[PATCH] arm: dts: imx8mm-phyboard-polis-rdk: Sync dts files with kernel

Sync the devicetree files used in the kernel for the imx8mm-phyboard-polis with the corresponding devicetree files in U-Boot. Replaced phycore-imx8mm.dts with kernel dts imx8mm-phyboard-polis-rdk.dts

Synced with kernel 6.5.0-rc1 commit e752a4f9589c (arm64: dts: freescale: imx8mm-phyboard: Add I2C4 pinmuxing)

Signed-off-by: Cem Tenruh c.tenruh@phytec.de --- arch/arm/dts/Makefile | 2 +- ... => imx8mm-phyboard-polis-rdk-u-boot.dtsi} | 0 arch/arm/dts/imx8mm-phyboard-polis-rdk.dts | 460 ++++++++++++++++++ arch/arm/dts/imx8mm-phycore-som.dtsi | 440 +++++++++++++++++ arch/arm/dts/phycore-imx8mm.dts | 287 ----------- board/phytec/phycore_imx8mm/MAINTAINERS | 5 +- configs/phycore-imx8mm_defconfig | 2 +- 7 files changed, 905 insertions(+), 291 deletions(-) rename arch/arm/dts/{phycore-imx8mm-u-boot.dtsi => imx8mm-phyboard-polis-rdk-u-boot.dtsi} (100%) create mode 100644 arch/arm/dts/imx8mm-phyboard-polis-rdk.dts create mode 100644 arch/arm/dts/imx8mm-phycore-som.dtsi delete mode 100644 arch/arm/dts/phycore-imx8mm.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 17f506a8fa06..c8cb164de7ee 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -984,6 +984,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-kontron-bl-osm-s.dtb \ imx8mm-mx8menlo.dtb \ imx8mm-phg.dtb \ + imx8mm-phyboard-polis-rdk.dtb \ imx8mm-venice.dtb \ imx8mm-venice-gw71xx-0x.dtb \ imx8mm-venice-gw72xx-0x.dtb \ @@ -993,7 +994,6 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ imx8mm-venice-gw7903.dtb \ imx8mm-venice-gw7904.dtb \ imx8mm-verdin-wifi-dev.dtb \ - phycore-imx8mm.dtb \ imx8mn-bsh-smm-s2.dtb \ imx8mn-bsh-smm-s2pro.dtb \ imx8mn-ddr4-evk.dtb \ diff --git a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi similarity index 100% rename from arch/arm/dts/phycore-imx8mm-u-boot.dtsi rename to arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi diff --git a/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts b/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts new file mode 100644 index 000000000000..03e7679217b2 --- /dev/null +++ b/arch/arm/dts/imx8mm-phyboard-polis-rdk.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet t.remmet@phytec.de + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mm-phycore-som.dtsi" + +/ { + model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK"; + compatible = "phytec,imx8mm-phyboard-polis-rdk", + "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + chosen { + stdout-path = &uart3; + }; + + bt_osc_32k: bt-lp-clock { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "bt_osc_32k"; + #clock-cells = <0>; + }; + + can_osc_40m: can-clock { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + clock-output-names = "can_osc_40m"; + #clock-cells = <0>; + }; + + fan { + compatible = "gpio-fan"; + gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 13000 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + #cooling-cells = <2>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + }; + + led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_CPU; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + usdhc1_pwrseq: pwr-seq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <60>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + }; + + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "CAN_EN"; + startup-delay-us = <20>; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwrgrp>; + regulator-name = "usb_otg1_vbus"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; + + reg_vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3"; + }; +}; + +/* SPI - CAN MCP251XFD */ +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp251xfd"; + clocks = <&can_osc_40m>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_int>; + reg = <0>; + spi-max-frequency = <20000000>; + xceiver-supply = <&reg_can_en>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "", + "USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "BT_REG_ON", "WL_REG_ON", + "BT_DEV_WAKE", "BT_HOST_WAKE", "", "", + "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "FAN", "miniPCIe_nPERST", "", "", + "COEX1", "COEX2"; +}; + +&gpio5 { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "ECSPI1_SS0"; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +/* PCIe */ +&pcie0 { + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + assigned-clock-rates = <10000000>, <250000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + status = "okay"; +}; + +&rv3028 { + trickle-resistor-ohms = <3000>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +/* UART - RS232/RS485 */ +&uart1 { + assigned-clocks = <&clk IMX8MM_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART - Sterling-LWB Bluetooth */ +&uart2 { + assigned-clocks = <&clk IMX8MM_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + fsl,dte-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_bt>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&bt_osc_32k>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wakeup"; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_BOTH>; + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt>; + shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + vddio-supply = <&reg_vcc_3v3>; + }; +}; + +/* UART - console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + adp-disable; + dr_mode = "otg"; + over-current-active-low; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + srp-disable; + vbus-supply = <&reg_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; +}; + +/* SDIO - Sterling-LWB Wifi */ +&usdhc1 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + non-removable; + no-1-8-v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +/* SD-Card */ +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <&reg_usdhc2_vmmc>; + vqmmc-supply = <&reg_nvcc_sd2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00 + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00 + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00 + >; + }; + + pinctrl_can_en: can-engrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00 + >; + }; + + pinctrl_can_int: can-intgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x80 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x80 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x80 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00 + >; + }; + + pinctrl_fan: fan0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2 + >; + }; + + pinctrl_leds: leds1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 + MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x16 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x00 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x12 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x00 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x00 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x00 + >; + }; + + pinctrl_uart2_bt: uart2btgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x00 + MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x00 + MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x00 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_usbotg1pwrgrp: usbotg1pwrgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x00 + >; + }; +}; diff --git a/arch/arm/dts/imx8mm-phycore-som.dtsi b/arch/arm/dts/imx8mm-phycore-som.dtsi new file mode 100644 index 000000000000..92616bc4f71f --- /dev/null +++ b/arch/arm/dts/imx8mm-phycore-som.dtsi @@ -0,0 +1,440 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 PHYTEC Messtechnik GmbH + * Author: Teresa Remmet t.remmet@phytec.de + */ + +#include "imx8mm.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + model = "PHYTEC phyCORE-i.MX8MM"; + compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm"; + + aliases { + rtc0 = &rv3028; + rtc1 = &snvs_rtc; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + reg_vdd_3v3_s: regulator-vdd-3v3-s { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_S"; + }; +}; + +&A53_0 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <&reg_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <&reg_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750000000 { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +/* Ethernet */ +&fec1 { + fsl,magic-packet; + phy-mode = "rgmii-id"; + phy-handle = <&ethphy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + enet-phy-lane-no-swap; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + reg = <0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + reset-assert-us = <1000>; + reset-deassert-us = <1000>; + }; + }; +}; + +/* SPI Flash */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + som_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&gpio1 { + gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT", + "", "", "", "RESET_ETHPHY", + "", "", "nENABLE_FLATLINK"; +}; + +/* I2C1 */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default","gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@8 { + compatible = "nxp,pf8121a"; + reg = <0x08>; + + regulators { + reg_nvcc_sd1: ldo1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "NVCC_SD1 (LDO1)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_nvcc_sd2: ldo2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SD2 (LDO2)"; + vselect-en; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vcc_enet: ldo3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VCC_ENET_2V5 (LDO3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdda_1v8: ldo4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1500000>; + regulator-name = "VDDA_1V8 (LDO4)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1500000>; + regulator-suspend-max-microvolt = <1500000>; + }; + }; + + reg_soc_vdda_phy: buck1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <400000>; + regulator-suspend-max-microvolt = <400000>; + }; + }; + + reg_vdd_gpu_dram: buck2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "VDD_GPU_DRAM (BUCK2)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1000000>; + regulator-suspend-min-microvolt = <1000000>; + }; + }; + + reg_vdd_gpu: buck3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_VPU (BUCK3)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_mipi: buck4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <900000>; + regulator-name = "VDD_MIPI_0P9 (BUCK4)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_arm: buck5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <400000>; + regulator-name = "VDD_ARM (BUCK5)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_vdd_1v8: buck6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VDD_1V8 (BUCK6)"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-max-microvolt = <1800000>; + regulator-suspend-min-microvolt = <1800000>; + }; + }; + + reg_nvcc_dram: buck7 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-name = "NVCC_DRAM_1P1V (BUCK7)"; + }; + + reg_vsnvs: vsnvs { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "NVCC_SNVS_1P8 (VSNVS)"; + }; + }; + }; + + sn65dsi83: bridge@2d { + compatible = "ti,sn65dsi83"; + enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sn65dsi83>; + reg = <0x2d>; + status = "disabled"; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + vcc-supply = <&reg_vdd_3v3_s>; + }; + + rv3028: rtc@52 { + compatible = "microcrystal,rv3028"; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x52>; + }; +}; + +/* EMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + keep-power-in-suspend; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x2 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x2 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x16 + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x16 + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x16 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x16 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x16 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x16 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x10 + >; + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c0 + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c0 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1e0 + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1e0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0 + >; + }; + + pinctrl_sn65dsi83: sn65dsi83grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x26 + >; + }; +}; diff --git a/arch/arm/dts/phycore-imx8mm.dts b/arch/arm/dts/phycore-imx8mm.dts deleted file mode 100644 index e57dfd368d6b..000000000000 --- a/arch/arm/dts/phycore-imx8mm.dts +++ /dev/null @@ -1,287 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2019-2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet t.remmet@phytec.de - */ - -/dts-v1/; - -#include <dt-bindings/net/ti-dp83867.h> -#include "imx8mm.dtsi" - -/ { - model = "PHYTEC phyCORE-i.MX8MM"; - compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm"; - - chosen { - stdout-path = &uart3; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100>; - off-on-delay-us = <12000>; - }; -}; - -/* ethernet */ -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <&ethphy0>; - phy-reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - phy-reset-duration = <1>; - phy-reset-post-delay = <1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; - enet-phy-lane-no-swap; - }; - }; -}; - -/* SPI nor flash */ -&flexspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexspi0>; - status = "okay"; - - flash0: norflash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <80000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - }; -}; - -/* i2c eeprom */ -&i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; - status = "okay"; - - /* M24C32-D */ - i2c_eeprom: eeprom@51 { - compatible = "atmel,24c32"; - reg = <0x51>; - u-boot,i2c-offset-len = <2>; - }; - - /* M24C32-D Identification page */ - i2c_eeprom_id: eeprom@59 { - compatible = "atmel,24c32"; - reg = <0x59>; - u-boot,i2c-offset-len = <2>; - }; -}; - -/* debug console */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -/* sd-card */ -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <&reg_usdhc2_vmmc>; - status = "okay"; -}; - -/* eMMC */ -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -/* watchdog */ -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 - >; - }; - - pinctrl_flexspi0: flexspi0grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 - MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 - MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 - MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 - MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 - MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_i2c1_gpio: i2c1grp-gpio { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x1c3 - MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x1c3 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 - MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS b/board/phytec/phycore_imx8mm/MAINTAINERS index 9edec7b7d283..acffda61c040 100644 --- a/board/phytec/phycore_imx8mm/MAINTAINERS +++ b/board/phytec/phycore_imx8mm/MAINTAINERS @@ -2,8 +2,9 @@ phyCORE-i.MX8M Mini M: Teresa Remmet t.remmet@phytec.de W: https://www.phytec.eu/product-eu/system-on-modules/phycore-imx-8m-mini-nano/ S: Maintained -F: arch/arm/dts/phycore-imx8mm.dts -F: arch/arm/dts/phycore-imx8mm-u-boot.dtsi +F: arch/arm/dts/imx8mm-phyboard-polis-rdk.dts +F: arch/arm/dts/imx8mm-phycore-som.dtsi +F: arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi F: board/phytec/phycore_imx8mm/ F: configs/phycore-imx8mm_defconfig F: include/configs/phycore_imx8mm.h diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index ffdb5cce8eb5..ef0f240684b6 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -9,7 +9,7 @@ CONFIG_SF_DEFAULT_SPEED=80000000 CONFIG_ENV_SIZE=0x10000 CONFIG_ENV_OFFSET=0x3C0000 CONFIG_DM_GPIO=y -CONFIG_DEFAULT_DEVICE_TREE="phycore-imx8mm" +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-phyboard-polis-rdk" CONFIG_SPL_TEXT_BASE=0x7E1000 CONFIG_TARGET_PHYCORE_IMX8MM=y CONFIG_SYS_PROMPT="u-boot=> "