These pin mux settings are cared by the pinctrl driver. Remove the ad-hoc code.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c | 9 --------- arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c | 7 ------- arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c | 9 --------- 3 files changed, 25 deletions(-)
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c index 3c06b30..2fe2c7f 100644 --- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c @@ -35,15 +35,6 @@ void ph1_ld4_pin_init(void) sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ #endif
-#ifdef CONFIG_USB_EHCI - sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ -#endif - tmp = readl(SG_IECTRL); tmp |= 0x41; writel(tmp, SG_IECTRL); diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c index d5541a9..b08ca1e 100644 --- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c @@ -40,12 +40,5 @@ void ph1_pro4_pin_init(void) sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ #endif
-#ifdef CONFIG_USB_EHCI - sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ -#endif - writel(1, SG_LOADPINCTRL); } diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c index 6763584..f3fae1d 100644 --- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c @@ -32,13 +32,4 @@ void ph1_sld8_pin_init(void) sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ #endif - -#ifdef CONFIG_USB_EHCI - sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ -#endif }