high speed, and a different one if they are full or low speed. + */ +static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) +{ + int actual; + actual = snprintf(buf, size, "usb-%s-%s", dev->bus->bus_name, + dev->devpath); + return (actual >= (int)size) ? -1 : actual; +} + +/*-------------------------------------------------------------------------*/ + +#define USB_DEVICE_ID_MATCH_DEVICE \ + (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT) +#define USB_DEVICE_ID_MATCH_DEV_RANGE \ + (USB_DEVICE_ID_MATCH_DEV_LO | USB_DEVICE_ID_MATCH_DEV_HI) +#define USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION \ + (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_RANGE) +#define USB_DEVICE_ID_MATCH_DEV_INFO \ + (USB_DEVICE_ID_MATCH_DEV_CLASS | \ + USB_DEVICE_ID_MATCH_DEV_SUBCLASS | \ + USB_DEVICE_ID_MATCH_DEV_PROTOCOL) +#define USB_DEVICE_ID_MATCH_INT_INFO \ + (USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_SUBCLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL) + +/** + * USB_DEVICE - macro used to describe a specific usb device + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * + * This macro is used to create a struct usb_device_id that matches a + * specific device. + */ +#define USB_DEVICE(vend, prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod) +/** + * USB_DEVICE_VER - describe a specific usb device with a version range + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @lo: the bcdDevice_lo value + * @hi: the bcdDevice_hi value + * + * This macro is used to create a struct usb_device_id that matches a + * specific device, with a version range. + */ +#define USB_DEVICE_VER(vend, prod, lo, hi) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE_AND_VERSION, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bcdDevice_lo = (lo), \ + .bcdDevice_hi = (hi) + +/** + * USB_DEVICE_INTERFACE_CLASS - describe a usb device with a specific interface class + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface class of devices. + */ +#define USB_DEVICE_INTERFACE_CLASS(vend, prod, cl) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (cl) + +/** + * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface protocol of devices. + */ +#define USB_DEVICE_INTERFACE_PROTOCOL(vend, prod, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceProtocol = (pr) + +/** + * USB_DEVICE_INTERFACE_NUMBER - describe a usb device with a specific interface number + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @num: bInterfaceNumber value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface number of devices. + */ +#define USB_DEVICE_INTERFACE_NUMBER(vend, prod, num) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_NUMBER, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceNumber = (num) + +/** + * USB_DEVICE_INFO - macro used to describe a class of usb devices + * @cl: bDeviceClass value + * @sc: bDeviceSubClass value + * @pr: bDeviceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific class of devices. + */ +#define USB_DEVICE_INFO(cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_DEV_INFO, \ + .bDeviceClass = (cl), \ + .bDeviceSubClass = (sc), \ + .bDeviceProtocol = (pr) + +/** + * USB_INTERFACE_INFO - macro used to describe a class of usb interfaces + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific class of interfaces. + */ +#define USB_INTERFACE_INFO(cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO, \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + +/** + * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific device with a specific class of interfaces. + * + * This is especially useful when explicitly matching devices that have + * vendor specific bDeviceClass values, but standards-compliant interfaces. + */ +#define USB_DEVICE_AND_INTERFACE_INFO(vend, prod, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + +/** + * USB_VENDOR_AND_INTERFACE_INFO - describe a specific usb vendor with a class of usb interfaces + * @vend: the 16 bit USB Vendor ID + * @cl: bInterfaceClass value + * @sc: bInterfaceSubClass value + * @pr: bInterfaceProtocol value + * + * This macro is used to create a struct usb_device_id that matches a + * specific vendor with a specific class of interfaces. + * + * This is especially useful when explicitly matching devices that have + * vendor specific bDeviceClass values, but standards-compliant interfaces. + */ +#define USB_VENDOR_AND_INTERFACE_INFO(vend, cl, sc, pr) \ + .match_flags = USB_DEVICE_ID_MATCH_INT_INFO \ + | USB_DEVICE_ID_MATCH_VENDOR, \ + .idVendor = (vend), \ + .bInterfaceClass = (cl), \ + .bInterfaceSubClass = (sc), \ + .bInterfaceProtocol = (pr) + +/* ----------------------------------------------------------------------- */ + +/* Stuff for dynamic usb ids */ +struct usb_dynids { + spinlock_t lock; + struct list_head list; +}; + +struct usb_dynid { + struct list_head node; + struct usb_device_id id; +}; + +extern ssize_t usb_store_new_id(struct usb_dynids *dynids, + struct device_driver *driver, + const char *buf, size_t count); + +extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf); + +/** + * struct usbdrv_wrap - wrapper for driver-model structure + * @driver: The driver-model core driver structure. + * @for_devices: Non-zero for device drivers, 0 for interface drivers. + */ +struct usbdrv_wrap { + struct device_driver driver; + int for_devices; +}; + +/** + * struct usb_driver - identifies USB interface driver to usbcore + * @name: The driver name should be unique among USB drivers, + * and should normally be the same as the module name. + * @probe: Called to see if the driver is willing to manage a particular + * interface on a device. If it is, probe returns zero and uses + * usb_set_intfdata() to associate driver-specific data with the + * interface. It may also use usb_set_interface() to specify the + * appropriate altsetting. If unwilling to manage the interface, + * return -ENODEV, if genuine IO errors occurred, an appropriate + * negative errno value. + * @disconnect: Called when the interface is no longer accessible, usually + * because its device has been (or is being) disconnected or the + * driver module is being unloaded. + * @unlocked_ioctl: Used for drivers that want to talk to userspace through + * the "usbfs" filesystem. This lets devices provide ways to + * expose information to user space regardless of where they + * do (or don't) show up otherwise in the filesystem. + * @suspend: Called when the device is going to be suspended by the + * system either from system sleep or runtime suspend context. The + * return value will be ignored in system sleep context, so do NOT + * try to continue using the device if suspend fails in this case. + * Instead, let the resume or reset-resume routine recover from + * the failure. + * @resume: Called when the device is being resumed by the system. + * @reset_resume: Called when the suspended device has been reset instead + * of being resumed. + * @pre_reset: Called by usb_reset_device() when the device is about to be + * reset. This routine must not return until the driver has no active + * URBs for the device, and no more URBs may be submitted until the + * post_reset method is called. + * @post_reset: Called by usb_reset_device() after the device + * has been reset + * @id_table: USB drivers use ID table to support hotplugging. + * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set + * or your driver's probe function will never get called. + * @dynids: used internally to hold the list of dynamically added device + * ids for this driver. + * @drvwrap: Driver-model core structure wrapper. + * @no_dynamic_id: if set to 1, the USB core will not allow dynamic ids to be + * added to this driver by preventing the sysfs file from being created. + * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend + * for interfaces bound to this driver. + * @soft_unbind: if set to 1, the USB core will not kill URBs and disable + * endpoints before calling the driver's disconnect method. + * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs + * to initiate lower power link state transitions when an idle timeout + * occurs. Device-initiated USB 3.0 link PM will still be allowed. + * + * USB interface drivers must provide a name, probe() and disconnect() + * methods, and an id_table. Other driver fields are optional. + * + * The id_table is used in hotplugging. It holds a set of descriptors, + * and specialized data may be associated with each entry. That table + * is used by both user and kernel mode hotplugging support. + * + * The probe() and disconnect() methods are called in a context where + * they can sleep, but they should avoid abusing the privilege. Most + * work to connect to a device should be done when the device is opened, + * and undone at the last close. The disconnect code needs to address + * concurrency issues with respect to open() and close() methods, as + * well as forcing all pending I/O requests to complete (by unlinking + * them as necessary, and blocking until the unlinks complete). + */ +struct usb_driver { + const char *name; + + int (*probe) (struct usb_interface *intf, + const struct usb_device_id *id); + + void (*disconnect) (struct usb_interface *intf); + + int (*unlocked_ioctl) (struct usb_interface *intf, unsigned int code, + void *buf); +#ifdef CONFIG_PM + int (*suspend) (struct usb_interface *intf, pm_message_t message); + int (*resume) (struct usb_interface *intf); + int (*reset_resume)(struct usb_interface *intf); +#endif + int (*pre_reset)(struct usb_interface *intf); + int (*post_reset)(struct usb_interface *intf); + + const struct usb_device_id *id_table; + + struct usb_dynids dynids; + struct usbdrv_wrap drvwrap; + unsigned int no_dynamic_id:1; + unsigned int supports_autosuspend:1; + unsigned int disable_hub_initiated_lpm:1; + unsigned int soft_unbind:1; +}; +#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) + +/** + * struct usb_device_driver - identifies USB device driver to usbcore + * @name: The driver name should be unique among USB drivers, + * and should normally be the same as the module name. + * @probe: Called to see if the driver is willing to manage a particular + * device. If it is, probe returns zero and uses dev_set_drvdata() + * to associate driver-specific data with the device. If unwilling + * to manage the device, return a negative errno value. + * @disconnect: Called when the device is no longer accessible, usually + * because it has been (or is being) disconnected or the driver's + * module is being unloaded. + * @suspend: Called when the device is going to be suspended by the system. + * @resume: Called when the device is being resumed by the system. + * @drvwrap: Driver-model core structure wrapper. + * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend + * for devices bound to this driver. + * + * USB drivers must provide all the fields listed above except drvwrap. + */ +struct usb_device_driver { + const char *name; + + int (*probe) (struct usb_device *udev); + void (*disconnect) (struct usb_device *udev); +#ifdef CONFIG_PM + int (*suspend) (struct usb_device *udev, pm_message_t message); + int (*resume) (struct usb_device *udev, pm_message_t message); +#endif + struct usbdrv_wrap drvwrap; + unsigned int supports_autosuspend:1; +}; +#define to_usb_device_driver(d) container_of(d, struct usb_device_driver, \ + drvwrap.driver) + +extern struct bus_type usb_bus_type; + +/** + * struct usb_class_driver - identifies a USB driver that wants to use the USB major number + * @name: the usb class device name for this driver. Will show up in sysfs. + * @devnode: Callback to provide a naming hint for a possible + * device node to create. + * @fops: pointer to the struct file_operations of this driver. + * @minor_base: the start of the minor range for this driver. + * + * This structure is used for the usb_register_dev() and + * usb_unregister_dev() functions, to consolidate a number of the + * parameters used for them. + */ +struct usb_class_driver { + char *name; + char *(*devnode)(struct device *dev, umode_t *mode); + const struct file_operations *fops; + int minor_base; +}; +#ifndef __UBOOT__ +/* + * use these in module_init()/module_exit() + * and don't forget MODULE_DEVICE_TABLE(usb, ...) + */ +extern int usb_register_driver(struct usb_driver *, struct module *, + const char *); + +/* use a define to avoid include chaining to get THIS_MODULE & friends */ +#define usb_register(driver) \ + usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME) + +extern void usb_deregister(struct usb_driver *); + +/** + * module_usb_driver() - Helper macro for registering a USB driver + * @__usb_driver: usb_driver struct + * + * Helper macro for USB drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_usb_driver(__usb_driver) \ + module_driver(__usb_driver, usb_register, \ + usb_deregister) + +extern int usb_register_device_driver(struct usb_device_driver *, + struct module *); +extern void usb_deregister_device_driver(struct usb_device_driver *); + +extern int usb_register_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver); +extern void usb_deregister_dev(struct usb_interface *intf, + struct usb_class_driver *class_driver); + +extern int usb_disabled(void); +#endif /* __UBOOT__ */ +/* ----------------------------------------------------------------------- */ + +/* + * URB support, for asynchronous request completions + */ + +/* + * urb->transfer_flags: + * + * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). + */ +#define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ +#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired + * slot in the schedule */ +#define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ +#define URB_NO_FSBR 0x0020 /* UHCI-specific */ +#define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ +#define URB_NO_INTERRUPT 0x0080 /* HINT: no non-error interrupt + * needed */ +#define URB_FREE_BUFFER 0x0100 /* Free transfer buffer with the URB */ + +/* The following flags are used internally by usbcore and HCDs */ +#define URB_DIR_IN 0x0200 /* Transfer from device to host */ +#define URB_DIR_OUT 0 +#define URB_DIR_MASK URB_DIR_IN + +#define URB_DMA_MAP_SINGLE 0x00010000 /* Non-scatter-gather mapping */ +#define URB_DMA_MAP_PAGE 0x00020000 /* HCD-unsupported S-G */ +#define URB_DMA_MAP_SG 0x00040000 /* HCD-supported S-G */ +#define URB_MAP_LOCAL 0x00080000 /* HCD-local-memory mapping */ +#define URB_SETUP_MAP_SINGLE 0x00100000 /* Setup packet DMA mapped */ +#define URB_SETUP_MAP_LOCAL 0x00200000 /* HCD-local setup packet */ +#define URB_DMA_SG_COMBINED 0x00400000 /* S-G entries were combined */ +#define URB_ALIGNED_TEMP_BUFFER 0x00800000 /* Temp buffer was alloc'd */ + +struct usb_iso_packet_descriptor { + unsigned int offset; + unsigned int length; /* expected length */ + unsigned int actual_length; + int status; +}; + +struct urb; + +struct usb_anchor { + struct list_head urb_list; +#ifndef __UBOOT__ + wait_queue_head_t wait; +#endif + spinlock_t lock; + unsigned int poisoned:1; +}; + +static inline void init_usb_anchor(struct usb_anchor *anchor) +{ + INIT_LIST_HEAD(&anchor->urb_list); +#ifndef __UBOOT__ + init_waitqueue_head(&anchor->wait); +#endif + spin_lock_init(&anchor->lock); +} + +typedef void (*usb_complete_t)(struct urb *); + +/** + * struct urb - USB Request Block + * @urb_list: For use by current owner of the URB. + * @anchor_list: membership in the list of an anchor + * @anchor: to anchor URBs to a common mooring + * @ep: Points to the endpoint's data structure. Will eventually + * replace @pipe. + * @pipe: Holds endpoint number, direction, type, and more. + * Create these values with the eight macros available; + * usb_{snd,rcv}TYPEpipe(dev,endpoint), where the TYPE is "ctrl" + * (control), "bulk", "int" (interrupt), or "iso" (isochronous). + * For example usb_sndbulkpipe() or usb_rcvintpipe(). Endpoint + * numbers range from zero to fifteen. Note that "in" endpoint two + * is a different endpoint (and pipe) from "out" endpoint two. + * The current configuration controls the existence, type, and + * maximum packet size of any given endpoint. + * @stream_id: the endpoint's stream ID for bulk streams + * @dev: Identifies the USB device to perform the request. + * @status: This is read in non-iso completion functions to get the + * status of the particular request. ISO requests only use it + * to tell whether the URB was unlinked; detailed status for + * each frame is in the fields of the iso_frame-desc. + * @transfer_flags: A variety of flags may be used to affect how URB + * submission, unlinking, or operation are handled. Different + * kinds of URB can use different flags. + * @transfer_buffer: This identifies the buffer to (or from) which the I/O + * request will be performed unless URB_NO_TRANSFER_DMA_MAP is set + * (however, do not leave garbage in transfer_buffer even then). + * This buffer must be suitable for DMA; allocate it with + * kmalloc() or equivalent. For transfers to "in" endpoints, contents + * of this buffer will be modified. This buffer is used for the data + * stage of control transfers. + * @transfer_dma: When transfer_flags includes URB_NO_TRANSFER_DMA_MAP, + * the device driver is saying that it provided this DMA address, + * which the host controller driver should use in preference to the + * transfer_buffer. + * @sg: scatter gather buffer list + * @num_mapped_sgs: (internal) number of mapped sg entries + * @num_sgs: number of entries in the sg list + * @transfer_buffer_length: How big is transfer_buffer. The transfer may + * be broken up into chunks according to the current maximum packet + * size for the endpoint, which is a function of the configuration + * and is encoded in the pipe. When the length is zero, neither + * transfer_buffer nor transfer_dma is used. + * @actual_length: This is read in non-iso completion functions, and + * it tells how many bytes (out of transfer_buffer_length) were + * transferred. It will normally be the same as requested, unless + * either an error was reported or a short read was performed. + * The URB_SHORT_NOT_OK transfer flag may be used to make such + * short reads be reported as errors. + * @setup_packet: Only used for control transfers, this points to eight bytes + * of setup data. Control transfers always start by sending this data + * to the device. Then transfer_buffer is read or written, if needed. + * @setup_dma: DMA pointer for the setup packet. The caller must not use + * this field; setup_packet must point to a valid buffer. + * @start_frame: Returns the initial frame for isochronous transfers. + * @number_of_packets: Lists the number of ISO transfer buffers. + * @interval: Specifies the polling interval for interrupt or isochronous + * transfers. The units are frames (milliseconds) for full and low + * speed devices, and microframes (1/8 millisecond) for highspeed + * and SuperSpeed devices. + * @error_count: Returns the number of ISO transfers that reported errors. + * @context: For use in completion functions. This normally points to + * request-specific driver context. + * @complete: Completion handler. This URB is passed as the parameter to the + * completion function. The completion function may then do what + * it likes with the URB, including resubmitting or freeing it. + * @iso_frame_desc: Used to provide arrays of ISO transfer buffers and to + * collect the transfer status for each buffer. + * + * This structure identifies USB transfer requests. URBs must be allocated by + * calling usb_alloc_urb() and freed with a call to usb_free_urb(). + * Initialization may be done using various usb_fill_*_urb() functions. URBs + * are submitted using usb_submit_urb(), and pending requests may be canceled + * using usb_unlink_urb() or usb_kill_urb(). + * + * Data Transfer Buffers: + * + * Normally drivers provide I/O buffers allocated with kmalloc() or otherwise + * taken from the general page pool. That is provided by transfer_buffer + * (control requests also use setup_packet), and host controller drivers + * perform a dma mapping (and unmapping) for each buffer transferred. Those + * mapping operations can be expensive on some platforms (perhaps using a dma + * bounce buffer or talking to an IOMMU), + * although they're cheap on commodity x86 and ppc hardware. + * + * Alternatively, drivers may pass the URB_NO_TRANSFER_DMA_MAP transfer flag, + * which tells the host controller driver that no such mapping is needed for + * the transfer_buffer since + * the device driver is DMA-aware. For example, a device driver might + * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map(). + * When this transfer flag is provided, host controller drivers will + * attempt to use the dma address found in the transfer_dma + * field rather than determining a dma address themselves. + * + * Note that transfer_buffer must still be set if the controller + * does not support DMA (as indicated by bus.uses_dma) and when talking + * to root hub. If you have to trasfer between highmem zone and the device + * on such controller, create a bounce buffer or bail out with an error. + * If transfer_buffer cannot be set (is in highmem) and the controller is DMA + * capable, assign NULL to it, so that usbmon knows not to use the value. + * The setup_packet must always be set, so it cannot be located in highmem. + * + * Initialization: + * + * All URBs submitted must initialize the dev, pipe, transfer_flags (may be + * zero), and complete fields. All URBs must also initialize + * transfer_buffer and transfer_buffer_length. They may provide the + * URB_SHORT_NOT_OK transfer flag, indicating that short reads are + * to be treated as errors; that flag is invalid for write requests. + * + * Bulk URBs may + * use the URB_ZERO_PACKET transfer flag, indicating that bulk OUT transfers + * should always terminate with a short packet, even if it means adding an + * extra zero length packet. + * + * Control URBs must provide a valid pointer in the setup_packet field. + * Unlike the transfer_buffer, the setup_packet may not be mapped for DMA + * beforehand. + * + * Interrupt URBs must provide an interval, saying how often (in milliseconds + * or, for highspeed devices, 125 microsecond units) + * to poll for transfers. After the URB has been submitted, the interval + * field reflects how the transfer was actually scheduled. + * The polling interval may be more frequent than requested. + * For example, some controllers have a maximum interval of 32 milliseconds, + * while others support intervals of up to 1024 milliseconds. + * Isochronous URBs also have transfer intervals. (Note that for isochronous + * endpoints, as well as high speed interrupt endpoints, the encoding of + * the transfer interval in the endpoint descriptor is logarithmic. + * Device drivers must convert that value to linear units themselves.) + * + * If an isochronous endpoint queue isn't already running, the host + * controller will schedule a new URB to start as soon as bandwidth + * utilization allows. If the queue is running then a new URB will be + * scheduled to start in the first transfer slot following the end of the + * preceding URB, if that slot has not already expired. If the slot has + * expired (which can happen when IRQ delivery is delayed for a long time), + * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag + * is clear then the URB will be scheduled to start in the expired slot, + * implying that some of its packets will not be transferred; if the flag + * is set then the URB will be scheduled in the first unexpired slot, + * breaking the queue's synchronization. Upon URB completion, the + * start_frame field will be set to the (micro)frame number in which the + * transfer was scheduled. Ranges for frame counter values are HC-specific + * and can go from as low as 256 to as high as 65536 frames. + * + * Isochronous URBs have a different data transfer model, in part because + * the quality of service is only "best effort". Callers provide specially + * allocated URBs, with number_of_packets worth of iso_frame_desc structures + * at the end. Each such packet is an individual ISO transfer. Isochronous + * URBs are normally queued, submitted by drivers to arrange that + * transfers are at least double buffered, and then explicitly resubmitted + * in completion handlers, so + * that data (such as audio or video) streams at as constant a rate as the + * host controller scheduler can support. + * + * Completion Callbacks: + * + * The completion callback is made in_interrupt(), and one of the first + * things that a completion handler should do is check the status field. + * The status field is provided for all URBs. It is used to report + * unlinked URBs, and status for all non-ISO transfers. It should not + * be examined before the URB is returned to the completion handler. + * + * The context field is normally used to link URBs back to the relevant + * driver or request state. + * + * When the completion callback is invoked for non-isochronous URBs, the + * actual_length field tells how many bytes were transferred. This field + * is updated even when the URB terminated with an error or was unlinked. + * + * ISO transfer status is reported in the status and actual_length fields + * of the iso_frame_desc array, and the number of errors is reported in + * error_count. Completion callbacks for ISO transfers will normally + * (re)submit URBs to ensure a constant transfer rate. + * + * Note that even fields marked "public" should not be touched by the driver + * when the urb is owned by the hcd, that is, since the call to + * usb_submit_urb() till the entry into the completion routine. + */ +struct urb { +#ifndef __UBOOT__ + /* private: usb core and host controller only fields in the urb */ + struct kref kref; /* reference count of the URB */ +#endif + void *hcpriv; /* private data for host controller */ +#ifndef __UBOOT__ + atomic_t use_count; /* concurrent submissions counter */ + atomic_t reject; /* submissions will fail */ +#endif + int unlinked; /* unlink error code */ + + /* public: documented fields in the urb that can be used by drivers */ + struct list_head urb_list; /* list head for use by the urb's + * current owner */ + struct list_head anchor_list; /* the URB may be anchored */ + + struct usb_anchor *anchor; + struct usb_device *dev; /* (in) pointer to associated device */ + struct usb_host_endpoint *ep; /* (internal) pointer to endpoint */ + unsigned int pipe; /* (in) pipe information */ + unsigned int stream_id; /* (in) stream ID */ + int status; /* (return) non-ISO status */ + unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/ + void *transfer_buffer; /* (in) associated data buffer */ + dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */ +#ifndef __UBOOT__ + struct scatterlist *sg; /* (in) scatter gather buffer list */ +#endif + int num_mapped_sgs; /* (internal) mapped sg entries */ + int num_sgs; /* (in) number of entries in the sg list */ + u32 transfer_buffer_length; /* (in) data buffer length */ + u32 actual_length; /* (return) actual transfer length */ + unsigned char *setup_packet; /* (in) setup packet (control only) */ +#ifndef __UBOOT__ + dma_addr_t setup_dma; /* (in) dma addr for setup_packet */ +#endif + int start_frame; /* (modify) start frame (ISO) */ + int number_of_packets; /* (in) number of ISO packets */ + int interval; /* (modify) transfer interval + * (INT/ISO) */ + int error_count; /* (return) number of ISO errors */ + void *context; /* (in) context for completion */ + usb_complete_t complete; /* (in) completion routine */ + struct usb_iso_packet_descriptor iso_frame_desc[0]; + /* (in) ISO ONLY */ +}; + +/* ----------------------------------------------------------------------- */ + +/** + * usb_fill_control_urb - initializes a control urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @setup_packet: pointer to the setup_packet buffer + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete_fn: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * + * Initializes a control urb with the proper information needed to submit + * it to a device. + */ +static inline void usb_fill_control_urb(struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + unsigned char *setup_packet, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete_fn, + void *context) +{ + urb->dev = dev; + urb->pipe = pipe; + urb->setup_packet = setup_packet; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete_fn; + urb->context = context; +} + +/** + * usb_fill_bulk_urb - macro to help initialize a bulk urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete_fn: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * + * Initializes a bulk urb with the proper information needed to submit it + * to a device. + */ +static inline void usb_fill_bulk_urb(struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete_fn, + void *context) +{ + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete_fn; + urb->context = context; +} + +/** + * usb_fill_int_urb - macro to help initialize a interrupt urb + * @urb: pointer to the urb to initialize. + * @dev: pointer to the struct usb_device for this urb. + * @pipe: the endpoint pipe + * @transfer_buffer: pointer to the transfer buffer + * @buffer_length: length of the transfer buffer + * @complete_fn: pointer to the usb_complete_t function + * @context: what to set the urb context to. + * @interval: what to set the urb interval to, encoded like + * the endpoint descriptor's bInterval value. + * + * Initializes a interrupt urb with the proper information needed to submit + * it to a device. + * + * Note that High Speed and SuperSpeed interrupt endpoints use a logarithmic + * encoding of the endpoint interval, and express polling intervals in + * microframes (eight per millisecond) rather than in frames (one per + * millisecond). + * + * Wireless USB also uses the logarithmic encoding, but specifies it in units of + * 128us instead of 125us. For Wireless USB devices, the interval is passed + * through to the host controller, rather than being translated into microframe + * units. + */ +static inline void usb_fill_int_urb(struct urb *urb, + struct usb_device *dev, + unsigned int pipe, + void *transfer_buffer, + int buffer_length, + usb_complete_t complete_fn, + void *context, + int interval) +{ + urb->dev = dev; + urb->pipe = pipe; + urb->transfer_buffer = transfer_buffer; + urb->transfer_buffer_length = buffer_length; + urb->complete = complete_fn; + urb->context = context; + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) + urb->interval = 1 << (interval - 1); + else + urb->interval = interval; + urb->start_frame = -1; +} + +extern void usb_init_urb(struct urb *urb); +extern struct urb *usb_alloc_urb(int iso_packets, gfp_t mem_flags); +extern void usb_free_urb(struct urb *urb); +#define usb_put_urb usb_free_urb +extern struct urb *usb_get_urb(struct urb *urb); +extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); +extern int usb_unlink_urb(struct urb *urb); +extern void usb_kill_urb(struct urb *urb); +extern void usb_poison_urb(struct urb *urb); +extern void usb_unpoison_urb(struct urb *urb); +extern void usb_block_urb(struct urb *urb); +extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); +extern void usb_poison_anchored_urbs(struct usb_anchor *anchor); +extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor); +extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); +extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); +extern void usb_unanchor_urb(struct urb *urb); +extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, + unsigned int timeout); +extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor); +extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor); +extern int usb_anchor_empty(struct usb_anchor *anchor); + +#define usb_unblock_urb usb_unpoison_urb + +/** + * usb_urb_dir_in - check if an URB describes an IN transfer + * @urb: URB to be checked + * + * Returns 1 if @urb describes an IN transfer (device-to-host), + * otherwise 0. + */ +static inline int usb_urb_dir_in(struct urb *urb) +{ + return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_IN; +} + +/** + * usb_urb_dir_out - check if an URB describes an OUT transfer + * @urb: URB to be checked + * + * Returns 1 if @urb describes an OUT transfer (host-to-device), + * otherwise 0. + */ +static inline int usb_urb_dir_out(struct urb *urb) +{ + return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT; +} + +void *usb_alloc_coherent(struct usb_device *dev, size_t size, + gfp_t mem_flags, dma_addr_t *dma); +void usb_free_coherent(struct usb_device *dev, size_t size, + void *addr, dma_addr_t dma); + +#if 0 +struct urb *usb_buffer_map(struct urb *urb); +void usb_buffer_dmasync(struct urb *urb); +void usb_buffer_unmap(struct urb *urb); +#endif + +struct scatterlist; +int usb_buffer_map_sg(const struct usb_device *dev, int is_in, + struct scatterlist *sg, int nents); +#if 0 +void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, + struct scatterlist *sg, int n_hw_ents); +#endif +void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, + struct scatterlist *sg, int n_hw_ents); + +/*-------------------------------------------------------------------* + * SYNCHRONOUS CALL SUPPORT * + *-------------------------------------------------------------------*/ +#ifndef __UBOOT__ +extern int usb_control_msg(struct usb_device *dev, unsigned int pipe, + __u8 request, __u8 requesttype, __u16 value, __u16 index, + void *data, __u16 size, int timeout); +extern int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, + void *data, int len, int *actual_length, int timeout); +extern int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, + void *data, int len, int *actual_length, + int timeout); + + +/* wrappers around usb_control_msg() for the most common standard requests */ +extern int usb_get_descriptor(struct usb_device *dev, unsigned char desctype, + unsigned char descindex, void *buf, int size); +extern int usb_get_status(struct usb_device *dev, + int type, int target, void *data); +extern int usb_string(struct usb_device *dev, int index, + char *buf, size_t size); + +/* wrappers that also update important state inside usbcore */ +extern int usb_clear_halt(struct usb_device *dev, int pipe); +extern int usb_reset_configuration(struct usb_device *dev); +extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); + +/* this request isn't really synchronous, but it belongs with the others */ +extern int usb_driver_set_configuration(struct usb_device *udev, int config); +#endif +/* + * timeouts, in milliseconds, used for sending/receiving control messages + * they typically complete within a few frames (msec) after they're issued + * USB identifies 5 second timeouts, maybe more in a few cases, and a few + * slow devices (like some MGE Ellipse UPSes) actually push that limit. + */ +#define USB_CTRL_GET_TIMEOUT 5000 +#define USB_CTRL_SET_TIMEOUT 5000 + + +/** + * struct usb_sg_request - support for scatter/gather I/O + * @status: zero indicates success, else negative errno + * @bytes: counts bytes transferred. + * + * These requests are initialized using usb_sg_init(), and then are used + * as request handles passed to usb_sg_wait() or usb_sg_cancel(). Most + * members of the request object aren't for driver access. + * + * The status and bytecount values are valid only after usb_sg_wait() + * returns. If the status is zero, then the bytecount matches the total + * from the request. + * + * After an error completion, drivers may need to clear a halt condition + * on the endpoint. + */ +struct usb_sg_request { + int status; + size_t bytes; + + /* private: + * members below are private to usbcore, + * and are not provided for driver access! + */ + spinlock_t lock; + + struct usb_device *dev; + int pipe; + + int entries; + struct urb **urbs; + + int count; +#ifndef __UBOOT__ + struct completion complete; +#endif +}; + +int usb_sg_init( + struct usb_sg_request *io, + struct usb_device *dev, + unsigned pipe, + unsigned period, + struct scatterlist *sg, + int nents, + size_t length, + gfp_t mem_flags +); +void usb_sg_cancel(struct usb_sg_request *io); +void usb_sg_wait(struct usb_sg_request *io); + + +/* ----------------------------------------------------------------------- */ + +/* + * For various legacy reasons, Linux has a small cookie that's paired with + * a struct usb_device to identify an endpoint queue. Queue characteristics + * are defined by the endpoint's descriptor. This cookie is called a "pipe", + * an unsigned int encoded as: + * + * - direction: bit 7 (0 = Host-to-Device [Out], + * 1 = Device-to-Host [In] ... + * like endpoint bEndpointAddress) + * - device address: bits 8-14 ... bit positions known to uhci-hcd + * - endpoint: bits 15-18 ... bit positions known to uhci-hcd + * - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt, + * 10 = control, 11 = bulk) + * + * Given the device address and endpoint descriptor, pipes are redundant. + */ + +/* NOTE: these are not the standard USB_ENDPOINT_XFER_* values!! */ +/* (yet ... they're the values used by usbfs) */ +#define PIPE_ISOCHRONOUS 0 +#define PIPE_INTERRUPT 1 +#define PIPE_CONTROL 2 +#define PIPE_BULK 3 + +#define usb_pipein(pipe) ((pipe) & USB_DIR_IN) +#define usb_pipeout(pipe) (!usb_pipein(pipe)) + +#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f) +#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf) + +#define usb_pipetype(pipe) (((pipe) >> 30) & 3) +#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS) +#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT) +#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) +#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) + +static inline unsigned int __create_pipe(struct usb_device *dev, + unsigned int endpoint) +{ + return (dev->devnum << 8) | (endpoint << 15); +} + +/* Create various pipes... */ +#define usb_sndctrlpipe(dev, endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint)) +#define usb_rcvctrlpipe(dev, endpoint) \ + ((PIPE_CONTROL << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN) +#define usb_sndisocpipe(dev, endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint)) +#define usb_rcvisocpipe(dev, endpoint) \ + ((PIPE_ISOCHRONOUS << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN) +#define usb_sndbulkpipe(dev, endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev, endpoint)) +#define usb_rcvbulkpipe(dev, endpoint) \ + ((PIPE_BULK << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN) +#define usb_sndintpipe(dev, endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint)) +#define usb_rcvintpipe(dev, endpoint) \ + ((PIPE_INTERRUPT << 30) | __create_pipe(dev, endpoint) | USB_DIR_IN) + +static inline struct usb_host_endpoint * +usb_pipe_endpoint(struct usb_device *dev, unsigned int pipe) +{ + struct usb_host_endpoint **eps; + eps = usb_pipein(pipe) ? dev->ep_in : dev->ep_out; + return eps[usb_pipeendpoint(pipe)]; +} + +/*-------------------------------------------------------------------------*/ +#ifndef __UBOOT__ +static inline __u16 +usb_maxpacket(struct usb_device *udev, int pipe, int is_out) +{ + struct usb_host_endpoint *ep; + unsigned epnum = usb_pipeendpoint(pipe); + + if (is_out) { +#ifndef __UBOOT__ + /* Fix this warning */ + WARN_ON(usb_pipein(pipe)); +#endif + ep = udev->ep_out[epnum]; + } else { +#ifndef __UBOOT__ + /* Fix this warning */ + WARN_ON(usb_pipeout(pipe)); +#endif + ep = udev->ep_in[epnum]; + } + if (!ep) + return 0; + + /* NOTE: only 0x07ff bits are for packet size... */ + return usb_endpoint_maxp(&ep->desc); +} +#endif +/* ----------------------------------------------------------------------- */ + +/* translate USB error codes to codes user space understands */ +static inline int usb_translate_errors(int error_code) +{ + switch (error_code) { + case 0: + case -ENOMEM: + case -ENODEV: + case -EOPNOTSUPP: + return error_code; + default: + return -EIO; + } +} + +/* Events from the usb core */ +#define USB_DEVICE_ADD 0x0001 +#define USB_DEVICE_REMOVE 0x0002 +#define USB_BUS_ADD 0x0003 +#define USB_BUS_REMOVE 0x0004 +extern void usb_register_notify(struct notifier_block *nb); +extern void usb_unregister_notify(struct notifier_block *nb); + +/* debugfs stuff */ +extern struct dentry *usb_debug_root; + +#ifdef __UBOOT__ +/* device request (setup) */ +struct devrequest { + unsigned char requesttype; + unsigned char request; + unsigned short value; + unsigned short index; + unsigned short length; +} __attribute__ ((packed)); + +#endif + +#endif diff --git a/include/linux/usb/usb-mod-devicetable.h b/include/linux/usb/usb-mod-devicetable.h new file mode 100644 index 0000000..c90691c --- /dev/null +++ b/include/linux/usb/usb-mod-devicetable.h @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2013 + * Texas Instruments Incorporated. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Note: This part of code has been derived from linux source mod_devicetable.h + * + */ + +#ifndef LINUX_MOD_DEVICETABLE_H +#define LINUX_MOD_DEVICETABLE_H + +#define __UBOOT__ +/** + * struct usb_device_id - identifies USB devices for probing and hotplugging + * @match_flags: Bit mask controlling of the other fields are used to match + * against new devices. Any field except for driver_info may be used, + * although some only make sense in conjunction with other fields. + * This is usually set by a USB_DEVICE_*() macro, which sets all + * other fields in this structure except for driver_info. + * @idVendor: USB vendor ID for a device; numbers are assigned + * by the USB forum to its members. + * @idProduct: Vendor-assigned product ID. + * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers. + * This is also used to identify individual product versions, for + * a range consisting of a single device. + * @bcdDevice_hi: High end of version number range. The range of product + * versions is inclusive. + * @bDeviceClass: Class of device; numbers are assigned + * by the USB forum. Products may choose to implement classes, + * or be vendor-specific. Device classes specify behavior of all + * the interfaces on a devices. + * @bDeviceSubClass: Subclass of device; associated with bDeviceClass. + * @bDeviceProtocol: Protocol of device; associated with bDeviceClass. + * @bInterfaceClass: Class of interface; numbers are assigned + * by the USB forum. Products may choose to implement classes, + * or be vendor-specific. Interface classes specify behavior only + * of a given interface; other interfaces may support other classes. + * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. + * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. + * @bInterfaceNumber: Number of interface; composite devices may use + * fixed interface numbers to differentiate between vendor-specific + * interfaces. + * @driver_info: Holds information used by the driver. Usually it holds + * a pointer to a descriptor understood by the driver, or perhaps + * device flags. + * + * In most cases, drivers will create a table of device IDs by using + * USB_DEVICE(), or similar macros designed for that purpose. + * They will then export it to userspace using MODULE_DEVICE_TABLE(), + * and provide it to the USB core through their usb_driver structure. + * + * See the usb_match_id() function for information about how matches are + * performed. Briefly, you will normally use one of several macros to help + * construct these entries. Each entry you provide will either identify + * one or more specific products, or will identify a class of products + * which have agreed to behave the same. You should put the more specific + * matches towards the beginning of your table, so that driver_info can + * record quirks of specific products. + */ +struct usb_device_id { + /* which fields to match against? */ + __u16 match_flags; + + /* Used for product specific matches; range is inclusive */ + __u16 idVendor; + __u16 idProduct; + __u16 bcdDevice_lo; + __u16 bcdDevice_hi; + + /* Used for device class matches */ + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + + /* Used for interface class matches */ + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + + /* Used for vendor-specific interface matches */ + __u8 bInterfaceNumber; +#ifndef __UBOOT__ + /* not matched against */ + kernel_ulong_t driver_info + __attribute__((aligned(sizeof(kernel_ulong_t)))); +#endif +}; + +/* Some useful macros to use to create struct usb_device_id */ +#define USB_DEVICE_ID_MATCH_VENDOR 0x0001 +#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 +#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 +#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 +#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 +#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 +#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 +#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 +#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 +#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 +#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 + +#define HID_ANY_ID (~0) +#define HID_BUS_ANY 0xffff +#define HID_GROUP_ANY 0x0000 + +struct hid_device_id { + __u16 bus; + __u16 group; + __u32 vendor; + __u32 product; +#ifndef __UBOOT__ + kernel_ulong_t driver_data; +#endif +}; + +#endif /* LINUX_MOD_DEVICETABLE_H */ diff --git a/include/usb.h b/include/usb.h index d7b082d..0598972 100644 --- a/include/usb.h +++ b/include/usb.h @@ -28,6 +28,7 @@

#include <usb_defs.h> #include <linux/usb/ch9.h> +#include <linux/usb/usb-compat.h>

/* * The EHCI spec says that we must align to at least 32 bytes. However, @@ -45,9 +46,7 @@

#define USB_MAX_DEVICE 32 #define USB_MAXCONFIG 8 -#define USB_MAXINTERFACES 8 #define USB_MAXENDPOINTS 16 -#define USB_MAXCHILDREN 8 /* This is arbitrary */ #define USB_MAX_HUB 16

#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */ @@ -58,92 +57,6 @@ */ #define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000)

-/* device request (setup) */ -struct devrequest { - unsigned char requesttype; - unsigned char request; - unsigned short value; - unsigned short index; - unsigned short length; -} __attribute__ ((packed)); - -/* Interface */ -struct usb_interface { - struct usb_interface_descriptor desc; - - unsigned char no_of_ep; - unsigned char num_altsetting; - unsigned char act_altsetting; - - struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; - /* - * Super Speed Device will have Super Speed Endpoint - * Companion Descriptor (section 9.6.7 of usb 3.0 spec) - * Revision 1.0 June 6th 2011 - */ - struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; -} __attribute__ ((packed)); - -/* Configuration information.. */ -struct usb_config { - struct usb_config_descriptor desc; - - unsigned char no_of_if; /* number of interfaces */ - struct usb_interface if_desc[USB_MAXINTERFACES]; -} __attribute__ ((packed)); - -enum { - /* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */ - PACKET_SIZE_8 = 0, - PACKET_SIZE_16 = 1, - PACKET_SIZE_32 = 2, - PACKET_SIZE_64 = 3, -}; - -struct usb_device { - int devnum; /* Device number on USB bus */ - int speed; /* full/low/high */ - char mf[32]; /* manufacturer */ - char prod[32]; /* product */ - char serial[32]; /* serial number */ - - /* Maximum packet size; one of: PACKET_SIZE_* */ - int maxpacketsize; - /* one bit for each endpoint ([0] = IN, [1] = OUT) */ - unsigned int toggle[2]; - /* endpoint halts; one bit per endpoint # & direction; - * [0] = IN, [1] = OUT - */ - unsigned int halted[2]; - int epmaxpacketin[16]; /* INput endpoint specific maximums */ - int epmaxpacketout[16]; /* OUTput endpoint specific maximums */ - - int configno; /* selected config number */ - /* Device Descriptor */ - struct usb_device_descriptor descriptor - __attribute__((aligned(ARCH_DMA_MINALIGN))); - struct usb_config config; /* config descriptor */ - - int have_langid; /* whether string_langid is valid yet */ - int string_langid; /* language ID for strings */ - int (*irq_handle)(struct usb_device *dev); - unsigned long irq_status; - int irq_act_len; /* transfered bytes */ - void *privptr; - /* - * Child devices - if this is a hub device - * Each instance needs its own set of data structures. - */ - unsigned long status; - int act_len; /* transfered bytes */ - int maxchild; /* Number of ports if hub */ - int portnr; - struct usb_device *parent; - struct usb_device *children[USB_MAXCHILDREN]; - - void *controller; /* hardware controller private data */ -}; - /********************************************************************** * this is how the lowlevel part communicate with the outer world */ @@ -155,7 +68,7 @@ struct usb_device { defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \ defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \ defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS) + defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_DWC3)

int usb_lowlevel_init(int index, void **controller); int usb_lowlevel_stop(int index); @@ -226,7 +139,6 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); int usb_disable_asynch(int disable); -int usb_maxpacket(struct usb_device *dev, unsigned long pipe); int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, int cfgno); int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, @@ -295,32 +207,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); * specification, so that much of the uhci driver can just mask the bits * appropriately. */ -/* Create various pipes... */ -#define create_pipe(dev,endpoint) \ - (((dev)->devnum << 8) | ((endpoint) << 15) | \ - (dev)->maxpacketsize) #define default_pipe(dev) ((dev)->speed << 26) - -#define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ - create_pipe(dev, endpoint)) -#define usb_rcvctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \ - create_pipe(dev, endpoint) | \ - USB_DIR_IN) -#define usb_sndisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ - create_pipe(dev, endpoint)) -#define usb_rcvisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \ - create_pipe(dev, endpoint) | \ - USB_DIR_IN) -#define usb_sndbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ - create_pipe(dev, endpoint)) -#define usb_rcvbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \ - create_pipe(dev, endpoint) | \ - USB_DIR_IN) -#define usb_sndintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ - create_pipe(dev, endpoint)) -#define usb_rcvintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \ - create_pipe(dev, endpoint) | \ - USB_DIR_IN) #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | \ default_pipe(dev)) #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | \ @@ -343,8 +230,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate); #define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : \ USB_PID_OUT)

-#define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1) -#define usb_pipein(pipe) (((pipe) >> 7) & 1) #define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f) #define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff) #define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf) diff --git a/include/usb/lin_gadget_compat.h b/include/usb/lin_gadget_compat.h index 5bdcb8d..93305e0 100644 --- a/include/usb/lin_gadget_compat.h +++ b/include/usb/lin_gadget_compat.h @@ -24,34 +24,7 @@ #define __LIN_COMPAT_H__

#include <linux/compat.h> - -/* common */ -#define spin_lock_init(...) -#define spin_lock(...) -#define spin_lock_irqsave(lock, flags) do { debug("%lu\n", flags); } while (0) -#define spin_unlock(...) -#define spin_unlock_irqrestore(lock, flags) do {flags = 0; } while (0) -#define disable_irq(...) -#define enable_irq(...) - -#define mutex_init(...) -#define mutex_lock(...) -#define mutex_unlock(...) - -#define GFP_KERNEL 0 - -#define IRQ_HANDLED 1 - -#define ENOTSUPP 524 /* Operation is not supported */ - -#define BITS_PER_BYTE 8 -#define BITS_TO_LONGS(nr) \ - DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long)) -#define DECLARE_BITMAP(name, bits) \ - unsigned long name[BITS_TO_LONGS(bits)] - -#define small_const_nbits(nbits) \ - (__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG) +#include <linux/usb/linux-compat.h>

static inline void bitmap_zero(unsigned long *dst, int nbits) {