From: T Karthik Reddy t.karthik.reddy@xilinx.com
Add support for usb dfu & thor to distro boot on zynq platform. Add 60s timeout of dfu-utils to start transaction. Remove DFU_ALT_INFO_RAM as we use bootcmd_usb_dfu instead of dfu_ram. Remove DFU_ALT_INFO_MMC as part of distro boot cleanup.
Signed-off-by: T Karthik Reddy t.karthik.reddy@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com ---
include/configs/syzygy_hub.h | 1 - include/configs/topic_miami.h | 1 - include/configs/zynq-common.h | 61 +++++++++++++++++------------------ 3 files changed, 30 insertions(+), 33 deletions(-)
diff --git a/include/configs/syzygy_hub.h b/include/configs/syzygy_hub.h index e31b77c0c0b7..7af7b08eb485 100644 --- a/include/configs/syzygy_hub.h +++ b/include/configs/syzygy_hub.h @@ -58,7 +58,6 @@ "jtagboot=echo TFTPing FIT to RAM... && " \ "tftpboot ${load_addr} ${fit_image} && " \ "bootm ${load_addr}\0" \ - DFU_ALT_INFO \ BOOTENV
#include <configs/zynq-common.h> diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 010d28ac86f7..c12cd7ccad8f 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -49,7 +49,6 @@ "${devicetree_addr}; " \ "fi\0" /* Note that addresses here should match the addresses in the env */ -# undef DFU_ALT_INFO # define DFU_ALT_INFO \ "dfu_alt_info=" \ "uImage ram 0x2080000 0x500000;" \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 1607a8d06518..39035f8bebca 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -61,36 +61,6 @@ # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 # define DFU_DEFAULT_POLL_TIMEOUT 300 # define CONFIG_THOR_RESET_OFF -# define DFU_ALT_INFO_RAM \ - "dfu_ram_info=" \ - "setenv dfu_alt_info " \ - "${kernel_image} ram 0x3000000 0x500000\\;" \ - "${devicetree_image} ram 0x2A00000 0x20000\\;" \ - "${ramdisk_image} ram 0x2000000 0x600000\0" \ - "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ - "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" - -# if defined(CONFIG_MMC_SDHCI_ZYNQ) -# define DFU_ALT_INFO_MMC \ - "dfu_mmc_info=" \ - "setenv dfu_alt_info " \ - "${kernel_image} fat 0 1\\;" \ - "${devicetree_image} fat 0 1\\;" \ - "${ramdisk_image} fat 0 1\0" \ - "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \ - "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0" - -# define DFU_ALT_INFO \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_MMC -# else -# define DFU_ALT_INFO \ - DFU_ALT_INFO_RAM -# endif -#endif - -#if !defined(DFU_ALT_INFO) -# define DFU_ALT_INFO #endif
/* enable preboot to be loaded before CONFIG_BOOTDELAY */ @@ -180,12 +150,42 @@ #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ "jtag "
+#define BOOT_TARGET_DEVICES_USB_DFU(func) \ + func(USB_DFU, usb_dfu, 0) func(USB_DFU, usb_dfu, 1) + +#define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \ + "$scriptaddr $script_size_f && " \ + "dfu " #instance " ram " #instance " 60 && " \ + "echo DFU" #instance ": Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; " \ + "echo DFU" #instance ": SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \ + "" + +#define BOOT_TARGET_DEVICES_USB_THOR(func) \ + func(USB_THOR, usb_thor, 0) func(USB_THOR, usb_thor, 1) + +#define BOOTENV_DEV_USB_THOR(devtypeu, devtypel, instance) \ + "bootcmd_" #devtypel #instance "=setenv dfu_alt_info boot.scr ram " \ + "$scriptaddr $script_size_f && " \ + "thordown " #instance " ram " #instance " && " \ + "echo THOR" #instance ": Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; " \ + "echo THOR" #instance ": SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_USB_THOR(devtypeu, devtypel, instance) \ + "" + #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_JTAG(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_QSPI(func) \ BOOT_TARGET_DEVICES_NAND(func) \ BOOT_TARGET_DEVICES_NOR(func) \ + BOOT_TARGET_DEVICES_USB_DFU(func) \ + BOOT_TARGET_DEVICES_USB_THOR(func) \ BOOT_TARGET_DEVICES_USB(func) \ BOOT_TARGET_DEVICES_PXE(func) \ BOOT_TARGET_DEVICES_DHCP(func) @@ -203,7 +203,6 @@ "kernel_addr_r=0x2000000\0" \ "scriptaddr=0x3000000\0" \ "ramdisk_addr_r=0x3100000\0" \ - DFU_ALT_INFO \ BOOTENV #endif