Re: [PATCH] crypto: Add driver for Aspeed HACE

On 5/18/21 9:09 AM, Joel Stanley wrote:

The HACE supports MD5, SHA1 and SHA2 family hash functions. This driver uses it in a polling mode to perform hash calculations over buffers placed in DRAM.

It registers a driver to allow the hardware's clocking to be enabled using the clock framework.

Co-developed-by: Klaus Heinrich Kiwi klaus@linux.vnet.ibm.com Signed-off-by: Klaus Heinrich Kiwi klaus@linux.vnet.ibm.com Signed-off-by: Joel Stanley joel@jms.id.au

---

configs/evb-ast2600_defconfig | 1 + drivers/crypto/Kconfig | 19 +++ drivers/crypto/Makefile | 1 + drivers/crypto/aspeed_hace.c | 256 ++++++++++++++++++++++++++++++++++ 4 files changed, 277 insertions(+) create mode 100644 drivers/crypto/aspeed_hace.c

diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig index 91518dbe3589..52ae8e423bfd 100644 --- a/configs/evb-ast2600_defconfig +++ b/configs/evb-ast2600_defconfig @@ -45,6 +45,7 @@ CONFIG_REGMAP=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y +CONFIG_ASPEED_HACE=y CONFIG_DM_I2C=y CONFIG_MISC=y CONFIG_SPL_MISC=y diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 1ea116be7503..e92037d88906 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -2,4 +2,23 @@ menu "Hardware crypto devices"

source drivers/crypto/fsl/Kconfig

+config ASPEED_HACE

• bool "ASPEED Hash and Crypto Engine"
• depends on ASPEED_AST2600
• imply SHA_HW_ACCEL
• imply SHA_PROG_HW_ACCEL
• imply SHA512
• imply SHA512_ALGO
• imply CMD_HASH
• help

• Select this option to enable a driver for using the SHA engine in
  

• the ASPEED BMC SoCs.
  

• Enabling this allows the use of SHA operations in hardware without requiring the
  

• SHA software implementations, saving code size.
  

• Due to hardware limitations it cannot be used with a FIT placed in SPI
  

• FLASH. Data can only be hashed if it is in SDRAM, making this relevant
  

• for MMC and network boot only.
  

endmenu diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile index efbd1d3fca05..ac93b1295954 100644 --- a/drivers/crypto/Makefile +++ b/drivers/crypto/Makefile @@ -4,5 +4,6 @@ # http://www.samsung.com

obj-$(CONFIG_EXYNOS_ACE_SHA) += ace_sha.o +obj-$(CONFIG_ASPEED_HACE) += aspeed_hace.o obj-y += rsa_mod_exp/ obj-y += fsl/ diff --git a/drivers/crypto/aspeed_hace.c b/drivers/crypto/aspeed_hace.c new file mode 100644 index 000000000000..941c1555fe5c --- /dev/null +++ b/drivers/crypto/aspeed_hace.c @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// (C) Copyright ASPEED Technology Inc. +// Copyright 2021 IBM Corp.

+#include <common.h> +#include <clk.h>

+#include <log.h> +#include <asm/io.h> +#include <malloc.h> +#include <hash.h>

+#include <dm/device.h> +#include <dm/fdtaddr.h>

+#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/iopoll.h>

+#define ASPEED_HACE_STS 0x1C +#define HACE_RSA_ISR BIT(13) +#define HACE_CRYPTO_ISR BIT(12) +#define HACE_HASH_ISR BIT(9) +#define HACE_RSA_BUSY BIT(2) +#define HACE_CRYPTO_BUSY BIT(1) +#define HACE_HASH_BUSY BIT(0) +#define ASPEED_HACE_HASH_SRC 0x20 +#define ASPEED_HACE_HASH_DIGEST_BUFF 0x24 +#define ASPEED_HACE_HASH_KEY_BUFF 0x28 +#define ASPEED_HACE_HASH_DATA_LEN 0x2C +#define HACE_SG_LAST BIT(31) +#define ASPEED_HACE_HASH_CMD 0x30 +#define HACE_SHA_BE_EN BIT(3) +#define HACE_MD5_LE_EN BIT(2) +#define HACE_ALGO_MD5 0 +#define HACE_ALGO_SHA1 BIT(5) +#define HACE_ALGO_SHA224 BIT(6) +#define HACE_ALGO_SHA256 (BIT(4) | BIT(6)) +#define HACE_ALGO_SHA512 (BIT(5) | BIT(6)) +#define HACE_ALGO_SHA384 (BIT(5) | BIT(6) | BIT(10)) +#define HACE_SG_EN BIT(18)

+#define ASPEED_MAX_SG 32

It would nice to have a struct aspeed_hace describing the register layout.

+struct aspeed_sg {

• u32 len;
• u32 addr;

+};

+struct aspeed_hash_ctx {

• u32 method;
• u32 digest_size;
• u32 len;
• u32 count;
• struct aspeed_sg list[ASPEED_MAX_SG]; /* Must be 8 byte aligned */

+};

Shouldn't we use __aligned(8); ?

+struct aspeed_hace {

• struct clk clk;

+};

+static phys_addr_t base;

+static int aspeed_hace_wait_completion(u32 reg, u32 flag, int timeout_us) +{

• u32 val;
• return readl_poll_timeout(reg, val, (val & flag) == flag, timeout_us);

+}

+static int digest_object(const void *src, unsigned int length, void *digest, u32 method) +{

• if (!((u32)src & BIT(31))) {

• debug("HACE src out of bounds: can only copy from SDRAM\n");
  

• return -EINVAL;
  

• }
• if ((u32)digest & 0x7) {

• debug("HACE dest alignment incorrect: %p\n", digest);
  

• return -EINVAL;
  

• }
• if (readl(base + ASPEED_HACE_STS) & HACE_HASH_BUSY) {

• debug("HACE error: engine busy\n");
  

• return -EBUSY;
  

• }
• /* Clear pending completion status */
• writel(HACE_HASH_ISR, base + ASPEED_HACE_STS);
• writel((u32)src, base + ASPEED_HACE_HASH_SRC);
• writel((u32)digest, base + ASPEED_HACE_HASH_DIGEST_BUFF);
• writel(length, base + ASPEED_HACE_HASH_DATA_LEN);
• writel(HACE_SHA_BE_EN | method, base + ASPEED_HACE_HASH_CMD);
• /* SHA512 hashing appears to have a througput of about 12MB/s */
• return aspeed_hace_wait_completion(base + ASPEED_HACE_STS,

• 	HACE_HASH_ISR,
  

• 	1000 + (length >> 3));
  

+}

+void hw_sha1(const unsigned char *pbuf, unsigned int buf_len,

•     unsigned char *pout, unsigned int chunk_size)
  

+{

• int rc;
• rc = digest_object(pbuf, buf_len, pout, HACE_ALGO_SHA1);
• if (rc)

• debug("HACE failure: %d\n", rc);
  

+}

+void hw_sha256(const unsigned char *pbuf, unsigned int buf_len,

•       unsigned char *pout, unsigned int chunk_size)
  

+{

• int rc;
• rc = digest_object(pbuf, buf_len, pout, HACE_ALGO_SHA256);
• if (rc)

• debug("HACE failure: %d\n", rc);
  

+}

+void hw_sha512(const unsigned char *pbuf, unsigned int buf_len,

•       unsigned char *pout, unsigned int chunk_size)
  

+{

• int rc;
• rc = digest_object(pbuf, buf_len, pout, HACE_ALGO_SHA512);
• if (rc)

• debug("HACE failure: %d\n", rc);
  

+}

+int hw_sha_init(struct hash_algo *algo, void **ctxp) +{

• struct aspeed_hash_ctx *ctx;
• u32 method;
• if (!strcmp(algo->name, "sha1"))

• method = HACE_ALGO_SHA1;
  

• else if (!strcmp(algo->name, "sha256"))

• method = HACE_ALGO_SHA256;
  

• else if (!strcmp(algo->name, "sha512"))

• method = HACE_ALGO_SHA512;
  

• else

• return -ENOTSUPP;
  

• }
• ctx = memalign(8, sizeof(*ctx));

ARCH_DMA_MINALIGN ?

• if (!ctx) {

• debug("HACE error: Cannot allocate memory for context\n");
  

• return -ENOMEM;
  

• }
• memset(ctx, '\0', sizeof(*ctx));
• if (((uintptr_t)ctx->list & 0x3) != 0) {

• printf("HACE error: Invalid alignment for input data\n");
  

• return -EINVAL;
  

• }
• ctx->method = method | HACE_SG_EN;
• ctx->digest_size = algo->digest_size;
• *ctxp = ctx;
• return 0;

+}

+int hw_sha_update(struct hash_algo *algo, void *hash_ctx, const void *buf,

•   unsigned int size, int is_last)
  

+{

• struct aspeed_hash_ctx *ctx = hash_ctx;
• struct aspeed_sg *sg = &ctx->list[ctx->count];
• if (ctx->count >= ARRAY_SIZE(ctx->list)) {

• debug("HACE error: Reached maximum number of hash segments\n");
  

• free(ctx);
  

• return -EINVAL;
  

• }
• sg->addr = (u32)buf;
• sg->len = size;
• if (is_last)

• sg->len |= HACE_SG_LAST;
  

• ctx->count++;
• ctx->len += size;
• return 0;

+}

+int hw_sha_finish(struct hash_algo *algo, void *hash_ctx, void *dest_buf, int size) +{

• struct aspeed_hash_ctx *ctx = hash_ctx;
• int rc;
• if (size < ctx->digest_size) {

• debug("HACE error: insufficient size on destination buffer\n");
  

• free(ctx);
  

• return -EINVAL;
  

• }
• rc = digest_object(ctx->list, ctx->len, dest_buf, ctx->method);
• if (rc)

• debug("HACE Scatter-Gather failure\n");
  

• free(ctx);
• return rc;

+}

+static int aspeed_hace_probe(struct udevice *dev) +{

• struct aspeed_hace *hace = dev_get_priv(dev);
• int ret;
• ret = clk_get_by_index(dev, 0, &hace->clk);
• if (ret < 0) {

• debug("Can't get clock for %s: %d\n", dev->name, ret);
  

• return ret;
  

• }
• ret = clk_enable(&hace->clk);
• if (ret) {

• debug("Failed to enable fsi clock (%d)\n", ret);
  

• return ret;
  

• }
• /* As the crypto code does not pass us any driver state */
• base = devfdt_get_addr(dev);
• return ret;

+}

+static int aspeed_hace_remove(struct udevice *dev) +{

• struct aspeed_hace *hace = dev_get_priv(dev);
• clk_disable(&hace->clk);
• return 0;

+}

+static const struct udevice_id aspeed_hace_ids[] = {

• { .compatible = "aspeed,ast2600-hace" },
• { }

+};

+U_BOOT_DRIVER(aspeed_hace) = {

• .name = "aspeed_hace",
• .id = UCLASS_MISC,
• .of_match = aspeed_hace_ids,
• .probe = aspeed_hace_probe,
• .remove = aspeed_hace_remove,
• .priv_auto = sizeof(struct aspeed_hace),

+};