The LCDC assigned rate is 0, it will make boot error, error log:"pll_para_config: the frequency can not be 0 Hz". Remove them, and the lcdc driver will do the correct clock rate setting.
Signed-off-by: David Wu david.wu@rock-chips.com ---
Changes in v3: - New patch
Changes in v2: None
arch/arm/dts/rk3288.dtsi | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi index da51878..2c8a616 100644 --- a/arch/arm/dts/rk3288.dtsi +++ b/arch/arm/dts/rk3288.dtsi @@ -604,19 +604,16 @@ u-boot,dm-pre-reloc; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, - <&cru PLL_GPLL>, <&cru PLL_CPLL>, + assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, <&cru PLL_NPLL>, <&cru ACLK_CPU>, <&cru HCLK_CPU>, <&cru PCLK_CPU>, <&cru ACLK_PERI>, <&cru HCLK_PERI>, <&cru PCLK_PERI>; - assigned-clock-rates = <0>, <0>, - <594000000>, <400000000>, + assigned-clock-rates = <594000000>, <400000000>, <500000000>, <300000000>, <150000000>, <75000000>, <300000000>, <150000000>, <75000000>; - assigned-clock-parents = <&cru PLL_NPLL>, <&cru PLL_GPLL>; };
grf: syscon@ff770000 {