[U-Boot] [PATCH 3/4] ARM: zynq: Setup modeboot variable based on boot mode

modeboot variable is used for saving inforation which bootmode is used.

Signed-off-by: Michal Simek michal.simek@xilinx.com ---

board/xilinx/zynq/board.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 5cd9bbf711f7..6a3cbe0a0dc4 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -85,6 +85,12 @@ int board_init(void) int board_late_init(void) { switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { + case ZYNQ_BM_QSPI: + setenv("modeboot", "qspiboot"); + break; + case ZYNQ_BM_NAND: + setenv("modeboot", "nandboot"); + break; case ZYNQ_BM_NOR: setenv("modeboot", "norboot"); break;