5 Jan
2016
5 Jan
'16
7 p.m.
Hi Eric,
On Tue, Jan 5, 2016 at 3:54 PM, Eric Nelson eric@nelint.com wrote:
The only thing I would add here is a set of constants to prevent the need to refer to the manual.
The values differ in the i.MX6SDL to allow different meanings for DDR2, so this should suffice:
#define RTT_NOM_Disabled 0 #define RTT_NOM_120_OHM_75_OHM_DDR2 1 #define RTT_NOM_60_OHM_150_OHM_DDR2 2 #define RTT_NOM_40_OHM_50_OHM_DDR2 3 #define RTT_NOM_30_OHM_37.5_OHM_DDR2 4 #define RTT_NOM_24_OHM_30_OHM_DDR2 5 #define RTT_NOM_20_OHM_25_OHM_DDR2 6 #define RTT_NOM_17_OHM_21_OHM_DDR2 7
(or an enum of the same)...
Thanks for your feedback.
Will submit such patch after 2016.01 is out.