Adds an fdt.c file in that defines the ft_cpu_setup() function, which should be called from a board-specific ft_board_setup()). This ft_cpu_setup() will currently do nothing for non-secure (GP) devices but contains pertinent updates for booting on secure (HS) devices.
Update the omap5 Makefile to include the fdt.c in the build.
Signed-off-by: Daniel Allred d-allred@ti.com Signed-off-by: Madan Srinivas madans@ti.com --- arch/arm/cpu/armv7/omap5/Makefile | 1 + arch/arm/cpu/armv7/omap5/fdt.c | 183 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 184 insertions(+) create mode 100644 arch/arm/cpu/armv7/omap5/fdt.c
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index f2930d5..3caba86 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -12,4 +12,5 @@ obj-y += sdram.o obj-y += prcm-regs.o obj-y += hw_data.o obj-y += abb.o +obj-y += fdt.o obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/cpu/armv7/omap5/fdt.c new file mode 100644 index 0000000..f2f40f0 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/fdt.c @@ -0,0 +1,183 @@ +/* + * Copyright 2016 Texas Instruments, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <malloc.h> + +#include <asm/omap_common.h> +#include <asm/arch-omap5/sys_proto.h> + +#ifdef CONFIG_TI_SECURE_DEVICE + +/* Give zero values if not already defined */ +#ifndef CONFIG_SECURE_BOOT_SRAM +#define CONFIG_SECURE_BOOT_SRAM (0) +#endif +#ifndef CONFIG_SECURE_RUN_SRAM +#define CONFIG_SECURE_RUN_SRAM (0) +#endif + +static u32 hs_irq_skip[] = { + 8, /* Secure violation reporting interrupt */ + 15, /* One interrupt for SDMA by secure world */ + 118 /* One interrupt for Crypto DMA by secure world */ +}; + +static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd) +{ + const char *path; + int offs; + int ret; + int len, i, old_cnt, new_cnt; + u32 *temp; + const u32 *p_data; + + /* + * Increase the size of the fdt + * so we have some breathing room + */ + ret = fdt_increase_size(fdt, 512); + if (ret < 0) { + printf("Could not increase size of device tree: %s\n", + fdt_strerror(ret)); + return ret; + } + + /* Reserve IRQs that are used/needed by secure world */ + path = "/ocp/crossbar"; + offs = fdt_path_offset(fdt, path); + if (offs < 0) { + debug("Node %s not found.\n", path); + return 0; + } + + /* Get current entries */ + p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len); + if (p_data) + old_cnt = len / sizeof(u32); + else + old_cnt = 0; + + new_cnt = sizeof(hs_irq_skip) / + sizeof(hs_irq_skip[0]); + + /* Create new/updated skip list for HS parts */ + temp = malloc(sizeof(u32) * (old_cnt + new_cnt)); + for (i = 0; i < new_cnt; i++) + temp[i] = cpu_to_fdt32(hs_irq_skip[i]); + for (i = 0; i < old_cnt; i++) + temp[i + new_cnt] = p_data[i]; + + /* Blow away old data and set new data */ + fdt_delprop(fdt, offs, "ti,irqs-skip"); + ret = fdt_setprop(fdt, offs, "ti,irqs-skip", + temp, + (old_cnt + new_cnt) * sizeof(u32)); + free(temp); + + /* Check if the update worked */ + if (ret < 0) { + printf("Could not add ti,irqs-skip property to node %s: %s\n", + path, fdt_strerror(ret)); + return ret; + } + + return 0; +} + +static int ft_hs_disable_rng(void *fdt, bd_t *bd) +{ + const char *path; + int offs; + int ret; + + /* Make HW RNG reserved for secure world use */ + path = "/ocp/rng"; + offs = fdt_path_offset(fdt, path); + if (offs < 0) { + debug("Node %s not found.\n", path); + return 0; + } + ret = fdt_setprop_string(fdt, offs, + "status", "disabled"); + if (ret < 0) { + printf("Could not add status property to node %s: %s\n", + path, fdt_strerror(ret)); + return ret; + } + return 0; +} + +#if (CONFIG_SECURE_BOOT_SRAM != 0) || (CONFIG_SECURE_RUN_SRAM != 0) +static int ft_hs_fixup_sram(void *fdt, bd_t *bd) +{ + const char *path; + int offs; + int ret; + u32 temp[2]; + + /* + * Update SRAM reservations on secure devices. The OCMC RAM + * is always reserved for secure use from the start of that + * memory region + */ + path = "/ocp/ocmcram@40300000/sram-hs"; + offs = fdt_path_offset(fdt, path); + if (offs < 0) { + debug("Node %s not found.\n", path); + return 0; + } + + /* relative start offset */ + temp[0] = cpu_to_fdt32(0); + /* reservation size */ + temp[1] = cpu_to_fdt32(max(CONFIG_SECURE_BOOT_SRAM, + CONFIG_SECURE_RUN_SRAM)); + fdt_delprop(fdt, offs, "reg"); + ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32)); + if (ret < 0) { + printf("Could not add reg property to node %s: %s\n", + path, fdt_strerror(ret)); + return ret; + } + + return 0; +} +#else +static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; } +#endif + +static void ft_hs_fixups(void *fdt, bd_t *bd) +{ + /* Check we are running on an HS/EMU device type */ + if (GP_DEVICE != get_device_type()) { + if ((ft_hs_fixup_crossbar(fdt, bd) == 0) && + (ft_hs_disable_rng(fdt, bd) == 0) && + (ft_hs_fixup_sram(fdt, bd) == 0)) + return; + } else { + printf("ERROR: Incorrect device type (GP) detected!"); + } + /* Fixup failed or wrong device type */ + hang(); +} +#else +static void ft_hs_fixups(void *fdt, bd_t *bd) +{ +} +#endif + +/* + * Place for general cpu/SoC FDT fixups. Board specific + * fixups should remain in the board files which is where + * this function should be called from. + */ +void ft_cpu_setup(void *fdt, bd_t *bd) +{ + ft_hs_fixups(fdt, bd); +}