Re: [U-Boot] [PATCH] mmc: mx6qsabrelite: fsl_esdhc: Define maximum bus width supported by SabreLite board

Hi Abbas,

On 03/25/2013 04:02 AM, Abbas Raza wrote:

Hi,

On 03/21/2013 09:17 PM, Eric Nelson wrote:

...

Thanks Abbas,

Tested-by: Eric Nelson eric.nelson@boundarydevices.com

Note that the board settings also apply to nitrogen6x and wandboard if you want to expand the patch a bit:

 http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/boundary/nitrogen6x/nitrogen6x.c;h=229c2378396d43a365d6682af35c0e519ccd69d4;hb=HEAD#l304
 http://git.denx.de/u-boot.git/?p=u-boot/u-boot-imx.git;a=blob;f=board/wandboard/wandboard.c;h=d95189f77de4c3573ec30c53e04fe1b083c1d2b5;hb=HEAD#l107

I would like to expand the patch but i cannot test it for boards you mentioned above. Are you sure these boards have 4-bit mmc buses?

Yes. The pin-mux settings confirm this. Nitrogen6x: http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=board/boundary/nitrogen...

Wandboard: http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=board/wandboard/wandboa...

Regards,

Eric