For board revisions where the WAN ethernet PHY reset GPIO is controllable via MCU we currently insert a phy-reset-gpios property into the ethernet controller node. The mvneta driver parses this property and uses the GPIO to reset the PHY.
But this phy-reset-gpios property is not a valid DT binding in upstream kernel. Instead, a reset-gpios property should be inserted into the ethernet PHY node. This correct DT binding is supported by the DM ETH PHY U-Boot driver.
Insert the reset-gpios property into the WAN PHY node instead the phy-reset-gpios property in WAN ETH node so that Linux will correctly use the reset GPIO.
Enable the CONFIG_DM_ETH_PHY config option so that U-Boot will also use the correct DT property.
Note: currently there are 4 ethernet controller drivers parsing the wrong DT property: dwc_eth_qos, fex_mxc, mvneta and mvpp2. We should convert all relevant device-trees to use reset-gpios so that we can get rid of these drivers parsing this property.
Fixes: 1da53ae26afc ("arm: mvebu: turris_omnia: Add support for design with SW reset signals") Signed-off-by: Marek Behún kabel@kernel.org --- board/CZ.NIC/turris_omnia/turris_omnia.c | 44 ++++++++++++++---------- configs/turris_omnia_defconfig | 1 + 2 files changed, 26 insertions(+), 19 deletions(-)
diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index 3b7a71bdad..448655c294 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -978,11 +978,21 @@ static int fixup_mcu_gpio_in_pcie_nodes(void *blob) return 0; }
-static int fixup_mcu_gpio_in_eth_wan_node(void *blob) +static int get_phy_wan_node_offset(const void *blob) +{ + u32 phy_wan_phandle; + + phy_wan_phandle = fdt_getprop_u32_default(blob, "ethernet2", "phy-handle", 0); + if (!phy_wan_phandle) + return -FDT_ERR_NOTFOUND; + + return fdt_node_offset_by_phandle(blob, phy_wan_phandle); +} + +static int fixup_mcu_gpio_in_phy_wan_node(void *blob) { unsigned int mcu_phandle; - int eth_wan_node; - int ret; + int phy_wan_node, ret;
ret = fdt_increase_size(blob, 64); if (ret < 0) { @@ -990,21 +1000,17 @@ static int fixup_mcu_gpio_in_eth_wan_node(void *blob) return ret; }
- eth_wan_node = fdt_path_offset(blob, "ethernet2"); - if (eth_wan_node < 0) - return eth_wan_node; + phy_wan_node = get_phy_wan_node_offset(blob); + if (phy_wan_node < 0) + return phy_wan_node;
mcu_phandle = fdt_create_phandle_by_compatible(blob, "cznic,turris-omnia-mcu"); if (!mcu_phandle) return -FDT_ERR_NOPHANDLES;
- /* insert: phy-reset-gpios = <&mcu 2 gpio GPIO_ACTIVE_LOW>; */ - ret = insert_mcu_gpio_prop(blob, eth_wan_node, "phy-reset-gpios", - mcu_phandle, 2, ilog2(EXT_CTL_nRES_PHY), GPIO_ACTIVE_LOW); - if (ret < 0) - return ret; - - return 0; + /* insert: reset-gpios = <&mcu 2 gpio GPIO_ACTIVE_LOW>; */ + return insert_mcu_gpio_prop(blob, phy_wan_node, "reset-gpios", + mcu_phandle, 2, ilog2(EXT_CTL_nRES_PHY), GPIO_ACTIVE_LOW); }
static void fixup_atsha_node(void *blob) @@ -1033,7 +1039,7 @@ int board_fix_fdt(void *blob) { if (omnia_mcu_has_feature(FEAT_PERIPH_MCU)) { fixup_mcu_gpio_in_pcie_nodes(blob); - fixup_mcu_gpio_in_eth_wan_node(blob); + fixup_mcu_gpio_in_phy_wan_node(blob); }
fixup_msata_port_nodes(blob); @@ -1218,14 +1224,14 @@ int ft_board_setup(void *blob, struct bd_info *bd) int node;
/* - * U-Boot's FDT blob contains phy-reset-gpios in ethernet2 - * node when MCU controls all peripherals resets. + * U-Boot's FDT blob contains reset-gpios in ethernet2 PHY node when MCU + * controls all peripherals resets. * Fixup MCU GPIO nodes in PCIe and eth wan nodes in this case. */ - node = fdt_path_offset(gd->fdt_blob, "ethernet2"); - if (node >= 0 && fdt_getprop(gd->fdt_blob, node, "phy-reset-gpios", NULL)) { + node = get_phy_wan_node_offset(gd->fdt_blob); + if (node >= 0 && fdt_getprop(gd->fdt_blob, node, "reset-gpios", NULL)) { fixup_mcu_gpio_in_pcie_nodes(blob); - fixup_mcu_gpio_in_eth_wan_node(blob); + fixup_mcu_gpio_in_phy_wan_node(blob); }
fixup_spi_nor_partitions(blob); diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index 11256be8dd..d7005e7334 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -100,6 +100,7 @@ CONFIG_SPI_FLASH_MTD=y CONFIG_PHY_MARVELL=y CONFIG_PHY_FIXED=y CONFIG_DM_DSA=y +CONFIG_DM_ETH_PHY=y CONFIG_PHY_GIGE=y CONFIG_MV88E6XXX=y CONFIG_MVNETA=y