Hi Simon
On Fri, 2017-05-19 at 08:31 -0600, Simon Glass wrote:
Change this board to use a live device tree after relocation.
Signed-off-by: Simon Glass sjg@chromium.org
configs/nyan-big_defconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index a152ff6915..82be85a834 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -33,6 +33,7 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_ISO_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set +CONFIG_OF_LIVE=y CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y
Doing the same on dm/master for Apalis TK1 gives me the following:
U-Boot 2017.05-00795-g40fcab4-dirty (May 29 2017 - 16:52:17 +0200)
TEGRA124 DRAM: 2 GiB Error binding driver 'gpio_tegra': -22 Some drivers failed to bind initcall sequence fffad294 failed at call 80124360 (err=-22) ### ERROR ### Please RESET the board ###
Do you happen to know what may go wrong here?
I do actually even own a nyan-big but so far never run any mainline stuff on it as I am missing Servo and/or Yoshi et. al.
Is there any particular reason you did not do this on a more accessible platform like e.g. Jetson TK1?
BTW: The same happens on Jetson TK1 once I enable live tree:
U-Boot SPL 2017.05-00795-g40fcab4-dirty (May 29 2017 - 17:03:18) Trying to boot from RAM
U-Boot 2017.05-00795-g40fcab4-dirty (May 29 2017 - 17:03:18 +0200)
TEGRA124 Model: NVIDIA Jetson TK1 Board: NVIDIA Jetson TK1 DRAM: 2 GiB Error binding driver 'gpio_tegra': -22 Some drivers failed to bind initcall sequence fffa8ba4 failed at call 801235b8 (err=-22) ### ERROR ### Please RESET the board ###
Cheers
Marcel