Factor out the regulator handling into set_ios and add support for selecting pin configuration based on the voltage to support UHS modes.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Jaehoon Chung jh80.chung@samsung.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- V2: Protect vqmmc_dev access in uniphier_sd_set_pins() with an ifdef just like everywhere else --- drivers/mmc/uniphier-sd.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/uniphier-sd.c b/drivers/mmc/uniphier-sd.c index 552e37d852..e6c610a22a 100644 --- a/drivers/mmc/uniphier-sd.c +++ b/drivers/mmc/uniphier-sd.c @@ -10,6 +10,7 @@ #include <fdtdec.h> #include <mmc.h> #include <dm.h> +#include <dm/pinctrl.h> #include <linux/compat.h> #include <linux/dma-direction.h> #include <linux/io.h> @@ -134,6 +135,9 @@ struct uniphier_sd_priv { #define UNIPHIER_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */ #define UNIPHIER_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */ #define UNIPHIER_SD_CAP_64BIT BIT(3) /* Controller is 64bit */ +#ifdef CONFIG_DM_REGULATOR + struct udevice *vqmmc_dev; +#endif };
static u64 uniphier_sd_readq(struct uniphier_sd_priv *priv, unsigned int reg) @@ -676,6 +680,26 @@ static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv, udelay(1000); }
+static void uniphier_sd_set_pins(struct udevice *dev) +{ + struct uniphier_sd_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + +#ifdef CONFIG_DM_REGULATOR + if (priv->vqmmc_dev) { + if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) + regulator_set_value(priv->vqmmc_dev, 1800000); + else + regulator_set_value(priv->vqmmc_dev, 3300000); + } +#endif + + if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) + pinctrl_select_state(dev, "state_uhs"); + else + pinctrl_select_state(dev, "default"); +} + static int uniphier_sd_set_ios(struct udevice *dev) { struct uniphier_sd_priv *priv = dev_get_priv(dev); @@ -690,6 +714,7 @@ static int uniphier_sd_set_ios(struct udevice *dev) return ret; uniphier_sd_set_ddr_mode(priv, mmc); uniphier_sd_set_clk_rate(priv, mmc); + uniphier_sd_set_pins(dev);
return 0; } @@ -757,9 +782,6 @@ static int uniphier_sd_probe(struct udevice *dev) fdt_addr_t base; struct clk clk; int ret; -#ifdef CONFIG_DM_REGULATOR - struct udevice *vqmmc_dev; -#endif
base = devfdt_get_addr(dev); if (base == FDT_ADDR_T_NONE) @@ -770,12 +792,7 @@ static int uniphier_sd_probe(struct udevice *dev) return -ENOMEM;
#ifdef CONFIG_DM_REGULATOR - ret = device_get_supply_regulator(dev, "vqmmc-supply", &vqmmc_dev); - if (!ret) { - /* Set the regulator to 3.3V until we support 1.8V modes */ - regulator_set_value(vqmmc_dev, 3300000); - regulator_set_enable(vqmmc_dev, true); - } + ret = device_get_supply_regulator(dev, "vqmmc-supply", &priv->vqmmc_dev); #endif
ret = clk_get_by_index(dev, 0, &clk);