24 May
2004
24 May
'04
6:49 p.m.
In message 001201c441a3$1efa2080$3136a8c0@sassenage.massy.thalesees.com you wrote:
I want to port it to an ML300 Board keeping in mind that I must only put the configuration of the FPGA and the U-boot code in the compact Flash memory. (I must erase the contents of the compact flash given by xilinx)
Please explain what you have in mind. Put U-boot code in the CompactFlash?
You cannot run U-boot from a CmpactFlash card. You must use some real ROM.
------=_NextPart_000_000F_01C441B3.E22A4930 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
And please, NEVER post HTML to this list. Never!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de
PoB = "Prisoner of Bill" -- those held captive, unwillingly or other-
wise, by the contemptible Microsoft monopoly.
-- Tom Christiansen in 6abo45$3lc$2@csnews.cs.colorado.edu