On Wed, Jul 11, 2018 at 12:28 PM, Chen-Yu Tsai wens@csie.org wrote:
On Wed, Jul 11, 2018 at 11:53 AM, Chen-Yu Tsai wens@csie.org wrote:
On Tue, Jul 10, 2018 at 2:13 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On Tue, Jul 10, 2018 at 8:34 AM, Chen-Yu Tsai wens@csie.org wrote:
This is on a Libre Computer ALL-H3-CC H3 variant. Still running a bisect, but v2018.07-rc1 is a working version. From the EHCI error messages, I'm thinking it might be related to the USB changes lately. Not sure if any other SoCs (ex. A64) are broken or not at the moment.
I'm able to boot with BPI-M2+, where I changed the configurations based on Libre Computer board.
- remove/disable ehci0, ohci0
- enable ehci1, 2, 3 and ohci1, 2, 3
- remove/disable usb_otg node
- disable MUSB_GADGET
On BPI-M2+, with Sinovoip_BPI_M2_Plus_defconfig, cross-compiled using gcc version 7.3.0 (Debian 7.3.0-20)
OK. I dropped back to GCC 6.4.1 from Linaro's 2017.11 release. It now works. Will try Linaro's other toolchains later.
OK, I used Linaro GCC 6.3-2017.02