Did you have any success with your Cirrus Logic EDB93xx and cpu/arm920t/ep93xx???
No :( I was just writing you an email when I received yours. I tried to change both cpu/arm920t/Makefile and cpu/arm920t/ep93xx/Makefile but I was not able even to build the sources ...
My first attempt to do something like ...
After getting your email I changed the two Makefiles as follows:
################################################################## # cpu/arm920t/Makefile
include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
# Processor-specific subdirs SUBDIRS = ep93xx .PHONY : $(SUBDIRS)
START = start.o OBJS = cpu.o \ imx_generic.o imx_interrupts.o imx_speed.o \ interrupts.o \ s3c24x0_interrupts.o s3c24x0_serial.o s3c24x0_speed.o \ usb_ohci.o
all: .depend $(START) $(LIB) $(SUBDIRS)
$(LIB): $(OBJS) $(AR) crv $@ $(OBJS)
$(SUBDIRS): $(MAKE) -C $@ all
#########################################################################
.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
sinclude .depend
#########################################################################
################################################################## # cpu/arm920t/ep93xx/Makefile
include $(TOPDIR)/config.mk
LIB = ../lib$(CPU).a
OBJS = eth.o ep93xx_interrupts.o \ serial.o speed.o
all: .depend $(LIB)
$(LIB): $(OBJS) $(AR) crv $@ $(OBJS)
.depend: Makefile $(OBJS:.o=.c) $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
sinclude .depend
The build has been completed successfully. According to you is this solution ok? Wolfang?
llandre
DAVE Electronics System House - R&D Department web: http://www.dave-tech.it email: r&d2@dave-tech.it