Wierd O wrote:
Hi all,
I was working on freescale imx27ads board. Uboot hangs on ' starting kernel...'
I would be grateful if you can shed a light on the problem.
I used gcc-3.4.3 for cross compiling the image.
Here is the log:
U-Boot 2.0.0-rc3 (Mar 23 2009 - 13:30:42)
Board: Freescale i.MX27 phy0: Autonegotiation timeout phy0: Phyid 1: 7 Phyid 2: c0c4 LPA 1 phy0: Link is down - 10/Half
MPLL: 398 MHz, SPLL: 239 MHz, ARM: 265 MHz, AHB: 132 MHz, IPG: 66 MHz perclk1: 53199918 Hz perclk2: 265999593 Hz perclk3: 53199918 Hz perclk4: 265999593 Hz clkin26: 26000000 Hz Malloc Space: 0xa3b00000 -> 0xa3f00000 (size 4 MB) running /env/bin/init...
Hit any key to stop autoboot: 0 Verifying Checksum ... OK Image Name: Linux-2.6.22.6 Created: 2009-12-08 14:52:27 UTC Data Size: 1564480 Bytes = 1.5 MB Load Address: a0008000 Entry Point: a0008000 OK commandline: console=ttymxc0,115200 mem=64M mtdparts=uboot:1M(boot),-(root) root=/dev/mmcblk0p1 rootdelay=1 rootfstype=ext2 video=mxcfb:800x600,bpp=16,OSD080TN4x
Starting kernel ...
Please read the documentation. Are you sure "console=ttymxc0" is correct?
regards, Ben