Hi I have board pxa300 and want to run simple hello_ world.bin binary in uboot
I am able to load hello_world.bin through tftp ,but when I give go command it comes out of the application.
I checked load addr also its 80008000. please check the log below
*$ tftpboot 0x80008000 hello_world.bin * Enabling external transiver signal for LAN DRIVER_VERSION : 110, DATECODE : 080408 LAN9x18 (0x118a0000) detected. start Auto negotiation... (take ~2sec) Auto negotiation complete, 100BaseTX, full duplex TFTP from server 10.1.1.72; our IP address is 10.1.1.100 Filename 'hello_world.bin'. Load address: 0x80008000 Loading: T # done Bytes transferred = 624 (270 hex)
*$ go 0x80008000*
## Starting application at 0x80008000 ... ## Application terminated, rc = 0x0
Dont know whether address what iam giving is wrong
Regards Utkarsh Rawat
-- View this message in context: http://u-boot.10912.n7.nabble.com/running-test-application-uboot-hello-world... Sent from the U-Boot mailing list archive at Nabble.com.