Instead of the bash script, use binman to generate the FIT for arm64.
For 32-bit boards, use binman for all images, dropping the intermediate files.
With this change, only Zynq is now using SPL_FIT_GENERATOR so update the Kconfig rule accordingly.
Clean up the Makefile to the extent possible. Unfortunately, two boards do not use SPL_FRAMEWORK so don't enable the u-boot.img rule:
evb-rk3036 kylin-rk3036
So a small remnant remains.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
Makefile | 39 ++------------------------------------- boot/Kconfig | 2 +- 2 files changed, 3 insertions(+), 38 deletions(-)
diff --git a/Makefile b/Makefile index 9ef34ca4b7..8f149fa3a4 100644 --- a/Makefile +++ b/Makefile @@ -977,19 +977,8 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) INPUTS-y += u-boot-with-dtb.bin endif
-ifeq ($(CONFIG_ARCH_ROCKCHIP),y) -# On ARM64 this target is produced by binman so we don't need this dep -ifeq ($(CONFIG_ARM64),y) -ifeq ($(CONFIG_SPL),y) -# TODO: Get binman to generate this too -INPUTS-y += u-boot-rockchip.bin -endif -else -ifeq ($(CONFIG_SPL),y) -# Generate these inputs for binman which will create the output files -INPUTS-y += idbloader.img u-boot.img -endif -endif +ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_) +INPUTS-y += u-boot.img endif
INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \ @@ -1474,30 +1463,6 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat)
-ifeq ($(CONFIG_ARCH_ROCKCHIP),y) - -# TPL + SPL -ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy) -MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd -tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE - $(call if_changed,mkimage) -idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE - $(call if_changed,cat) -else -MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd -idbloader.img: spl/u-boot-spl.bin FORCE - $(call if_changed,mkimage) -endif - -ifeq ($(CONFIG_ARM64),y) -OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \ - --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE - $(call if_changed,pad_cat) -endif # CONFIG_ARM64 - -endif # CONFIG_ARCH_ROCKCHIP - ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
diff --git a/boot/Kconfig b/boot/Kconfig index b83a4e8400..ae1a37ae92 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -275,7 +275,7 @@ config SPL_FIT_SOURCE
config USE_SPL_FIT_GENERATOR bool "Use a script to generate the .its script" - default y if SPL_FIT && (!ARCH_SUNXI && !RISCV) + default y if SPL_FIT && ARCH_ZYNQMP
config SPL_FIT_GENERATOR string ".its file generator script for U-Boot FIT image"