Dear Sonic Zhang,
In message 1361257266-3722-2-git-send-email-sonic.adi@gmail.com you wrote:
Add header files for blackfin new processor bf60x.
...
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 3758 +++++++++++++++++++++
This is a bit excessive, isn't it? Do we really all thse many thousands lines of defines?
diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h new file mode 100644 index 0000000..39b740f --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h @@ -0,0 +1,3758 @@ +/* DO NOT EDIT THIS FILE
- Automatically generated by generate-def-headers.xsl
- DO NOT EDIT THIS FILE
- */
+#ifndef __BFIN_DEF_ADSP_BF609_proc__ +#define __BFIN_DEF_ADSP_BF609_proc__
+#include "../mach-common/ADSP-EDN-core_def.h"
+#define CNT_CFG 0xFFC00400 /* CNT0 Configuration Register */ +#define CNT_IMSK 0xFFC00404 /* CNT0 Interrupt Mask Register */ +#define CNT_STAT 0xFFC00408 /* CNT0 Status Register */ +#define CNT_CMD 0xFFC0040C /* CNT0 Command Register */ +#define CNT_DEBNCE 0xFFC00410 /* CNT0 Debounce Register */ +#define CNT_CNTR 0xFFC00414 /* CNT0 Counter Register */ +#define CNT_MAX 0xFFC00418 /* CNT0 Maximum Count Register */ +#define CNT_MIN 0xFFC0041C /* CNT0 Minimum Count Register */
+#define RSI_CLK_CONTROL 0xFFC00604 /* RSI0 Clock Control Register */ +#define RSI_ARGUMENT 0xFFC00608 /* RSI0 Argument Register */ +#define RSI_COMMAND 0xFFC0060C /* RSI0 Command Register */ +#define RSI_RESP_CMD 0xFFC00610 /* RSI0 Response Command Register */ +#define RSI_RESPONSE0 0xFFC00614 /* RSI0 Response 0 Register */ +#define RSI_RESPONSE1 0xFFC00618 /* RSI0 Response 1 Register */ +#define RSI_RESPONSE2 0xFFC0061C /* RSI0 Response 2 Register */ +#define RSI_RESPONSE3 0xFFC00620 /* RSI0 Response 3 Register */ +#define RSI_DATA_TIMER 0xFFC00624 /* RSI0 Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC00628 /* RSI0 Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0062C /* RSI0 Data Control Register */ +#define RSI_DATA_CNT 0xFFC00630 /* RSI0 Data Count Register */ +#define RSI_STATUS 0xFFC00634 /* RSI0 Status Register */ +#define RSI_STATUSCL 0xFFC00638 /* RSI0 Status Clear Register */ +#define RSI_IMSK0 0xFFC0063C /* RSI0 Interrupt 0 Mask Register */ +#define RSI_IMSK1 0xFFC00640 /* RSI0 Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC00648 /* RSI0 FIFO Counter Register */
...
I think I mentioned before that device registers have to be described using C structs in U-Boot, and proper I/O accessors must be used to access these.
In any case, please trim to the really needed definitions.
--- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/anomaly.h @@ -0,0 +1,103 @@ +/*
- DO NOT EDIT THIS FILE
- This file is under version control at
- svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
- and can be replaced with that version at any time
- DO NOT EDIT THIS FILE
This makes no sense to me.
- Copyright 2004-2012 Analog Devices Inc.
- Licensed under the ADI BSD license.
- */
I'm not sure if this has been discussed before - is this really GPL compatible?
Best regards,
Wolfgang Denk