Given that even a fixed-link has an associated phy_device, there is no reason to operate in a mode when dm_eth_phy_connect fails.
Remove the driver checks for a NULL priv->phy and just return -ENODEV when that happens.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com --- drivers/net/fsl_enetc.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c index f6fc7801b95b..5961775024ff 100644 --- a/drivers/net/fsl_enetc.c +++ b/drivers/net/fsl_enetc.c @@ -281,21 +281,20 @@ static void enetc_start_pcs(struct udevice *dev) }
/* Configure the actual/external ethernet PHY, if one is found */ -static void enetc_config_phy(struct udevice *dev) +static int enetc_config_phy(struct udevice *dev) { struct enetc_priv *priv = dev_get_priv(dev); int supported;
priv->phy = dm_eth_phy_connect(dev); - if (!priv->phy) - return; + return -ENODEV;
supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full; priv->phy->supported &= supported; priv->phy->advertising &= supported;
- phy_config(priv->phy); + return phy_config(priv->phy); }
/* @@ -335,9 +334,8 @@ static int enetc_probe(struct udevice *dev) dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
enetc_start_pcs(dev); - enetc_config_phy(dev);
- return 0; + return enetc_config_phy(dev); }
/* @@ -550,8 +548,7 @@ static int enetc_start(struct udevice *dev)
enetc_setup_mac_iface(dev);
- if (priv->phy) - phy_startup(priv->phy); + phy_startup(priv->phy);
return 0; }