Allow platform owners to mirror devicetree files from devitree-rebasing directory into dts/arch/$(ARCH) (special case for dts/arch/arm64). Then build then along with any *-u-boot.dtsi file present in arch/$(ARCH)/dts directory.
This will help easy migration for platforms which currently are compliant with upstream Linux kernel devicetree files.
Signed-off-by: Sumit Garg sumit.garg@linaro.org --- dts/Kconfig | 11 +++++++++++ dts/Makefile | 17 ++++++++++++++--- dts/arch/arm64/Makefile | 14 ++++++++++++++ 3 files changed, 39 insertions(+), 3 deletions(-) create mode 100644 dts/arch/arm64/Makefile
diff --git a/dts/Kconfig b/dts/Kconfig index 00c0aeff893..e58c1c6f2ab 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -85,6 +85,17 @@ config OF_LIVE enables a live tree which is available after relocation, and can be adjusted as needed.
+config OF_UPSTREAM + bool "Enable use of devicetree imported from Linux kernel release" + help + Traditionally, U-Boot platforms used to have their custom devicetree + files or copy devicetree files from Linux kernel which are hard to + maintain and can usually get out-of-sync from Linux kernel. This + option enables platforms to migrate to devicetree-rebasing repo where + a regular sync will be maintained every major Linux kernel release + cycle. However, platforms can still have some custom u-boot specific + bits maintained as part of *-u-boot.dtsi files. + choice prompt "Provider of DTB for DT control" depends on OF_CONTROL diff --git a/dts/Makefile b/dts/Makefile index 3437e54033d..68daaf45ec7 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -10,10 +10,20 @@ ifeq ($(DEVICE_TREE),) DEVICE_TREE := unset endif
+ifeq ($(CONFIG_OF_UPSTREAM),y) +ifeq ($(CONFIG_ARM64),y) +dt_dir := dts/arch/arm64 +else +dt_dir := dts/arch/$(ARCH) +endif +else +dt_dir := arch/$(ARCH)/dts +endif + ifneq ($(EXT_DTB),) DTB := $(EXT_DTB) else -DTB := arch/$(ARCH)/dts/$(DEVICE_TREE).dtb +DTB := $(dt_dir)/$(DEVICE_TREE).dtb endif
$(obj)/dt-$(SPL_NAME).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE @@ -41,7 +51,7 @@ $(DTB): arch-dtbs
PHONY += arch-dtbs arch-dtbs: - $(Q)$(MAKE) $(build)=arch/$(ARCH)/dts dtbs + $(Q)$(MAKE) $(build)=$(dt_dir) dtbs
ifeq ($(CONFIG_SPL_BUILD),y) obj-$(CONFIG_OF_EMBED) := dt-spl.dtb.o @@ -65,4 +75,5 @@ clean-files := dt.dtb.S # Let clean descend into dts directories subdir- += ../arch/arc/dts ../arch/arm/dts ../arch/m68k/dts ../arch/microblaze/dts \ ../arch/mips/dts ../arch/nios2/dts ../arch/powerpc/dts ../arch/riscv/dts \ - ../arch/sandbox/dts ../arch/sh/dts ../arch/x86/dts ../arch/xtensa/dts + ../arch/sandbox/dts ../arch/sh/dts ../arch/x86/dts ../arch/xtensa/dts \ + ./arch/arm64 ./arch/$(ARCH) diff --git a/dts/arch/arm64/Makefile b/dts/arch/arm64/Makefile new file mode 100644 index 00000000000..16e9fea622d --- /dev/null +++ b/dts/arch/arm64/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0+ + +include $(srctree)/scripts/Makefile.dts + +targets += $(dtb-y) + +# Add any required device tree compiler flags here +DTC_FLAGS += -a 0x8 + +PHONY += dtbs +dtbs: $(addprefix $(obj)/, $(dtb-y)) + @: + +clean-files := */*.dtb */*.dtbo */*_HS