This adds initial support for the Hardkernel Odroid Go Ultra.
The Odroid Go Ultra is a portable gaming device with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging
The following are not yet handled: - Battery RK818 Gauge and Charging - 5inch 854×480 MIPI-DSI TFT LCD
Signed-off-by: Neil Armstrong neil.armstrong@linaro.org --- .../arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi | 16 +++++ configs/odroid-go-ultra_defconfig | 70 ++++++++++++++++++++++ doc/board/amlogic/index.rst | 4 +- doc/board/amlogic/odroid-go-ultra.rst | 34 +++++++++++ 4 files changed, 123 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi new file mode 100644 index 0000000000..00852f5e54 --- /dev/null +++ b/arch/arm/dts/meson-g12b-odroid-go-ultra-u-boot.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong neil.armstrong@linaro.org + */ + +#include "meson-g12-common-u-boot.dtsi" + +/* RK817/818 BOOST regulator aren't supported yet, so remove phandles from PHY nodes */ + +&usb2_phy1 { + /delete-property/ phy-supply; +}; + +&usb3_pcie_phy { + /delete-property/ phy-supply; +}; diff --git a/configs/odroid-go-ultra_defconfig b/configs/odroid-go-ultra_defconfig new file mode 100644 index 0000000000..a4d349fba4 --- /dev/null +++ b/configs/odroid-go-ultra_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="w400" +CONFIG_ARCH_MESON=y +CONFIG_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-go-ultra" +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" odroid-go-ultra" +CONFIG_SYS_LOAD_ADDR=0x1000000 +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 +CONFIG_REMAKE_ELF=y +CONFIG_OF_BOARD_SETUP=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ADC=y +CONFIG_SARADC_MESON=y +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y +CONFIG_BUTTON_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MESON=y +CONFIG_MMC_MESON_GX=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RESET=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_SYSINFO=y +CONFIG_SYSINFO_SMBIOS=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 4d407f9362..11443d9f2c 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -19,7 +19,8 @@ This matrix concerns the actual source code version. | | Nanopi-K2 | Khadas-VIM | Libretech-PC | JetHub J100 | SEI510 | Khadas-VIM3 | Khadas-VIM3L | | | P200 | LibreTech-CC v1 | WeTek Core2 | | Radxa Zero | GT-King/Pro | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 | -| | | JetHub J80 | | | | | BananaPi-M5 | +| | | JetHub J80 | | | | Odroid-Go- | BananaPi-M5 | +| | | | | | | Ultra | | +-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | +-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+ @@ -105,6 +106,7 @@ Board Documentation odroid-c2 odroid-c4 odroid-n2 + odroid-go-ultra p200 p201 p212 diff --git a/doc/board/amlogic/odroid-go-ultra.rst b/doc/board/amlogic/odroid-go-ultra.rst new file mode 100644 index 0000000000..8df9e0cb79 --- /dev/null +++ b/doc/board/amlogic/odroid-go-ultra.rst @@ -0,0 +1,34 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for ODROID-GO-ULTRA +========================== + +The Odroid Go Ultra is a portable gaming device with the following +characteristics: + + - Amlogic S922X SoC + - RK817 & RK818 PMICs + - 2GiB LPDDR4 + - On board 16GiB eMMC + - Micro SD Card slot + - 5inch 854×480 MIPI-DSI TFT LCD + - Earphone stereo jack, 0.5Watt 8Ω Mono speaker + - Li-Polymer 3.7V/4000mAh Battery + - USB-A 2.0 Host Connector + - x16 GPIO Input Buttons + - 2x ADC Analog Joysticks + - USB-C Port for USB2 Device and Charging + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-go-ultra_defconfig + $ make + +Image creation +-------------- + +Pleaser refer to :doc:`pre-generated-fip` with codename `odroid-go-ultra`