This file indicates which options are not for use in U-Boot SPL. It allows the kconfig tool to correctly generate its output.
It was generated with
./tools/move_config.py --scan-source -u
Note that this only produces sensible results when used with the current source code, as of this patch. Following patches adjust the code, e.g. to drop use of CONFIG_IS_ENABLED(), so the program will not produce anything useful when run on that version of the code.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
scripts/conf_nospl | 91 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 scripts/conf_nospl
diff --git a/scripts/conf_nospl b/scripts/conf_nospl new file mode 100644 index 00000000000..f35f276c608 --- /dev/null +++ b/scripts/conf_nospl @@ -0,0 +1,91 @@ +# Options which are never enabled in SPL. + +Generally, options which have no SPL_ prefix (e.g. CONFIG_FOO) apply to all +SPL build phases. This allows things like ARCH_ARM to propagate to all builds +without the hassle of generating a separate SPL version fo each phase. But in +some cases this is not wanted. + +This file lists options which don't have an SPL equivalent, but still should not +be enabled in SPL builds. It is necessary since kconfig cannot tell (just by +looking at the Kconfig description) whether it applies to Proper builds only, +or to all builds. + +ACPI_PMC_SANDBOX +BINMAN_FDT +CLK_INTEL +CMD_MMC_RPMB +CMD_MMC_SWRITE +DFU_MMC +DFU_MTD +DFU_NAND +DFU_SF +DFU_SF_PART +DFU_WRITE_ALT +DMA_LEGACY +DM_DMA +DM_EVENT +DM_REGULATOR_ANATOP +DM_REGULATOR_PBIAS +DM_REGULATOR_STM32_VREFBUF +DM_STDIO +DWC_AHSATA_AHCI +EFI_DT_FIXUP +EFI_EBBR_2_1_CONFORMANCE +EFI_SCROLL_ON_CLEAR_SCREEN +EFI_UNICODE_CAPITALIZATION +ENV_APPEND +EVENT_DEBUG +EXYNOS7870 +EXYNOS7880 +FASTBOOT_UUU_SUPPORT +FRED +FRU_SC +INTEL_GENERIC_WIFI +LOG_SYSLOG +LS2_SFP +MALTA +MEMSIZE_IN_BYTES +MIPS_BOOT_CMDLINE_LEGACY +MIPS_BOOT_ENV_LEGACY +MIPS_BOOT_FDT +MMC_HW_PARTITIONING +MMC_VERBOSE +MSCODE_PARSER +MUX_MMIO +NAND_CS_INIT +NO_FB_CLEAR +OFNODE_MULTI_TREE +PCF8575_GPIO +PHY_J721E_WIZ +PKCS7_MESSAGE_PARSER +PKCS7_VERIFY +PLATDATA +PRE_CONSOLE_BUFFER +REGULATOR_RK8XX +RESTORE_EXCEPTION_VECTOR_BASE +ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON +SERIAL_PUTS +SERIAL_RX_BUFFER +SHA512_HW_ACCEL +SILENT_CONSOLE_UPDATE_ON_RELOC +SILENT_CONSOLE_UPDATE_ON_SET +SIMPLE_BUS_CORRECT_RANGE +SMC911X_32_BIT +SPI_DIRMAP +SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT +STM32_ETZPC +SYSRESET_AT91 +SYSRESET_X86 +SYS_DEVICE_NULLDEV +SYS_WHITE_ON_BLACK +TARGET_DENEB +TARGET_EVB_RK3399 +TARGET_GIEDI +TARGET_ST_STM32MP15X +TURRIS_OMNIA_MCU +USB_GADGET_OS_DESCRIPTORS +UT_DM +UT_UNICODE +X509_CERTIFICATE_PARSER +XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP +XILINX_MICROBLAZE0_USR_EXCEP