From: Michael Walle michael.walle@kontron.com
The boot commands have changed in the environment. Add a note about the incompatible change and how resolve the issue in the board's README.
Signed-off-by: Michael Walle michael.walle@kontron.com ---
Hi Stefan,
now that the patches are in the marvell tree and I guess they'll make it into the next release. Could you apply the following patch, too?
Thanks, michael
board/buffalo/lsxl/README | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/board/buffalo/lsxl/README b/board/buffalo/lsxl/README index ef5ed42880..fffb1ce8ec 100644 --- a/board/buffalo/lsxl/README +++ b/board/buffalo/lsxl/README @@ -8,6 +8,16 @@ the LS-XHL PCB has two SDRAM chips. Both have a Kirkwood CPU (Marvell bootloader and its environment. The linux kernel and the initial ramdisk are loaded from the hard disk.
+Important! Changes since v2019.07 +--------------------------------- +In u-boot v2019.07 the driver for the SATA port was changed to a new +one. This means that the old "ide" command and block interface is not +supported anymore. More important, the boot commands have changed. You have +to overwrite the boot commands in your envionment with the new ones: + + env default -f bootcmd_legacy + env default -f bootcmd_hdd + saveenv
Rescue Mode -----------