2010/11/19 Stefano Babic sbabic@denx.de:
On 11/19/2010 07:44 AM, Jason Liu wrote:
I think you are right. I did not have the mx27 board to do test. Thanks for test.
I only test it on mx51babbage board, the following is the output:
Net: got MAC address from fuse: 00:04:9f:00:f7:78 which is the same as the MAC address programmed on the board.
Do you have any other comments about this patch?
As I have not seen any other comments in the ML, I have tried to apply the patch and to test myself. From my point of view we have to be sure that the patch is working for all supported processors, and I can test it for i.MX27. As you already test it on i.MX51, can you test it on i.MX25 ? Or at least check with tracing if the address is correct for this processor, too ?
OK, if you have no other comments, I would like to send v7 to fix the mx27 and checkpatch issue per your review in order to avoid too much versions of patch. :(
But I don't have mx25 support board to test it. I just have one mx25 3ds board on hand but it seems that this board is not got support in uboot upstream currently.
Is there anyone on the ML can do me one favor to test it on MX25 like on karo/tx25?
Thanks in advance.
BR, Jason
Best regards, Stefano Babic
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================