Hello, Roger!
Please don't top-post.
Roger Williamson schrieb:
The company we got he board from has become increasingly unhelpful,so I figured I'd contact the U-boot people since you are 1) bound to be more helpful, 2) have to be faster than a 1 week turn around time and 3) actually created this particular technology.
Thanks... my response time might be inversely proportional to the amount of blood in my caffeine. ;-)
Thank you for your advice. I finally have the datasheet for the LCDscreen, so I'll be modifiying the configuration for a little while. So it looks like a clocking issue. That seems resonable.
Check HSYNC, VSYNC and the Pixel CLK and the supply voltages if they are within the spec. (i.e. on the small standard TTL display interfaces) If the display controller has also a working driver on Linux' side, you should be able to figure out the right timing parameters for your display, too (embedded in some timing tables). Transfer that to U-Boot and see what happens.
As far as that notice goes... I didn't intentionally put that there,it must be my company trying to dodge any inferred responsibilty in this email, I'll try and remove it if I can.
Okay, some people propably won't help you if they care about this legal stuff more than I do.
Regards,
Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com