On Friday 04 January 2008, William Juul wrote:
I'm trying to integrate your patches right now. Looks quite good so far but I'm facing some problems on a ppc4xx board with a large page NAND chip. Small page devices are fine.
Did you ever test this stuff on large page devices? Which ones?
We did run this on large page devices with 4KB page size (total size of 1/2 GB). Unfortunately the devices are/were under NDA as they are/were not officially released yet. Stig can you verify if any/both of the flashes can be named here?
Not needed anymore. I found my problem. A timeout was calculated incorrectly. I need to change nand_base.c at one place to make it work on my platform with my NAND chips. I'll post a till beginning of next week, so that you (or Stig) can test it on your platform too.
BTW: What is the platform you "normally" test on (ARM, MIPS, PPC...)?
We had two custom boards, one ARM based (926) and one PPC83xx.
I will not have access to the build environment and boards the next couple of months, but Stig Olsen is more than capable of answering questions (if he has the time :-)
Thanks.
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================