Dear Wolfgang,
Thank you very much for your hints. This is a good staring point for me to continue with u-boot and Compact Flash.
Best Regards
Miroslaw Dach
-----Original Message----- From: Wolfgang Denk [mailto:wd@denx.de] Sent: Sat 1/22/2011 8:39 PM To: Dach Miroslaw Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] U-boot Config Parameters on Compact Flash
Dear "Dach Miroslaw",
In message 1B4F8000449511488D1A640DD6DECA350392A61B@MAILBOX0A.psi.ch you wrote:
Could you please direct me to some manual/"how to" to find out how to configure IDE access by means of the CONFIG_IDE_* . I have examined several header files in u-boot/include/configs and it seems to be that CONFIG_ATA_* could be/should be used in conjunction with CONFIG_IDE_*?
I'm not an expert with Xilinx FPGAs and have no idea what needs to be done to enable the ACE in them. A "grep SYS_ACE" in include/configs/* turns up only the icon and katmai boards that appearently enable a Xilinx ACE controll, but these are PPC440SPe boards, i. e. no Xilinx FPGA based solutions.
You will have to read the respective user manuals yourself.
Or hire an expert.
Best regards,
Wolfgang Denk