Tested on commit 3ea0953d36023d7e50fb00b2e258d8fb2828aeac ("dm: Move pre-reloc init earlier to cope with board_early_init_f()") since the commit after that ("Set up stdio earlier when using driver model") hangs this board at "Net:" init, just like it hangs the sbc8548 board[1]. So, until that is resolved, this will be the newest functional baseline for both boards.
Boot up looks as follows:
------------------------------- U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40)
CPU: 8641D, Version: 2.0, (0x80900120) Core: e600 Core 0, Version: 2.2, (0x80040202) Clock Configuration: CPU:1000 MHz, MPX:400 MHz DDR:200 MHz (400 MT/s data rate), LBC:25 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled L2: 512 KiB enabled I2C: ready DRAM: 512 MiB Flash: 16 MiB SRIO1: disabled PCIe1: Root Complex, no link, regs @ 0xf8008000 PCIe1: Bus 00 - 00 PCIe2: Root Complex, no link, regs @ 0xf8009000 PCIe2: Bus 01 - 01 In: serial Out: serial Err: serial Net: eTSEC1, eTSEC2, eTSEC3, eTSEC4 Hit any key to stop autoboot: 0 => ver
U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40) powerpc-linux-gcc (GCC) 4.5.2 GNU ld (GNU Binutils) 2.21 => -------------------------------
As can be seen, the "generic" banner warning message is now gone.
[1] sbc8548 hang: https://www.marc.info/?l=u-boot&m=142655649417364&w=3
Signed-off-by: Paul Gortmaker paul.gortmaker@windriver.com --- include/configs/sbc8641d.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 20e7152b0952..32468453f524 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -20,6 +20,8 @@ #ifndef __CONFIG_H #define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD + /* High Level Configuration Options */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_SBC8641D 1 /* SBC8641D board specific */