From: Marcel Ziswiler marcel.ziswiler@toradex.com
An assortment of fixes and improvements like a legacy image generation fix, an Ethernet PHY configuration fix, DEK blob encapsulation preparation, migration to using binman to pack images, SLEEP_MOCI# enablement and dropping of V1.0 hardware support [1].
One last issue I am still trying to debug the root cause of. As already once mentioned back here [2] it still prints the following error message during boot:
imx_wdt watchdog@30280000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
Note that this series is applied on top of Peng's Makefile fix [3] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [4].
[1] https://developer.toradex.com/verdin-sample-phase-over [2] https://marc.info/?l=u-boot&m=161786572422973 [3] https://marc.info/?l=u-boot&m=162908373904742 [4] https://marc.info/?l=u-boot&m=162945614207220
Marcel Ziswiler (5): imx: mkimage_fit_atf: fix legacy image generation imx8m: clean-up kconfig indentation verdin-imx8mm: fix ethernet ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation verdin-imx8mm: switch to use binman to pack images
Max Krummenacher (2): verdin-imx8mm: enable sleep_moci output verdin-imx8mm: drop support for v1.0 hardware
arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 129 +++++++++++++++++++- arch/arm/dts/imx8mm-verdin.dts | 20 ++- arch/arm/mach-imx/imx8m/Kconfig | 21 ++-- arch/arm/mach-imx/mkimage_fit_atf.sh | 26 ++-- board/toradex/verdin-imx8mm/imximage.cfg | 11 +- board/toradex/verdin-imx8mm/verdin-imx8mm.c | 77 +----------- configs/verdin-imx8mm_defconfig | 3 +- doc/board/toradex/verdin-imx8mm.rst | 54 ++++---- 8 files changed, 210 insertions(+), 131 deletions(-)