On 05.12.2020 12:02, Eugen Hristev wrote:
Hello,
This series adds support for sama7g5 SoC DT and the sama7g5ek board. I kept the original incremental development for this board, with each commit's author and designated change, for traceability and for easier reviewing.
The series starts from a basic devicetree and ends with a fully functional board including SD-Card/MMC, i2c eeproms, ethernet.
Thanks, Eugen
Changes in v2:
- fixed compatible for i2c eeprom, mac was not read correctly in latest u-boot version
- fixed some checkpatch warnings and some spacing
Claudiu Beznea (20): board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR configs: sama7g5ek: set malloc pool to 68K configs: sama7g5ek: enable pll driver ARM: dts: sama7g5: move clock frequencies for xtals in board file ARM: dts: sama7g5: add slow rc and main rc oscillators ARM: dts: sama7g5: add u-boot,dm-pre-reloc bindings for xtals ARM: dts: sama7g5: add slow clock bindings ARM: dts: sama7g5: add PMC bindings ARM: dts: sama7g5: switch to PMC bindings configs: sama7g5: enable CONFIG_CPU ARM: dts: sama7g5: add CPU bindings configs: sama7g5: use PIT64B ARM: dts: sama7g5: enable autoboot ARM: dts: sama7g5: add pit64b support configs: sama7g5ek: enable mii command ARM: dts: sama7g5: add GMAC0 ARM: dts: sama7g5: add GMAC1 board: atmel: sama7g5ek: increase arp timeout and retry count configs: sama7g5ek: enable support for KSZ9131 configs: sama7g5ek: enable CCF
Eugen Hristev (13): ARM: dts: sama7g5: add initial DT for sama7g5 SoC board: atmel: sama7g5ek: add initial support for sama7g5ek ARM: dts: at91: sama7g5: add pinctrl node ARM: dts: at91: sama7g5ek: add pinctrl for sdmmc1 and flx3 ARM: dts: at91: sama7g5: add assigned clocks for sdmmc1 ARM: dts: at91: sama7g5: add node for sdmmc0 ARM: dts: at91: sama7g5ek: enable sdmmc0 with pinctrl board: atmel: sama7g5ek: clean-up header bootcommand configs: sama7g5: add mmc config for sdmmc0 ARM: dts: at91: sama7g5: add flexcom1 and i2c subnode ARM: dts: sama7g5ek: add i2c1 bus and eeproms board: atmel: sama7g5ek: add support for MAC address retreival configs: sama7g5ek: add i2c and eeprom
Nicolas Ferre (1): ARM: dts: sama7g5ek: fix TXC pin configuration
arch/arm/dts/Makefile | 3 + arch/arm/dts/sama7g5.dtsi | 170 ++++++++++++++++++++++++ arch/arm/dts/sama7g5ek-u-boot.dtsi | 65 ++++++++++ arch/arm/dts/sama7g5ek.dts | 202 +++++++++++++++++++++++++++++ arch/arm/mach-at91/Kconfig | 8 ++ board/atmel/sama7g5ek/Kconfig | 15 +++ board/atmel/sama7g5ek/MAINTAINERS | 8 ++ board/atmel/sama7g5ek/Makefile | 7 + board/atmel/sama7g5ek/sama7g5ek.c | 76 +++++++++++ configs/sama7g5ek_mmc1_defconfig | 70 ++++++++++ configs/sama7g5ek_mmc_defconfig | 70 ++++++++++ include/configs/sama7g5ek.h | 45 +++++++ 12 files changed, 739 insertions(+) create mode 100644 arch/arm/dts/sama7g5.dtsi create mode 100644 arch/arm/dts/sama7g5ek-u-boot.dtsi create mode 100644 arch/arm/dts/sama7g5ek.dts create mode 100644 board/atmel/sama7g5ek/Kconfig create mode 100644 board/atmel/sama7g5ek/MAINTAINERS create mode 100644 board/atmel/sama7g5ek/Makefile create mode 100644 board/atmel/sama7g5ek/sama7g5ek.c create mode 100644 configs/sama7g5ek_mmc1_defconfig create mode 100644 configs/sama7g5ek_mmc_defconfig create mode 100644 include/configs/sama7g5ek.h
Applied to u-boot-atmel/master