Add Kconfig entry for CMD_NANDBCB, and default y on i.MX6 platform with NAND_MXS defined.
Reviewed-by: Stefano Babic sbabic@denx.de Signed-off-by: Jagan Teki jagan@amarulasolutions.com Signed-off-by: Shyam Saini shyam.saini@amarulasolutions.com --- Hi,
This patch series is based on feedback gathered from this [1] discussion and [2] patch submitted by Stefan.
[1] https://patchwork.ozlabs.org/patch/870467/ [2] https://patchwork.ozlabs.org/patch/897222/
Changes for v5: - New patch Changes for v4: - No change Changes for v3: - Fixed Typo 'seprate' Changes for v2: - New patch arch/arm/mach-imx/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ec09ef240f..5dd286f9a7 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -71,6 +71,17 @@ config CMD_HDMIDETECT This enables the 'hdmidet' command which detects if an HDMI monitor is connected.
+config CMD_NANDBCB + bool "i.MX6 NAND Boot Control Block(BCB) command" + depends on NAND && CMD_MTDPARTS + default y if ARCH_MX6 && NAND_MXS + help + Unlike normal 'nand write/erase' commands, this command update + Boot Control Block(BCB) for i.MX6 platform NAND IP's. + + This is similar to kobs-ng, which is used in Linux as separate + rootfs package. + config NXP_BOARD_REVISION bool "Read NXP board revision from fuses" depends on ARCH_MX6 || ARCH_MX7